I have not worked with this chip before. I am using assembler and IAR
Version 6.52. I have a USB-FET and a target board. In the past I have
programmed the FR5728 without any problems. It does not recognise the
device. I select this device in the options tab. I also select the
MSP430F5XX heading as there is none for the FR57XX. There is only the FR59XX
but this is for C only.
Has anyone experienced this before?
Peter
Problem loading my program into a MSP430FR5729
Started by ●February 18, 2015
Reply by ●February 18, 20152015-02-18
Peter, I am running assembler and Kickstart versions show as 5.60.7 and
6.6.4.2867 in the About tab. This is downloaded as slac050aq.zip. I
believe there are later versions but this definitely includes an option
for the MSP430FR5728. This option opens differently than older versions,
where you got one huge list to the side, now there are individual liosts
for each family, with the FR versions are shown as the fourth from top
choice. I don't have anything with a 5728 on it but it will link to the
old FR57xx EVK
Al
On 18/02/2015 7:03 PM, 'Peter Grey' m...@ozemail.com.au [msp430] wrote:
> I have not worked with this chip before. I am using assembler and IAR
> Version 6.52. I have a USB-FET and a target board. In the past I have
> programmed the FR5728 without any problems. It does not recognise the
> device. I select this device in the options tab. I also select the
> MSP430F5XX heading as there is none for the FR57XX. There is only the
> FR59XX but this is for C only.
>
> Has anyone experienced this before?
>
> Peter
6.6.4.2867 in the About tab. This is downloaded as slac050aq.zip. I
believe there are later versions but this definitely includes an option
for the MSP430FR5728. This option opens differently than older versions,
where you got one huge list to the side, now there are individual liosts
for each family, with the FR versions are shown as the fourth from top
choice. I don't have anything with a 5728 on it but it will link to the
old FR57xx EVK
Al
On 18/02/2015 7:03 PM, 'Peter Grey' m...@ozemail.com.au [msp430] wrote:
> I have not worked with this chip before. I am using assembler and IAR
> Version 6.52. I have a USB-FET and a target board. In the past I have
> programmed the FR5728 without any problems. It does not recognise the
> device. I select this device in the options tab. I also select the
> MSP430F5XX heading as there is none for the FR57XX. There is only the
> FR59XX but this is for C only.
>
> Has anyone experienced this before?
>
> Peter
Reply by ●February 18, 20152015-02-18
Thanks Al. Another difficulty I have is that I cannot get a license number from
IAR. It says that the license I have is an older version. (I have removed all
other versions from my system using “add/remove programs”). It then
comes up with a window asking about renewal and I click on it but it says there
is nothing for me. I presume this is because I did not pay for it?? I am trying
another board this morning and I will see what happens.
Peter
From: m... [mailto:m...]
Sent: Wednesday, 18 February 2015 7:27 PM
To: m...
Subject: Re: [msp430] Problem loading my program into a MSP430FR5729
Peter, I am running assembler and Kickstart versions show as 5.60.7 and 6.6.4.2867 in the About tab. This is downloaded as slac050aq.zip. I believe there are later versions but this definitely includes an option for the MSP430FR5728. This option opens differently than older versions, where you got one huge list to the side, now there are individual liosts for each family, with the FR versions are shown as the fourth from top choice. I don't have anything with a 5728 on it but it will link to the old FR57xx EVK
Al
On 18/02/2015 7:03 PM, 'Peter Grey' m...@ozemail.com.au [msp430] wrote:
I have not worked with this chip before. I am using assembler and IAR Version 6.52. I have a USB-FET and a target board. In the past I have programmed the FR5728 without any problems. It does not recognise the device. I select this device in the options tab. I also select the MSP430F5XX heading as there is none for the FR57XX. There is only the FR59XX but this is for C only.
Has anyone experienced this before?
Peter
Peter
From: m... [mailto:m...]
Sent: Wednesday, 18 February 2015 7:27 PM
To: m...
Subject: Re: [msp430] Problem loading my program into a MSP430FR5729
Peter, I am running assembler and Kickstart versions show as 5.60.7 and 6.6.4.2867 in the About tab. This is downloaded as slac050aq.zip. I believe there are later versions but this definitely includes an option for the MSP430FR5728. This option opens differently than older versions, where you got one huge list to the side, now there are individual liosts for each family, with the FR versions are shown as the fourth from top choice. I don't have anything with a 5728 on it but it will link to the old FR57xx EVK
Al
On 18/02/2015 7:03 PM, 'Peter Grey' m...@ozemail.com.au [msp430] wrote:
I have not worked with this chip before. I am using assembler and IAR Version 6.52. I have a USB-FET and a target board. In the past I have programmed the FR5728 without any problems. It does not recognise the device. I select this device in the options tab. I also select the MSP430F5XX heading as there is none for the FR57XX. There is only the FR59XX but this is for C only.
Has anyone experienced this before?
Peter
Reply by ●February 18, 20152015-02-18
I just ignore it, and have had no problems
Al
On 19/02/2015 12:17 PM, 'Peter Grey' m...@ozemail.com.au [msp430] wrote:
> Thanks Al. Another difficulty I have is that I cannot get a license
> number from IAR. It says that the license I have is an older version.
> (I have removed all other versions from my system using “add/remove
> programs”). It then comes up with a window asking about renewal and I
> click on it but it says there is nothing for me. I presume this is
> because I did not pay for it?? I am trying another board this morning
> and I will see what happens.
>
> Peter
>
> *From:*m... [mailto:m...]
> *Sent:* Wednesday, 18 February 2015 7:27 PM
> *To:* m...
> *Subject:* Re: [msp430] Problem loading my program into a MSP430FR5729
>
> Peter, I am running assembler and Kickstart versions show as 5.60.7
> and 6.6.4.2867 in the About tab. This is downloaded as slac050aq.zip.
> I believe there are later versions but this definitely includes an
> option for the MSP430FR5728. This option opens differently than older
> versions, where you got one huge list to the side, now there are
> individual liosts for each family, with the FR versions are shown as
> the fourth from top choice. I don't have anything with a 5728 on it
> but it will link to the old FR57xx EVK
>
> Al
>
> On 18/02/2015 7:03 PM, 'Peter Grey' m...@ozemail.com.au
> [msp430] wrote:
>
> I have not worked with this chip before. I am using assembler and
> IAR Version 6.52. I have a USB-FET and a target board. In the past
> I have programmed the FR5728 without any problems. It does not
> recognise the device. I select this device in the options tab. I
> also select the MSP430F5XX heading as there is none for the
> FR57XX. There is only the FR59XX but this is for C only.
>
> Has anyone experienced this before?
>
> Peter
Al
On 19/02/2015 12:17 PM, 'Peter Grey' m...@ozemail.com.au [msp430] wrote:
> Thanks Al. Another difficulty I have is that I cannot get a license
> number from IAR. It says that the license I have is an older version.
> (I have removed all other versions from my system using “add/remove
> programs”). It then comes up with a window asking about renewal and I
> click on it but it says there is nothing for me. I presume this is
> because I did not pay for it?? I am trying another board this morning
> and I will see what happens.
>
> Peter
>
> *From:*m... [mailto:m...]
> *Sent:* Wednesday, 18 February 2015 7:27 PM
> *To:* m...
> *Subject:* Re: [msp430] Problem loading my program into a MSP430FR5729
>
> Peter, I am running assembler and Kickstart versions show as 5.60.7
> and 6.6.4.2867 in the About tab. This is downloaded as slac050aq.zip.
> I believe there are later versions but this definitely includes an
> option for the MSP430FR5728. This option opens differently than older
> versions, where you got one huge list to the side, now there are
> individual liosts for each family, with the FR versions are shown as
> the fourth from top choice. I don't have anything with a 5728 on it
> but it will link to the old FR57xx EVK
>
> Al
>
> On 18/02/2015 7:03 PM, 'Peter Grey' m...@ozemail.com.au
> [msp430] wrote:
>
> I have not worked with this chip before. I am using assembler and
> IAR Version 6.52. I have a USB-FET and a target board. In the past
> I have programmed the FR5728 without any problems. It does not
> recognise the device. I select this device in the options tab. I
> also select the MSP430F5XX heading as there is none for the
> FR57XX. There is only the FR59XX but this is for C only.
>
> Has anyone experienced this before?
>
> Peter
