PEMICRO PROG12Z installer needed.

Hi, All!

Anybody have Pemicro PROG12z installer (working link or file)
with version higher than 1.64?

Regards.
Serge. Start a New Thread

I'm using 1.66. Couldn't you get it to work on your system? I'm
running with the old parallel port BDM pod, but it works okay for me.

jmk
-----------
James M. Knox
TriSoft ph 512-385-0316
1300 Koenig Lane West fax 512-371-5716
Suite 200
Austin, Tx 78756 j...@trisoft.com
----------- Start a New Thread

--- In 6..., "James M. Knox" wrote:

> I'm using 1.66. Couldn't you get it to work on your system? I'm
> running with the old parallel port BDM pod, but it works okay for me.

Hi, James!
I change my USB-ML12 adapter for new one but with other hardware, so
1.64 don't work with it...:-( Maybe newest version will help me.
Can you send it to me?

Regards.
Serge Start a New Thread

To All

If Serge had a license for this software, he should go back to P&E for
an upgrade and should not be asking people to provide him with a pirated
copy.

Dave Start a New Thread

At 11:00 5/7/2006 -0400, you wrote:
>To All
>
>If Serge had a license for this software, he should go back to P&E for
>an upgrade and should not be asking people to provide him with a pirated
>copy.
>

Which is why I phrased my response as I did. It was not clear if he
was asking for the new version, or had it and couldn't get it to
work. ["...changed my adapter for new one, but with other hardware"
wasn't at all clear to me.] Note that I did NOT offer to send him
bootlegged software that he should be able to legally get from P&E. <G>

jmk
-----------
James M. Knox
TriSoft ph 512-385-0316
1300 Koenig Lane West fax 512-371-5716
Suite 200
Austin, Tx 78756 j...@trisoft.com
----------- Start a New Thread

> Which is why I phrased my response as I did. It was not clear if he
> was asking for the new version, or had it and couldn't get it to
> work. ["...changed my adapter for new one, but with other hardware"
> wasn't at all clear to me.] Note that I did NOT offer to send him
> bootlegged software that he should be able to legally get from P&E.

Thanks

We appreciate your honesty.

Dave Start a New Thread

--- In 6..., Dave Perreault wrote:
> To All
> If Serge had a license for this software, he should go back to P&E for
> an upgrade and should not be asking people to provide him with a
pirated copy.

Dear Dave!

I'm not a pirate but only victim of P&E fault. There was long story...
In 2003 year I bought USB MON08 Multilink adapter (via my friend)
but P&E faulty put in package from MON08 another USB-ML12 adapter
which costs the same money but in that time it not be able for
ordering on P&E site so I can't order it...I ask again my friend
to buy another MON08 adapter for me... I try to make a request P&E
send me PROG12Z software that I buy because sales dept. fault. Soon
after customer support sent me software poster with link to it and
after aprrox. 10 month sent me another release... Recently I change
(happy occassion) my old USB-ML12 (REV.A) with a new one (REV.B PCB
layout) but PROG12Z v1.64 don't see it... So I want to upgrade
PROG12Z software but I don't want to desturb P&E customer support
with my old claim. I think you understand me...

Sorry for my bad english. By the way I live in Ukraine and this is
about 12.000 km from USA...

Regards.
Serge. Start a New Thread

Serge

Send me information on where, when, and by whom it was purchased and
I'll see that P&E sends out an upgrade.

Dave Start a New Thread

--- In 6..., "Dr. David A. Perreault" wrote

> Send me information on where, when, and by whom it was purchased and
> I'll see that P&E sends out an upgrade.

Hi, Dr. David!

Sorry, you don't understood me. Miladin Lakov in USA bought for me
(approx. in august 2003) USB MON08 adapter but P&E mistakenly
put in MON08 package USB-ML12 adapter. P&E admit own mistake
and sent me PROG12Z as a gift.
I found in my e-mail archives one of the sw poster for me:
http://www.pemicro.com/PESoftwarePoster/28_3_5901301454508680

Serge. Start a New Thread