RCM3700 Programming Connector...
Started by ●December 10, 2015
I program hundreds of the RCM3700 boards every year using the Rabbit Cloning
Board. The cables on this board are very fragile, so over time, the plugging and
unplugging on every board to program it causes the cable go bad due to broken
wires next to the connector. Rabbit does not make these cables available, they
require you to purchase a new cloning board which costs $89. Can someone provide
me with part numbers and a source for purchasing the connectors and cable so I
can make my own or if you have a supplier that already makes cables of this type
that would be great too.
Reply by ●December 10, 20152015-12-10
Try Molex. I think it is the TCSD line.
-Pete F
From: r... [mailto:r...]
Sent: Thursday, December 10, 2015 4:15 PM
To: r...
Subject: [rabbit-semi] RCM3700 Programming Connector...
I program hundreds of the RCM3700 boards every year using the Rabbit Cloning Board. The cables on this board are very fragile, so over time, the plugging and unplugging on every board to program it causes the cable go bad due to broken wires next to the connector. Rabbit does not make these cables available, they require you to purchase a new cloning board which costs $89. Can someone provide me with part numbers and a source for purchasing the connectors and cable so I can make my own or if you have a supplier that already makes cables of this type that would be great too.
-Pete F
From: r... [mailto:r...]
Sent: Thursday, December 10, 2015 4:15 PM
To: r...
Subject: [rabbit-semi] RCM3700 Programming Connector...
I program hundreds of the RCM3700 boards every year using the Rabbit Cloning Board. The cables on this board are very fragile, so over time, the plugging and unplugging on every board to program it causes the cable go bad due to broken wires next to the connector. Rabbit does not make these cables available, they require you to purchase a new cloning board which costs $89. Can someone provide me with part numbers and a source for purchasing the connectors and cable so I can make my own or if you have a supplier that already makes cables of this type that would be great too.
