RS232<->RS584 converter

Started by ephimarginatus March 26, 2007
hi, i want to connect a sensor that has an output in RS485. What is
the Maxim part to convert that to RS232? Or other brand parts...
thanks for your help
Hi,

Attached is the link for Maxim :
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/4613

Hope this is what your looking.

Rosarite

-----Original Message-----
From: m...@gmail.com
To: b...
Sent: Mon, 26 Mar 2007 9:21 AM
Subject: [BasicX] RS232<->RS584 converter

hi, i want to connect a sensor that has an output in RS485. What is
the Maxim part to convert that to RS232? Or other brand parts...
thanks for your help

________________________________________________________________________
AOL now offers free email to everyone. Find out more about what's free from AOL at AOL.com.
Hi
Thank you.

Fernando

On 3/26/07, r...@aol.com wrote:
>
> Hi,
>
> Attached is the link for Maxim :
> http://www.maxim-ic.com/quick_view2.cfm/qv_pk/4613
>
> Hope this is what your looking.
>
> Rosarite
>
> -----Original Message-----
> From: m...@gmail.com
> To: b...
> Sent: Mon, 26 Mar 2007 9:21 AM
> Subject: [BasicX] RS232<->RS584 converter
>
> hi, i want to connect a sensor that has an output in RS485. What is
> the Maxim part to convert that to RS232? Or other brand parts...
> thanks for your help
> __________________________________________________________
> AOL now offers free email to everyone. Find out more about what's free
> from AOL at AOL.com.
>
>
>
>
>
Hi,

that surface mount right?
I need chips that have Through-hole pins. Any of those?

Fernando

On 3/26/07, r...@aol.com wrote:
>
> Hi,
>
> Attached is the link for Maxim :
> http://www.maxim-ic.com/quick_view2.cfm/qv_pk/4613
>
> Hope this is what your looking.
>
> Rosarite
>
> -----Original Message-----
> From: m...@gmail.com
> To: b...
> Sent: Mon, 26 Mar 2007 9:21 AM
> Subject: [BasicX] RS232<->RS584 converter
>
> hi, i want to connect a sensor that has an output in RS485. What is
> the Maxim part to convert that to RS232? Or other brand parts...
> thanks for your help
> __________________________________________________________
> AOL now offers free email to everyone. Find out more about what's free
> from AOL at AOL.com.
>
>
>
>
>
Hi,

Yes, must of them today are surfaces mount. Few are dip type ic's.

I found another but is a module already made here is the link:

http://www.costcentral.com/proddetail/ATEN/IC485S/499069/
rosarite
-----Original Message-----
From: m...@gmail.com
To: b...
Sent: Tue, 27 Mar 2007 3:03 AM
Subject: Re: [BasicX] RS232<->RS584 converter

Hi,

that surface mount right?
I need chips that have Through-hole pins. Any of those?

Fernando

On 3/26/07, r...@aol.com wrote:
>
> Hi,
>
> Attached is the link for Maxim :
> http://www.maxim-ic.com/quick_view2.cfm/qv_pk/4613
>
> Hope this is what your looking.
>
> Rosarite
>
>
>
> -----Original Message-----
> From: m...@gmail.com
> To: b...
> Sent: Mon, 26 Mar 2007 9:21 AM
> Subject: [BasicX] RS232<->RS584 converter
>
> hi, i want to connect a sensor that has an output in RS485. What is
> the Maxim part to convert that to RS232? Or other brand parts...
> thanks for your help
>
>
> __________________________________________________________
> AOL now offers free email to everyone. Find out more about what's free
> from AOL at AOL.com.
>
>
>
>
>



________________________________________________________________________
AOL now offers free email to everyone. Find out more about what's free from AOL at AOL.com.