I think I would dump this on s...@at91.com as my next
step. Atmel should help you to resolve this.
Al
From: A...@yahoogroups.com
[mailto:A...@yahoogroups.com] On Behalf Of Henk Visser Sent:
Wednesday, November 16, 2005 2:23 PM To: A...@yahoogroups.com Subject: Re: [AT91SAM7] CrossConnect and CrossWorks anyone? I need help
with first download
Al,
Thanks. I called Lloyd and he didn't have
much to say. I don't understand why it is so difficult to get help
with this.
-Henk
----- Original Message -----
From: Al Welch
To: A...@yahoogroups.com
Sent: Wednesday, November 16, 2005 12:02
PM
Subject: RE: [AT91SAM7] CrossConnect and
CrossWorks anyone? I need help with first download
Hi Henk
Reminder that the Atmel FAE in your area is as shown
below. Perhaps you should invite him to drop by and see what is going
on?
From: A...@yahoogroups.com
[mailto:A...@yahoogroups.com] On Behalf Of Henk Visser Sent:
Wednesday, November 16, 2005 11:53 AM To: A...@yahoogroups.com Subject: Re: [AT91SAM7] CrossConnect and CrossWorks anyone? I need help
with first download
I have tried but I am getting zero information
from them.
-Henk
----- Original Message -----
From: Michael Johnson
To: A...@yahoogroups.com
Sent: Tuesday, November 15, 2005 7:29
PM
Subject: Re: [AT91SAM7] CrossConnect and
CrossWorks anyone? I need help with first download
Hi Henk,
Sorry - I thought you were using
CrossWorks. Have you talked to IAR or ATMEL about this?
Regards Michael
> Mike, > > I am
using the IAR embedded workbench. Have you heard anything about >
IAR and the issues I a having? > > Thanks. > > -Henk > > > ----- Original Message ----- > *From:* Michael Johnson
<mailto:m...@rowley.co.uk> > *To:*
A...@yahoogroups.com <mailto:A...@yahoogroups.com> > *Sent:* Monday, November 14, 2005 11:04 PM > *Subject:* Re: [AT91SAM7] CrossConnect and
CrossWorks anyone? I > need help with first
download > > Hi Henk, > > The loader in the current CrossWorks product
doesn't clear lock > bits - I > can send you an updated one if you want. Also the
latest Segger > J-Link > firmware doesn't want to run the SAM7S reset
script which we are > investigating. > > Regards > Michael > > > I still have unresolved issues on why I am
receiveing verify > errors on > > our SAM764's. If you find anything out
please post. > > > > Thanks. >
> > > -Henk > > > > > > ----- Original
Message ----- > >
*From:* vt_snapshot <mailto:v...@yahoo.com> > > *To:*
A...@yahoogroups.com <mailto:A...@yahoogroups.com> > > *Sent:* Saturday,
November 12, 2005 6:32 PM >
> *Subject:* [AT91SAM7] CrossConnect and CrossWorks
anyone? I need > >
help with first download > > > > Hello Everyone, > > >
> I'm new here. I just got started on my
first ARM project after >
> spending years on the Atmel AVR family. > > I bought the
CrossWorks for ARM IDE and the Cross Connect JTAG > > adapter. > > >
> I'm trying to get my first test program to
download. > > It sees
the Cross Connect USB adapter and even can read my > target >
> device. >
> It says downloading "Loader.exe" to USB
CrossConnect. > > It
passes that OK. > >
It's when it downloads my test program into into the SAM7S64 > that it >
> gets a verify error. > > >
> I'm told there might be a possible Flash
programming issue > with the > > SAM764 at Atmel
right now. Has anyone else seen this or had >
problems > > with the
combo of tools I'm using? > > > > I've tried a
few different crystals (16MHz, 8MHz, 6MHz) and >
also tried > > a
number of fast and slow JTAG clocking speeds. >
> Same problem each time. > > >
> Any suggestions to a first timer on the ARM? > > > > > > > > > > > > > > > > > > > >
> >. > > > > >
> > > > >
>.>
Reply by vt_snapshot●November 16, 20052005-11-16
When I was originally debugging my flash programming issue, I came
across the warnings in the data sheets about needing a fast VDDCORE
ramp up of 6V/ms I believe.
I looked at my original setup and found I was too slow if I turned my
power supply on vs. flipping the On/OFF switch on my test board.
In the end, the problem I had was solved by a new boot loader, but I
have seen where if I power up by the power supply switch, I get goofy
results. If the power supply capacitors are already up to voltage and
I flip the switch on my board, it works just fine.
So this power up process could be important for flash programming.
As for running once it is programmed, it seems to not matter as much
what happens on the power up cycle.
I'm very new to this chip so my experience is limited to a few dozen
flips of the power switch and shouldn't be taken as a final conclusion.
Reply by Al Welch●November 16, 20052005-11-16
Hi Henk
Reminder that the Atmel FAE in your area is as shown
below. Perhaps you should invite him to drop by and see what is going
on?
From: A...@yahoogroups.com
[mailto:A...@yahoogroups.com] On Behalf Of Henk Visser Sent:
Wednesday, November 16, 2005 11:53 AM To: A...@yahoogroups.com Subject: Re: [AT91SAM7] CrossConnect and CrossWorks anyone? I need help
with first download
I have tried but I am getting zero information
from them.
-Henk
----- Original Message -----
From: Michael Johnson
To: A...@yahoogroups.com
Sent: Tuesday, November 15, 2005 7:29
PM
Subject: Re: [AT91SAM7] CrossConnect and
CrossWorks anyone? I need help with first download
Hi Henk,
Sorry - I thought you were using
CrossWorks. Have you talked to IAR or ATMEL about this?
Regards Michael
> Mike, > > I am
using the IAR embedded workbench. Have you heard anything about >
IAR and the issues I a having? > > Thanks. > > -Henk > > > ----- Original Message ----- > *From:* Michael Johnson
<mailto:m...@rowley.co.uk> > *To:*
A...@yahoogroups.com <mailto:A...@yahoogroups.com> > *Sent:* Monday, November 14, 2005 11:04 PM > *Subject:* Re: [AT91SAM7] CrossConnect and
CrossWorks anyone? I > need help with first
download > > Hi Henk, > > The loader in the current CrossWorks product
doesn't clear lock > bits - I > can send you an updated one if you want. Also the
latest Segger > J-Link > firmware doesn't want to run the SAM7S reset
script which we are > investigating. > > Regards > Michael > > > I still have unresolved issues on why I am
receiveing verify > errors on > > our SAM764's. If you find anything out
please post. > > > > Thanks. >
> > > -Henk > > > > > > ----- Original
Message ----- > >
*From:* vt_snapshot <mailto:v...@yahoo.com> > > *To:*
A...@yahoogroups.com <mailto:A...@yahoogroups.com> > > *Sent:* Saturday,
November 12, 2005 6:32 PM >
> *Subject:* [AT91SAM7] CrossConnect and CrossWorks
anyone? I need > >
help with first download > > > > Hello Everyone, > > >
> I'm new here. I just got started on my
first ARM project after >
> spending years on the Atmel AVR family. > > I bought the
CrossWorks for ARM IDE and the Cross Connect JTAG > > adapter. > > >
> I'm trying to get my first test program to
download. > > It sees
the Cross Connect USB adapter and even can read my > target >
> device. >
> It says downloading "Loader.exe" to USB
CrossConnect. > > It
passes that OK. > >
It's when it downloads my test program into into the SAM7S64 > that it >
> gets a verify error. > > >
> I'm told there might be a possible Flash
programming issue > with the > > SAM764 at Atmel
right now. Has anyone else seen this or had >
problems > > with the
combo of tools I'm using? > > > > I've tried a
few different crystals (16MHz, 8MHz, 6MHz) and >
also tried > > a
number of fast and slow JTAG clocking speeds. >
> Same problem each time. > > >
> Any suggestions to a first timer on the ARM? > > > > > > > > > > > > > > > > > > > >
> >. > > > > >
> > > > >
>.>
Reply by Henk Visser●November 18, 20052005-11-18
Thanks Al! I just emailed
them!
----- Original Message -----
From: Al Welch
To: A...@yahoogroups.com
Sent: Wednesday, November 16, 2005 2:26
PM
Subject: RE: [AT91SAM7] CrossConnect and
CrossWorks anyone? I need help with first download
Henk
I think I would dump this on s...@at91.com as my next
step. Atmel should help you to resolve this.
Al
From: A...@yahoogroups.com
[mailto:A...@yahoogroups.com] On Behalf Of Henk Visser Sent:
Wednesday, November 16, 2005 2:23 PM To: A...@yahoogroups.com Subject: Re: [AT91SAM7] CrossConnect and CrossWorks anyone? I need help
with first download
Al,
Thanks. I called Lloyd and he didn't have
much to say. I don't understand why it is so difficult to get help
with this.
-Henk
----- Original Message -----
From: Al Welch
To: A...@yahoogroups.com
Sent: Wednesday, November 16, 2005 12:02
PM
Subject: RE: [AT91SAM7] CrossConnect and
CrossWorks anyone? I need help with first download
Hi Henk
Reminder that the Atmel FAE in your area is as shown
below. Perhaps you should invite him to drop by and see what is going
on?
From: A...@yahoogroups.com
[mailto:A...@yahoogroups.com] On Behalf Of Henk Visser Sent:
Wednesday, November 16, 2005 11:53 AM To: A...@yahoogroups.com Subject: Re: [AT91SAM7] CrossConnect and CrossWorks anyone? I need help
with first download
I have tried but I am getting zero information
from them.
-Henk
----- Original Message -----
From: Michael Johnson
To: A...@yahoogroups.com
Sent: Tuesday, November 15, 2005 7:29
PM
Subject: Re: [AT91SAM7] CrossConnect and
CrossWorks anyone? I need help with first download
Hi Henk,
Sorry - I thought you were using
CrossWorks. Have you talked to IAR or ATMEL about this?
Regards Michael
> Mike, > > I am
using the IAR embedded workbench. Have you heard anything about >
IAR and the issues I a having? > > Thanks. > > -Henk > > > ----- Original Message ----- > *From:* Michael Johnson
<mailto:m...@rowley.co.uk> > *To:*
A...@yahoogroups.com <mailto:A...@yahoogroups.com> > *Sent:* Monday, November 14, 2005 11:04 PM > *Subject:* Re: [AT91SAM7] CrossConnect and
CrossWorks anyone? I > need help with first
download > > Hi Henk, > > The loader in the current CrossWorks product
doesn't clear lock > bits - I > can send you an updated one if you want. Also the
latest Segger > J-Link > firmware doesn't want to run the SAM7S reset
script which we are > investigating. > > Regards > Michael > > > I still have unresolved issues on why I am
receiveing verify > errors on > > our SAM764's. If you find anything out
please post. > > > > Thanks. >
> > > -Henk > > > > > > ----- Original
Message ----- > >
*From:* vt_snapshot <mailto:v...@yahoo.com> > > *To:*
A...@yahoogroups.com <mailto:A...@yahoogroups.com> > > *Sent:* Saturday,
November 12, 2005 6:32 PM >
> *Subject:* [AT91SAM7] CrossConnect and CrossWorks
anyone? I need > >
help with first download > > > > Hello Everyone, > > >
> I'm new here. I just got started on my
first ARM project after >
> spending years on the Atmel AVR family. > > I bought the
CrossWorks for ARM IDE and the Cross Connect JTAG > > adapter. > > >
> I'm trying to get my first test program to
download. > > It sees
the Cross Connect USB adapter and even can read my > target >
> device. >
> It says downloading "Loader.exe" to USB
CrossConnect. > > It
passes that OK. > >
It's when it downloads my test program into into the SAM7S64 > that it >
> gets a verify error. > > >
> I'm told there might be a possible Flash
programming issue > with the > > SAM764 at Atmel
right now. Has anyone else seen this or had >
problems > > with the
combo of tools I'm using? > > > > I've tried a
few different crystals (16MHz, 8MHz, 6MHz) and >
also tried > > a
number of fast and slow JTAG clocking speeds. >
> Same problem each time. > > >
> Any suggestions to a first timer on the ARM? > > > > > > > > > > > > > > > > > > > >
> >. > > > > >
> > > > >
>.>
