Hi Ernie. Well, at the same! Except if someone from P&E sent it directly to me (and I don't remember). For sure, the v1.02 does not work. Regards, Gilles At 03:28 PM 10/27/2003, you wrote: >Hi Gilles, >The version of the PEMicro unsecure that I am using is >V1.02. That is the latest version that I saw on >PEMicro's website. Where did you get V1.03? >Thanks, >Ernie > >--- Original Message --- >From: Gilles Blanquin <> >To: >Subject: Re: [68HC12] E128 Sector Erase > > > > >Hi Ernie. > > > >About unsecuring: Make sure you have "version 1.03" >if "unsecure_12.exe". > >It is displayed when you start the tool. Previous >releases of the tool > >might not work. > > > >Regards, > >Gilles > > > > > >At 06:55 AM 10/27/2003, you wrote: > >>Has anyone been succesful in converting the >bootloader from a 256K device to > >>a 128K device - particularly the 9S12E128. I am in >the process of doing > >>this and I have been getting the Flash Erase error. >Perhaps, this corrected > >>info (below) on the sector size may help. >Unfortunately, I can not try it > >>this time - I saw this info after I accidentally >secured the micro. I tried > >>to unsecure it using PEMICRO unsecure_12 with no >success. > >> > >>Ernie. > >> > >>----- Original Message ----- > >>From: "Gordon Doughman" <> > >>To: <> > >>Sent: Wednesday, October 01, 2003 2:45 PM > >>Subject: Re: [68HC12] E128 Sector Erase > >> > >> > >> > Bruce, > >> > > >> > The S12FTS128KV1/D > >> > > >><http://e- >www.motorola.com/files/microcontrollers/doc/ref_manual/ >S12FTS128KV>>1.pdf> > >> > document available on the E128 Product Summary >page is not the correct > >> > Flash block guide for the E128. The E128 contains >a single 128K flash > >> > block with a 1024 byte sector size. I'll notify >the proper people to get > >> > the correct Block Guide on the web. > >> > > >> > Regards, > >> > Gordon > >> > > >> > Bruce McMillan wrote: > >> > > >> > >Hi, > >> > >Can anyone confirm that the sector erase size on >the S12E128 is 512 > >> > >bytes - the module covering the Flash says both >512Bytes and 256Bytes. > >> > > > >> > >tks > >> > >Bruce > >> > > > >> > > > >> > > > >> > >------------- >------- > >> > > > >> > > > >> > > > >> > >">http://docs.yahoo.com/info/terms/ > >> > > > >> > > > >> > > > >> > > >> > -- > >> > >======================================================= >======== > >> > Gordon Doughman Ph: 937-438-6811 > >> > Motorola Semiconductor Fax: 937-434-7457 > >> > Field Applications Engineer Pager: 800-759- >8352 Pin: 1304089 > >> > Suite 175 > >> > 3131 Newmark Drive > >> > Miamisburg, OH 45342 > >> > > >> > Check out my HC12 book at: > >> > http://www.rtcbooks.com/programming.php > >> > > >> > > >> > > >> > > >> > > >> > -------------- >------ > >> > > >> > > >> > > >> > ">http://docs.yahoo.com/info/terms/ > >> > > >> > > >> > >> > >> > >>----------------- >--- > >> > >> > >> > >>">http://docs.yahoo.com/info/terms/ > > > > > >------------------------ Yahoo! Groups Sponsor ------- > > > >------------------ >-- > > > > > > > >">http://docs.yahoo.com/info/terms/ > > > > > >-------------------- > >">http://docs.yahoo.com/info/terms/ |
|
E128 Sector Erase
Started by ●September 30, 2003
Reply by ●October 27, 20032003-10-27
Reply by ●October 27, 20032003-10-27
Hello All: I apologize for the confusion here. We will post the latest version of unsecure_12 on the P&E website by the end of the day. - Mark P&E Gilles Blanquin wrote: >Hi Ernie. > >Well, at the same! Except if someone from P&E sent it directly to me (and I >don't remember). For sure, the v1.02 does not work. > >Regards, >Gilles >At 03:28 PM 10/27/2003, you wrote: >>Hi Gilles, >>The version of the PEMicro unsecure that I am using is >>V1.02. That is the latest version that I saw on >>PEMicro's website. Where did you get V1.03? >>Thanks, >>Ernie >> >>--- Original Message --- >>From: Gilles Blanquin <> >>To: >>Subject: Re: [68HC12] E128 Sector Erase >> >> >> >>>Hi Ernie. >>> >>>About unsecuring: Make sure you have "version 1.03" >>> >>> >>if "unsecure_12.exe". >> >> >>>It is displayed when you start the tool. Previous >>> >>> >>releases of the tool >> >> >>>might not work. >>> >>>Regards, >>>Gilles >>> >>> >>>At 06:55 AM 10/27/2003, you wrote: >>> >>> >>>>Has anyone been succesful in converting the >>>> >>>> >>bootloader from a 256K device to >> >> >>>>a 128K device - particularly the 9S12E128. I am in >>>> >>>> >>the process of doing >> >> >>>>this and I have been getting the Flash Erase error. >>>> >>>> >>Perhaps, this corrected >> >> >>>>info (below) on the sector size may help. >>>> >>>> >>Unfortunately, I can not try it >> >> >>>>this time - I saw this info after I accidentally >>>> >>>> >>secured the micro. I tried >> >> >>>>to unsecure it using PEMICRO unsecure_12 with no >>>> >>>> >>success. >> >> >>>>Ernie. >>>> >>>>----- Original Message ----- >>>>From: "Gordon Doughman" <> >>>>To: <> >>>>Sent: Wednesday, October 01, 2003 2:45 PM >>>>Subject: Re: [68HC12] E128 Sector Erase >>>> >>>> >>>> >>>> >>>>>Bruce, >>>>> >>>>>The S12FTS128KV1/D >>>>> >>>>> >>>>> >>>><http://e- >>>> >>>> >>www.motorola.com/files/microcontrollers/doc/ref_manual/ >>S12FTS128KV>>1.pdf> >> >> >>>>>document available on the E128 Product Summary >>>>> >>>>> >>page is not the correct >> >> >>>>>Flash block guide for the E128. The E128 contains >>>>> >>>>> >>a single 128K flash >> >> >>>>>block with a 1024 byte sector size. I'll notify >>>>> >>>>> >>the proper people to get >> >> >>>>>the correct Block Guide on the web. >>>>> >>>>>Regards, >>>>>Gordon >>>>> >>>>>Bruce McMillan wrote: >>>>> >>>>> >>>>> >>>>>>Hi, >>>>>>Can anyone confirm that the sector erase size on >>>>>> >>>>>> >>the S12E128 is 512 >> >> >>>>>>bytes - the module covering the Flash says both >>>>>> >>>>>> >>512Bytes and 256Bytes. >> >> >>>>>>tks >>>>>>Bruce >>>>>> >>>>>> >>>>>> >>>>>>------------- >>>>>> >>>>>> >>------- >> >> >>>>>> >>>>>> >>>>>> >>>>>>">http://docs.yahoo.com/info/terms/ >> >> >>>>>> >>>>>> >>>>>> >>>>>-- >>>>> >>>>> >>>>> >>======================================================= >>======== >> >> >>>>>Gordon Doughman Ph: 937-438-6811 >>>>>Motorola Semiconductor Fax: 937-434-7457 >>>>>Field Applications Engineer Pager: 800-759- >>>>> >>>>> >>8352 Pin: 1304089 >> >> >>>>>Suite 175 >>>>>3131 Newmark Drive >>>>>Miamisburg, OH 45342 >>>>> >>>>>Check out my HC12 book at: >>>>>http://www.rtcbooks.com/programming.php >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>-------------- >>>>> >>>>> >>------ >> >> >>>>> >>>>> >>>>> >>>>>">http://docs.yahoo.com/info/terms/ >> >> >>>>> >>>>> >>>> >>>>----------------- >>>> >>>> >>--- >> >> >>>> >>>> >>>> >>>>">http://docs.yahoo.com/info/terms/ >> >> >>>------------------------ Yahoo! Groups Sponsor ------- >>> >>>------------------ >>> >>> >>-- >> >> >>> >>> >>> >>>">http://docs.yahoo.com/info/terms/ >> >> >>> >>> >> >> >>-------------------- >> >> >> >>">http://docs.yahoo.com/info/terms/ >> > > >-------------------- > >">http://docs.yahoo.com/info/terms/ -- ________________________________ Mark L. Cukier, Design Engineer P&E Microcomputer Systems 710 Commonwealth Avenue Boston, MA 02215 ______________________________ e-mail: phone : (617) 353-9206 x19 fax : (617) 353-9205 ______________________________ visit us on the web at: http://www.pemicro.com |