Hi
I am working on a project for school and I am having trouble getting the SCI0
interrupt to work on my mini-dragon board from wytec (evbplus.com). I have
verified my code works in TExaS with the interrupt, but I am unable to get it to
work on the AsmIDE terminal window.
I can have the MCU send ASCII characters to the terminal, but I am unable to use
keyboard entries to generate the interrupt.
I am using a USB to RS232 adapter, AsmIDE program D-bug12 V4.
I can load the program into RAM or EEPROM and the I/O on the ports are working
correctly, but I am stuck on how to test/verify the interrupt.
Any help would be great.
Thanks in advance.
Justin
9S12DG256 SCI0 not working with AsmIDE D-Dug12 V4
Started by ●April 23, 2009
Reply by ●April 24, 20092009-04-24
--- In 6..., jlucas134@... wrote:
>
> Hi
> I am working on a project for school and I am having trouble getting the SCI0 interrupt to work on my mini-dragon board from wytec (evbplus.com). I have verified my code works in TExaS with the interrupt, but I am unable to get it to work on the AsmIDE terminal window.
>
> I can have the MCU send ASCII characters to the terminal, but I am unable to use keyboard entries to generate the interrupt.
>
> I am using a USB to RS232 adapter, AsmIDE program D-bug12 V4.
> I can load the program into RAM or EEPROM and the I/O on the ports are working correctly, but I am stuck on how to test/verify the interrupt.
> Any help would be great.
>
> Thanks in advance.
>
> Justin
>
>
> Hi
> I am working on a project for school and I am having trouble getting the SCI0 interrupt to work on my mini-dragon board from wytec (evbplus.com). I have verified my code works in TExaS with the interrupt, but I am unable to get it to work on the AsmIDE terminal window.
>
> I can have the MCU send ASCII characters to the terminal, but I am unable to use keyboard entries to generate the interrupt.
>
> I am using a USB to RS232 adapter, AsmIDE program D-bug12 V4.
> I can load the program into RAM or EEPROM and the I/O on the ports are working correctly, but I am stuck on how to test/verify the interrupt.
> Any help would be great.
>
> Thanks in advance.
>
> Justin
>
Reply by ●June 30, 20092009-06-30
If you are running your program in debug then one of the serial ports
are taken up by debug12. Are you using the one not used by dbug12 ?
--- In 6..., jlucas134@... wrote:
>
> Hi
> I am working on a project for school and I am having trouble getting the SCI0 interrupt to work on my mini-dragon board from wytec (evbplus.com). I have verified my code works in TExaS with the interrupt, but I am unable to get it to work on the AsmIDE terminal window.
>
> I can have the MCU send ASCII characters to the terminal, but I am unable to use keyboard entries to generate the interrupt.
>
> I am using a USB to RS232 adapter, AsmIDE program D-bug12 V4.
> I can load the program into RAM or EEPROM and the I/O on the ports are working correctly, but I am stuck on how to test/verify the interrupt.
> Any help would be great.
>
> Thanks in advance.
>
> Justin
>
are taken up by debug12. Are you using the one not used by dbug12 ?
--- In 6..., jlucas134@... wrote:
>
> Hi
> I am working on a project for school and I am having trouble getting the SCI0 interrupt to work on my mini-dragon board from wytec (evbplus.com). I have verified my code works in TExaS with the interrupt, but I am unable to get it to work on the AsmIDE terminal window.
>
> I can have the MCU send ASCII characters to the terminal, but I am unable to use keyboard entries to generate the interrupt.
>
> I am using a USB to RS232 adapter, AsmIDE program D-bug12 V4.
> I can load the program into RAM or EEPROM and the I/O on the ports are working correctly, but I am stuck on how to test/verify the interrupt.
> Any help would be great.
>
> Thanks in advance.
>
> Justin
>
