Hi all,
I want to buy PK2200, Where to buy it? for learning.
Regards
Heru S
Where to by pk-2200
Started by ●December 16, 2010
Reply by ●December 16, 20102010-12-16
Hi Heru,
The PK2200 is not longer supplied to customers as a new product. You might
find someone with stock if you are lucky but I suggest you actually consider
purchasing one of the current designs instead. No point learning how to use
something that you are not going to be able to use unless this is for a one
off hobby project? You are also not likely to get much support as this is
quite an old product.
If I was you I would consider the OP6700 as this seems to offer similar
features and as this is still a current product, you will get support.
You can find out where to purchase this from the Rabbit website. It all
depends on which country you live in?
Dave...
---
Very funny Scotty, now beam down my clothes!!!
---
From: r... [mailto:r...] On
Behalf Of Heru Setiawan
Sent: 17 December 2010 01:18
To: r...
Subject: [rabbit-semi] Where to by pk-2200
Hi all,
I want to buy PK2200, Where to buy it? for learning.
Regards
Heru S
The PK2200 is not longer supplied to customers as a new product. You might
find someone with stock if you are lucky but I suggest you actually consider
purchasing one of the current designs instead. No point learning how to use
something that you are not going to be able to use unless this is for a one
off hobby project? You are also not likely to get much support as this is
quite an old product.
If I was you I would consider the OP6700 as this seems to offer similar
features and as this is still a current product, you will get support.
You can find out where to purchase this from the Rabbit website. It all
depends on which country you live in?
Dave...
---
Very funny Scotty, now beam down my clothes!!!
---
From: r... [mailto:r...] On
Behalf Of Heru Setiawan
Sent: 17 December 2010 01:18
To: r...
Subject: [rabbit-semi] Where to by pk-2200
Hi all,
I want to buy PK2200, Where to buy it? for learning.
Regards
Heru S
Reply by ●December 18, 20102010-12-18
thanks,
but we still need pk2200 to support our wave machine, that problem is no
output data. so we must change it with the same model.
Regards
On Fri, Dec 17, 2010 at 10:29 AM, Dave McLaughlin <
d...@nerdshack.com> wrote:
> Hi Heru,
>
> The PK2200 is not longer supplied to customers as a new product. You might
> find someone with stock if you are lucky but I suggest you actually consider
> purchasing one of the current designs instead. No point learning how to use
> something that you are not going to be able to use unless this is for a one
> off hobby project? You are also not likely to get much support as this is
> quite an old product.
>
> If I was you I would consider the OP6700 as this seems to offer similar
> features and as this is still a current product, you will get support.
>
> You can find out where to purchase this from the Rabbit website. It all
> depends on which country you live in?
>
> Dave...
>
> ---
> Very funny Scotty, now beam down my clothes!!!
> ---
>
> *From:* r... [mailto:r...] *On
> Behalf Of *Heru Setiawan
> *Sent:* 17 December 2010 01:18
> *To:* r...
> *Subject:* [rabbit-semi] Where to by pk-2200
>
> Hi all,
>
> I want to buy PK2200, Where to buy it? for learning.
>
> Regards
> Heru S
>
>
but we still need pk2200 to support our wave machine, that problem is no
output data. so we must change it with the same model.
Regards
On Fri, Dec 17, 2010 at 10:29 AM, Dave McLaughlin <
d...@nerdshack.com> wrote:
> Hi Heru,
>
> The PK2200 is not longer supplied to customers as a new product. You might
> find someone with stock if you are lucky but I suggest you actually consider
> purchasing one of the current designs instead. No point learning how to use
> something that you are not going to be able to use unless this is for a one
> off hobby project? You are also not likely to get much support as this is
> quite an old product.
>
> If I was you I would consider the OP6700 as this seems to offer similar
> features and as this is still a current product, you will get support.
>
> You can find out where to purchase this from the Rabbit website. It all
> depends on which country you live in?
>
> Dave...
>
> ---
> Very funny Scotty, now beam down my clothes!!!
> ---
>
> *From:* r... [mailto:r...] *On
> Behalf Of *Heru Setiawan
> *Sent:* 17 December 2010 01:18
> *To:* r...
> *Subject:* [rabbit-semi] Where to by pk-2200
>
> Hi all,
>
> I want to buy PK2200, Where to buy it? for learning.
>
> Regards
> Heru S
>
>
Reply by ●December 19, 20102010-12-19
Hi Heru,
OK. I understand it is a legacy product.
The Rabbit web says that they do still sell some legacy products but only to
customers who require them for older products.
I suggest you check the website and find your nearest dealer and contact
them to see if they have stock of this board or if they can get from Rabbit.
I am guessing from your name you may be in Indonesia? If you are, you may be
interested in getting in contact with myself if you are unable to source the
PK2200 and I would be able to help design something that would be
compatible.
Regards
Dave...
---
Very funny Scotty, now beam down my clothes!!!
---
http://www.axoninstruments.biz
---
From: r... [mailto:r...] On
Behalf Of Heru Setiawan
Sent: 18 December 2010 21:59
To: r...
Subject: Re: [rabbit-semi] Where to by pk-2200
thanks,
but we still need pk2200 to support our wave machine, that problem is no
output data. so we must change it with the same model.
Regards
OK. I understand it is a legacy product.
The Rabbit web says that they do still sell some legacy products but only to
customers who require them for older products.
I suggest you check the website and find your nearest dealer and contact
them to see if they have stock of this board or if they can get from Rabbit.
I am guessing from your name you may be in Indonesia? If you are, you may be
interested in getting in contact with myself if you are unable to source the
PK2200 and I would be able to help design something that would be
compatible.
Regards
Dave...
---
Very funny Scotty, now beam down my clothes!!!
---
http://www.axoninstruments.biz
---
From: r... [mailto:r...] On
Behalf Of Heru Setiawan
Sent: 18 December 2010 21:59
To: r...
Subject: Re: [rabbit-semi] Where to by pk-2200
thanks,
but we still need pk2200 to support our wave machine, that problem is no
output data. so we must change it with the same model.
Regards
Reply by ●December 21, 20102010-12-21
Hi Mr. Dave
it is difficult for me to get pk2200, can you supply it for me?
Regards
On Sun, Dec 19, 2010 at 12:23 PM, Dave McLaughlin <
d...@nerdshack.com> wrote:
> Hi Heru,
>
> OK. I understand it is a legacy product.
>
> The Rabbit web says that they do still sell some legacy products but only
> to customers who require them for older products.
>
> I suggest you check the website and find your nearest dealer and contact
> them to see if they have stock of this board or if they can get from Rabbit.
>
> I am guessing from your name you may be in Indonesia? If you are, you may
> be interested in getting in contact with myself if you are unable to source
> the PK2200 and I would be able to help design something that would be
> compatible.
>
> Regards
>
> Dave...
>
> ---
> Very funny Scotty, now beam down my clothes!!!
> ---
> http://www.axoninstrumentsbiz
> ---
>
> *From:* r... [mailto:r...] *On
> Behalf Of *Heru Setiawan
> *Sent:* 18 December 2010 21:59
>
> *To:* r...
> *Subject:* Re: [rabbit-semi] Where to by pk-2200
>
> thanks,
>
> but we still need pk2200 to support our wave machine, that problem is no
> output data. so we must change it with the same model.
>
> Regards
>
>
it is difficult for me to get pk2200, can you supply it for me?
Regards
On Sun, Dec 19, 2010 at 12:23 PM, Dave McLaughlin <
d...@nerdshack.com> wrote:
> Hi Heru,
>
> OK. I understand it is a legacy product.
>
> The Rabbit web says that they do still sell some legacy products but only
> to customers who require them for older products.
>
> I suggest you check the website and find your nearest dealer and contact
> them to see if they have stock of this board or if they can get from Rabbit.
>
> I am guessing from your name you may be in Indonesia? If you are, you may
> be interested in getting in contact with myself if you are unable to source
> the PK2200 and I would be able to help design something that would be
> compatible.
>
> Regards
>
> Dave...
>
> ---
> Very funny Scotty, now beam down my clothes!!!
> ---
> http://www.axoninstrumentsbiz
> ---
>
> *From:* r... [mailto:r...] *On
> Behalf Of *Heru Setiawan
> *Sent:* 18 December 2010 21:59
>
> *To:* r...
> *Subject:* Re: [rabbit-semi] Where to by pk-2200
>
> thanks,
>
> but we still need pk2200 to support our wave machine, that problem is no
> output data. so we must change it with the same model.
>
> Regards
>
>
Reply by ●December 21, 20102010-12-21
Dave...
---
Very funny Scotty, now beam down my clothes!!!
---
From: r... [mailto:r...] On
Behalf Of Heru Setiawan
Sent: 22 December 2010 07:53
To: r...
Subject: Re: [rabbit-semi] Where to by pk-2200
Hi Mr. Dave
it is difficult for me to get pk2200, can you supply it for me?
Regards
On Sun, Dec 19, 2010 at 12:23 PM, Dave McLaughlin
wrote:
Hi Heru,
OK. I understand it is a legacy product.
The Rabbit web says that they do still sell some legacy products but only to
customers who require them for older products.
I suggest you check the website and find your nearest dealer and contact
them to see if they have stock of this board or if they can get from Rabbit.
I am guessing from your name you may be in Indonesia? If you are, you may be
interested in getting in contact with myself if you are unable to source the
PK2200 and I would be able to help design something that would be
compatible.
Regards
Dave...
---
Very funny Scotty, now beam down my clothes!!!
---
http://www.axoninstrumentsbiz
---
From: r... [mailto:r...] On
Behalf Of Heru Setiawan
Sent: 18 December 2010 21:59
To: r...
Subject: Re: [rabbit-semi] Where to by pk-2200
thanks,
but we still need pk2200 to support our wave machine, that problem is no
output data. so we must change it with the same model.
Regards
Reply to
y%20pk-2200> sender | Reply to
e%20to%20by%20pk-2200> group | Reply
3MzU5NzE0BGdycElkAzIzMDczMTYEZ3Jwc3BJZAMxNzA2NTU0MjA1BG1zZ0lkAzQwNjE0BHNlYwN
mdHIEc2xrA3JwbHkEc3RpbWUDMTI5Mjk3OTIyNA--?act=reply&messageNum@614> via
web post |
3MzU5NzE0BGdycElkAzIzMDczMTYEZ3Jwc3BJZAMxNzA2NTU0MjA1BHNlYwNmdHIEc2xrA250cGM
Ec3RpbWUDMTI5Mjk3OTIyNA--> Start a New Topic
Messages in this topic
JiBF9TAzk3MzU5NzE0BGdycElkAzIzMDczMTYEZ3Jwc3BJZAMxNzA2NTU0MjA1BG1zZ0lkAzQwNj
E0BHNlYwNmdHIEc2xrA3Z0cGMEc3RpbWUDMTI5Mjk3OTIyNAR0cGNJZAM0MDYwOA--> (5)
Recent Activity:
---
Very funny Scotty, now beam down my clothes!!!
---
From: r... [mailto:r...] On
Behalf Of Heru Setiawan
Sent: 22 December 2010 07:53
To: r...
Subject: Re: [rabbit-semi] Where to by pk-2200
Hi Mr. Dave
it is difficult for me to get pk2200, can you supply it for me?
Regards
On Sun, Dec 19, 2010 at 12:23 PM, Dave McLaughlin
wrote:
Hi Heru,
OK. I understand it is a legacy product.
The Rabbit web says that they do still sell some legacy products but only to
customers who require them for older products.
I suggest you check the website and find your nearest dealer and contact
them to see if they have stock of this board or if they can get from Rabbit.
I am guessing from your name you may be in Indonesia? If you are, you may be
interested in getting in contact with myself if you are unable to source the
PK2200 and I would be able to help design something that would be
compatible.
Regards
Dave...
---
Very funny Scotty, now beam down my clothes!!!
---
http://www.axoninstrumentsbiz
---
From: r... [mailto:r...] On
Behalf Of Heru Setiawan
Sent: 18 December 2010 21:59
To: r...
Subject: Re: [rabbit-semi] Where to by pk-2200
thanks,
but we still need pk2200 to support our wave machine, that problem is no
output data. so we must change it with the same model.
Regards
Reply to
y%20pk-2200> sender | Reply to
e%20to%20by%20pk-2200> group | Reply
3MzU5NzE0BGdycElkAzIzMDczMTYEZ3Jwc3BJZAMxNzA2NTU0MjA1BG1zZ0lkAzQwNjE0BHNlYwN
mdHIEc2xrA3JwbHkEc3RpbWUDMTI5Mjk3OTIyNA--?act=reply&messageNum@614> via
web post |
3MzU5NzE0BGdycElkAzIzMDczMTYEZ3Jwc3BJZAMxNzA2NTU0MjA1BHNlYwNmdHIEc2xrA250cGM
Ec3RpbWUDMTI5Mjk3OTIyNA--> Start a New Topic
Messages in this topic
JiBF9TAzk3MzU5NzE0BGdycElkAzIzMDczMTYEZ3Jwc3BJZAMxNzA2NTU0MjA1BG1zZ0lkAzQwNj
E0BHNlYwNmdHIEc2xrA3Z0cGMEc3RpbWUDMTI5Mjk3OTIyNAR0cGNJZAM0MDYwOA--> (5)
Recent Activity:
Reply by ●December 21, 20102010-12-21
Sorry for the blank message all. I hit the wrong key!! DOH!
Heru, I have contacted you off list to discuss this.
Dave...
---
Very funny Scotty, now beam down my clothes!!!
---
From: r... [mailto:r...] On
Behalf Of Heru Setiawan
Sent: 22 December 2010 07:53
To: r...
Subject: Re: [rabbit-semi] Where to by pk-2200
Hi Mr. Dave
it is difficult for me to get pk2200, can you supply it for me?
Regards
Heru, I have contacted you off list to discuss this.
Dave...
---
Very funny Scotty, now beam down my clothes!!!
---
From: r... [mailto:r...] On
Behalf Of Heru Setiawan
Sent: 22 December 2010 07:53
To: r...
Subject: Re: [rabbit-semi] Where to by pk-2200
Hi Mr. Dave
it is difficult for me to get pk2200, can you supply it for me?
Regards
