Upload program over ethernet

Hello,
I have see that there is a program from SHDesigns for upload program
over ethernet for rabbit RCM3700.
I download the demo program, but need upload the st-demo.bin with
Flashit program. I try upload st-demo.bin with Rabbit Field Utility and
do not work. Is there a link for download a demo or trial version of
for upload the program Flashit (or another) and then test the
uploader ?.

Sorry for my english ! Start a New Thread

Omar wrote:
> Hello,
> I have see that there is a program from SHDesigns for upload program
> over ethernet for rabbit RCM3700.
> I download the demo program, but need upload the st-demo.bin with
> Flashit program. I try upload st-demo.bin with Rabbit Field Utility and
> do not work. Is there a link for download a demo or trial version of
> for upload the program Flashit (or another) and then test the
> uploader ?.
>

The DC version of the DLM is available here:
http://shdesigns.org/files/DLMDemo.zip It should accept either a DC or
Softools program .bin file.
--
------
| Scott G. Henion| s...@shdesigns.org |
| Consultant | Stone Mountain, GA |
| SHDesigns http://www.shdesigns.org |
------
Rabbit libs: http://www.shdesigns.org/rabbit/
today's fortune
Archeologists unearthed an old english dictionary dating back to the year 1236. It defined "victim" as "one who has encountered Chuck Norris" Start a New Thread

Omar wrote:
> Thank you Scott. I have put the DMLdemo into RCM3700 and run the
> program: I have link and IP echo to Ping. OK
>
> But I can not compile my program to .bin file.
> When I try compile with Compile -> compite to .bin File -> Compile to
> flash i get some compiller errors:
>
> line 294 : WARNING PKTDRV.LIB : Board type does not support TCP/IP,
> assuming TCP/IP Development Kit setup.
> line 808 : ERROR SA712WMB1CR.C : Invalid expression - need lvalue.
> line 808 : ERROR SA712WMB1CR.C : PBDDRShadow is out of scope/ not
> declared.
> line 808 : ERROR SA712WMB1CR.C : Invalid expression - need lvalue.
> line 808 : ERROR SA712WMB1CR.C : PBDDRShadow is out of scope/ not
> declared.
>
> I have DC 9.21 connected to a RCM 3700. I use RabbitWeb too.
>
> Do I need change into Compiller options ?
>
You need to set the board type in the "targetless" tab in the compiler
options.

--
------
| Scott G. Henion| s...@shdesigns.org |
| Consultant | Stone Mountain, GA |
| SHDesigns http://www.shdesigns.org |
------
Rabbit libs: http://www.shdesigns.org/rabbit/
today's fortune
You know you're using the computer too much when:
you learned to recognize that you got a new IM from the glow your screen makes
on your walls.
-- Chaosite Start a New Thread

Yes, Scott. Its run very whell.
But I have a new problem (i thing the last one).
After download my user program with UDPDownload.exe my user program
run very whell, but I can not return to "program mode" because the
board is not found for the search.
I reset the board but allways return to muy program.
Is this for the demo version or i need put a call into a zhtml page to
go to DML program ?

i use this files to download
RAM Loader : PDL-Generic.bin
USER Program : myuserprogram.bin

Thank you !

--- In r..., Scott Henion wrote:
>
> Omar wrote:
> > Thank you Scott. I have put the DMLdemo into RCM3700 and run the
> > program: I have link and IP echo to Ping. OK
> >
> > But I can not compile my program to .bin file.
> > When I try compile with Compile -> compite to .bin File -> Compile to
> > flash i get some compiller errors:
> >
> > line 294 : WARNING PKTDRV.LIB : Board type does not support TCP/IP,
> > assuming TCP/IP Development Kit setup.
> > line 808 : ERROR SA712WMB1CR.C : Invalid expression - need
lvalue.
> > line 808 : ERROR SA712WMB1CR.C : PBDDRShadow is out of scope/ not
> > declared.
> > line 808 : ERROR SA712WMB1CR.C : Invalid expression - need
lvalue.
> > line 808 : ERROR SA712WMB1CR.C : PBDDRShadow is out of scope/ not
> > declared.
> >
> > I have DC 9.21 connected to a RCM 3700. I use RabbitWeb too.
> >
> > Do I need change into Compiller options ?
> >
> You need to set the board type in the "targetless" tab in the compiler
> options.
>
> --
> ------
> | Scott G. Henion| shenion@... |
> | Consultant | Stone Mountain, GA |
> | SHDesigns http://www.shdesigns.org |
> ------
> Rabbit libs: http://www.shdesigns.org/rabbit/
> today's fortune
> You know you're using the computer too much when:
> you learned to recognize that you got a new IM from the glow your
screen makes
> on your walls.
> -- Chaosite
> Start a New Thread

Omar wrote:
> Yes, Scott. Its run very whell.
> But I have a new problem (i thing the last one).
> After download my user program with UDPDownload.exe my user program
> run very whell, but I can not return to "program mode" because the
> board is not found for the search.
> I reset the board but allways return to muy program.
> Is this for the demo version or i need put a call into a zhtml page to
> go to DML program ?
>
> i use this files to download
> RAM Loader : PDL-Generic.bin
> USER Program : myuserprogram.bin
>

Your program will need to include the DLM library to allow future updates.
--
------
| Scott G. Henion| s...@shdesigns.org |
| Consultant | Stone Mountain, GA |
| SHDesigns http://www.shdesigns.org |
------
Rabbit libs: http://www.shdesigns.org/rabbit/
today's fortune
BOFH Excuse #186:

permission denied Start a New Thread

OK, Scott.
Which software I should be purchase ?

ETH-2000-DC, or RESIDENT DLM, or both ?

I'm use Dynamic C 9,21 + RabbitWeb

Thank you very much for your responses.

Omar
--- In r..., Scott Henion wrote:
>
> Omar wrote:
> > Yes, Scott. Its run very whell.
> > But I have a new problem (i thing the last one).
> > After download my user program with UDPDownload.exe my user program
> > run very whell, but I can not return to "program mode" because the
> > board is not found for the search.
> > I reset the board but allways return to muy program.
> > Is this for the demo version or i need put a call into a zhtml page to
> > go to DML program ?
> >
> > i use this files to download
> > RAM Loader : PDL-Generic.bin
> > USER Program : myuserprogram.bin
> >
>
> Your program will need to include the DLM library to allow future
updates.
> --
> ------
> | Scott G. Henion| shenion@... |
> | Consultant | Stone Mountain, GA |
> | SHDesigns http://www.shdesigns.org |
> ------
> Rabbit libs: http://www.shdesigns.org/rabbit/
> today's fortune
> BOFH Excuse #186:
>
> permission denied
> Start a New Thread

Omar wrote:
> OK, Scott.
> Which software I should be purchase ?
>
> ETH-2000-DC, or RESIDENT DLM, or both ?
>
> I'm use Dynamic C 9,21 + RabbitWeb
>
> Thank you very much for your responses.
>

The ETH-2000-DC DLM is the same as used in the demo
--
------
| Scott G. Henion| s...@shdesigns.org |
| Consultant | Stone Mountain, GA |
| SHDesigns http://www.shdesigns.org |
------
Rabbit libs: http://www.shdesigns.org/rabbit/
today's fortune
Football builds self-discipline. What else would induce a spectator to
sit out in the open in subfreezing weather? Start a New Thread

Thank you Scott. I have put the DMLdemo into RCM3700 and run the
program: I have link and IP echo to Ping. OK

But I can not compile my program to .bin file.
When I try compile with Compile -> compite to .bin File -> Compile to
flash i get some compiller errors:

line 294 : WARNING PKTDRV.LIB : Board type does not support TCP/IP,
assuming TCP/IP Development Kit setup.
line 808 : ERROR SA712WMB1CR.C : Invalid expression - need lvalue.
line 808 : ERROR SA712WMB1CR.C : PBDDRShadow is out of scope/ not
declared.
line 808 : ERROR SA712WMB1CR.C : Invalid expression - need lvalue.
line 808 : ERROR SA712WMB1CR.C : PBDDRShadow is out of scope/ not
declared.

I have DC 9.21 connected to a RCM 3700. I use RabbitWeb too.

Do I need change into Compiller options ?

Thank you in advance

Omar

--- In r..., Scott Henion wrote:
>
> Omar wrote:
> > Hello,
> > I have see that there is a program from SHDesigns for upload program
> > over ethernet for rabbit RCM3700.
> > I download the demo program, but need upload the st-demo.bin with
> > Flashit program. I try upload st-demo.bin with Rabbit Field
Utility and
> > do not work. Is there a link for download a demo or trial version of
> > for upload the program Flashit (or another) and then test the
> > uploader ?.
> >
>
> The DC version of the DLM is available here:
> http://shdesigns.org/files/DLMDemo.zip It should accept either a DC or
> Softools program .bin file.
> --
> ------
> | Scott G. Henion| shenion@... |
> | Consultant | Stone Mountain, GA |
> | SHDesigns http://www.shdesigns.org |
> ------
> Rabbit libs: http://www.shdesigns.org/rabbit/
> today's fortune
> Archeologists unearthed an old english dictionary dating back to the
year 1236. It defined "victim" as "one who has encountered Chuck Norris"
> Start a New Thread

Thank you Scott.
For last, i need know if the RESIDENT DML is a more complete version
than ETH-2000 DC or it is for another applicatiion.
I can not understand this looking the web.
(Sorry for this e-mail, but I have send an e-mail to shdesigns but i
have nor recieve answer).

Thank you !
--- In r..., Scott Henion wrote:
>
> Omar wrote:
> > OK, Scott.
> > Which software I should be purchase ?
> >
> > ETH-2000-DC, or RESIDENT DLM, or both ?
> >
> > I'm use Dynamic C 9,21 + RabbitWeb
> >
> > Thank you very much for your responses.
> >
>
> The ETH-2000-DC DLM is the same as used in the demo
> --
> ------
> | Scott G. Henion| shenion@... |
> | Consultant | Stone Mountain, GA |
> | SHDesigns http://www.shdesigns.org |
> ------
> Rabbit libs: http://www.shdesigns.org/rabbit/
> today's fortune
> Football builds self-discipline. What else would induce a spectator to
> sit out in the open in subfreezing weather?
> Start a New Thread