16 bit CRC code for PIC

Started by taipei6969 November 26, 2003
I need to communicate with a device over RS232 and check/generate a
16-bit CRC. Can somebody give me the code to compute 16-bit CRC on
an array of bytes in BASIC or C? The CRC type is called "CRC16
V41". I know there is a standard polynomial used for CRC16 but what
does the "V41" part mean? Thanks for any help.



its a ccitt standard v4.1. google for "crc v4.1". there is some
source code out there.

--- In , "taipei6969" <taipei6969@y...> wrote:
> I need to communicate with a device over RS232 and check/generate a
> 16-bit CRC. Can somebody give me the code to compute 16-bit CRC on
> an array of bytes in BASIC or C? The CRC type is called "CRC16
> V41". I know there is a standard polynomial used for CRC16 but
what
> does the "V41" part mean? Thanks for any help.




Hi
 
Never seen a V41 but all crc checking results in the same value as we use them across the spectrum for many types of plc's and this is all we use
 
/******************************************************************************
*  Make CRC 16 Look-up Table.                                            *
******************************************************************************/
 
const unsigned int far crc_table[0x100] =
{
 0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50A5, 0x60C6, 0x70E7,
 0x8108, 0x9129, 0xA14A, 0xB16B, 0xC18C, 0xD1AD, 0xE1CE, 0xF1EF,
 0x1231, 0x0210, 0x3273, 0x2252, 0x52B5, 0x4294, 0x72F7, 0x62D6,
 0x9339, 0x8318, 0xB37B, 0xA35A, 0xD3BD, 0xC39C, 0xF3FF, 0xE3DE,
 0x2462, 0x3443, 0x0420, 0x1401, 0x64E6, 0x74C7, 0x44A4, 0x5485,
 0xA56A, 0xB54B, 0x8528, 0x9509, 0xE5EE, 0xF5CF, 0xC5AC, 0xD58D,
 0x3653, 0x2672, 0x1611, 0x0630, 0x76D7, 0x66F6, 0x5695, 0x46B4,
 0xB75B, 0xA77A, 0x9719, 0x8738, 0xF7DF, 0xE7FE, 0xD79D, 0xC7BC,
 0x48C4, 0x58E5, 0x6886, 0x78A7, 0x0840, 0x1861, 0x2802, 0x3823,
 0xC9CC, 0xD9ED, 0xE98E, 0xF9AF, 0x8948, 0x9969, 0xA90A, 0xB92B,
 0x5AF5, 0x4AD4, 0x7AB7, 0x6A96, 0x1A71, 0x0A50, 0x3A33, 0x2A12,
 0xDBFD, 0xCBDC, 0xFBBF, 0xEB9E, 0x9B79, 0x8B58, 0xBB3B, 0xAB1A,
 0x6CA6, 0x7C87, 0x4CE4, 0x5CC5, 0x2C22, 0x3C03, 0x0C60, 0x1C41,
 0xEDAE, 0xFD8F, 0xCDEC, 0xDDCD, 0xAD2A, 0xBD0B, 0x8D68, 0x9D49,
 0x7E97, 0x6EB6, 0x5ED5, 0x4EF4, 0x3E13, 0x2E32, 0x1E51, 0x0E70,
 0xFF9F, 0xEFBE, 0xDFDD, 0xCFFC, 0xBF1B, 0xAF3A, 0x9F59, 0x8F78,
 0x9188, 0x81A9, 0xB1CA, 0xA1EB, 0xD10C, 0xC12D, 0xF14E, 0xE16F,
 0x1080, 0x00A1, 0x30C2, 0x20E3, 0x5004, 0x4025, 0x7046, 0x6067,
 0x83B9, 0x9398, 0xA3FB, 0xB3DA, 0xC33D, 0xD31C, 0xE37F, 0xF35E,
 0x02B1, 0x1290, 0x22F3, 0x32D2, 0x4235, 0x5214, 0x6277, 0x7256,
 0xB5EA, 0xA5CB, 0x95A8, 0x8589, 0xF56E, 0xE54F, 0xD52C, 0xC50D,
 0x34E2, 0x24C3, 0x14A0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
 0xA7DB, 0xB7FA, 0x8799, 0x97B8, 0xE75F, 0xF77E, 0xC71D, 0xD73C,
 0x26D3, 0x36F2, 0x0691, 0x16B0, 0x6657, 0x7676, 0x4615, 0x5634,
 0xD94C, 0xC96D, 0xF90E, 0xE92F, 0x99C8, 0x89E9, 0xB98A, 0xA9AB,
 0x5844, 0x4865, 0x7806, 0x6827, 0x18C0, 0x08E1, 0x3882, 0x28A3,
 0xCB7D, 0xDB5C, 0xEB3F, 0xFB1E, 0x8BF9, 0x9BD8, 0xABBB, 0xBB9A,
 0x4A75, 0x5A54, 0x6A37, 0x7A16, 0x0AF1, 0x1AD0, 0x2AB3, 0x3A92,
 0xFD2E, 0xED0F, 0xDD6C, 0xCD4D, 0xBDAA, 0xAD8B, 0x9DE8, 0x8DC9,
 0x7C26, 0x6C07, 0x5C64, 0x4C45, 0x3CA2, 0x2C83, 0x1CE0, 0x0CC1,
 0xEF1F, 0xFF3E, 0xCF5D, 0xDF7C, 0xAF9B, 0xBFBA, 0x8FD9, 0x9FF8,
 0x6E17, 0x7E36, 0x4E55, 0x5E74, 0x2E93, 0x3EB2, 0x0ED1, 0x1EF0
};
 
/******************************************************************************
*  Make CRC 16 Calculation Function.                                     *
******************************************************************************/
 
unsigned int Make_Crc (unsigned char __far *data, unsigned int __far len)
{
   unsigned int accum;
 
   /* Pre-conditioning */
   accum = 0xFFFF;
  
   hitdog();  // clock DS1763 Watch dog  //hit the watchdog
 
   while (len--)
   {  accum = ((accum & 0x00FF) << 8) ^
                  crc_table[( (accum >> 8) ^ *data ++ ) & 0x00FF];
   }
 
   hitdog();  // clock DS1763 Watch dog  //hit the watchdog
 
   return(accum);
}
 
regards
Martin
----- Original Message -----
From: taipei6969
To: p...@yahoogroups.com
Sent: Wednesday, November 26, 2003 6:43 PM
Subject: [piclist] 16 bit CRC code for PIC

I need to communicate with a device over RS232 and check/generate a
16-bit CRC.  Can somebody give me the code to compute 16-bit CRC on
an array of bytes in BASIC or C?  The CRC type is called "CRC16
V41".  I know there is a standard polynomial used for CRC16 but what
does the "V41" part mean?  Thanks for any help.


to unsubscribe, go to http://www.yahoogroups.com and follow the instructions

">Yahoo! Terms of Service.