Hi all, I'm trying to build uClinux from uClinux-20110210-ea2468_v091, on xubuntu 12.04. Doing... # make...

Hi all, I'm trying to build uClinux from uClinux-20110210-ea2468_v091, on xubuntu 12.04. Doing... # make CROSS_COMPILE=arm-unknown-linux-uclibc- xconfig # make CROSS_COMPILE=arm-unknown-linux-uclibc- eventually fails with... make[2]: Entering directory `/home/david/project/lpc2468/uClinux/include' Making symlinks in /home/david/project/lpc2468/uClinux/staging/include Making inc...

HI. I wanted the USB port on lpc2478 chip through software Delphi 7.0 with a connection to data exchange can create. But I do not have enough...

HI. I wanted the USB port on lpc2478 chip through software Delphi 7.0 with a connection to data exchange can create. But I do not have enough information to do it. Please help. Thanks ------------------------------------

hi i need an isp circuit for lpc2368 with minimum required components in it..... please help... ------------------------------------

hi i need an isp circuit for lpc2368 with minimum required components in it..... please help... ------------------------------------

Hi, Is there a way to restart a task in freeRTOS? -- With Regards, Nishant Agrawal ------------------------------------

Hi, Is there a way to restart a task in freeRTOS? -- With Regards, Nishant Agrawal ------------------------------------

Hello Everybody, I am trying to interface a device with RS485 half duplex communication. So = below is my algorithm. 1) Set the Master Device...

Hello Everybody, I am trying to interface a device with RS485 half duplex communication. So = below is my algorithm. 1) Set the Master Device (DIR) into transmitting mode. 2) Send the data over the UART. 3) Set the Master Device (DIR) into receiving mode. To receive data from th= e device.=A0 So when the final bit is shifted out into the UART line set the Master devi= ce into receiving...

Is there a port of LwIP for LPC23xx, possibly using freeRTOS? I can't seem to find any port for LPC23xx series. -- With Regards, Nishant...

Is there a port of LwIP for LPC23xx, possibly using freeRTOS? I can't seem to find any port for LPC23xx series. -- With Regards, Nishant Agrawal ------------------------------------

first i load program into blueboard.then i connect my sd card to PC via card reader. then right click on the removable disk then properties show...

first i load program into blueboard.then i connect my sd card to PC via card reader. then right click on the removable disk then properties show used space 0 bytes . from this i test my sd card. Is it right for checking data into sd card? give your reply. i also attach my code. On Tue, Jul 6, 2010 at 9:37 PM, Donald H wrote: > --- In l...@yahoogroups.com

I am using LPC 2148 i am completely new to this. My problem is that how should i calculate the Prescaler Register value for 48mS delay using...

I am using LPC 2148 i am completely new to this. My problem is that how should i calculate the Prescaler Register value for 48mS delay using timer. I am running LPC2148 @ 12MHz. I want the equation for Prescaler calculation Thanking in Anticipation. Ravi. ------------------------------------

Hi I'm using uvision and I'm trying to find an accurate delay routine to be used for microsecond delays. I found the following file in the...

Hi I'm using uvision and I'm trying to find an accurate delay routine to be used for microsecond delays. I found the following file in the forum file area http://f1.grp.yahoofs.com/v1/cFHQTwKGMwfhFULEHzRNBD2QyQNeF258SofnvrkUx8xyLwhR6naRC3y-hmNhng5R4ma o10M40At4JVCPL8A_KnfahRaUevi5/delay.zip The core function in that file is the following four clock delay routine [code] static __inl

Hi, Does anybody use TNKernel (http://www.tnkernel.com/) in combination with the TCP/IP stack? It is working on my LPC2378, but I have some...

Hi, Does anybody use TNKernel (http://www.tnkernel.com/) in combination with the TCP/IP stack? It is working on my LPC2378, but I have some questions regarding the datails.... Nils ------------------------------------