Hi, my design "sample board" is connecting LPC2470 via 32 bit bus SRAM and SDRAM memory. SRAM works very well but SDRAM does not work. I use 2 devices WINBOND W9816G6IH, 512Kx2Banksx16bits. I need urgenly help somebody... how to setting EMC and init SDRAM to start works. SDRAM gets eror reading data after write. I thing init procedure is no right. Thank you.
LPC2470 - SDRAM does not work
Started by ●November 6, 2008
Reply by ●November 7, 20082008-11-07
On Nov 6, 5:52=A0am, "Matej755" <mate...@serd.cz> wrote:> Hi, > > my design "sample board" is connecting LPC2470 via 32 bit bus SRAM and > SDRAM memory. SRAM works very well but SDRAM does not work. I use 2 devic=es> WINBOND W9816G6IH, 512Kx2Banksx16bits. I need urgenly help somebody... ho=w> to setting EMC and init SDRAM to start works. SDRAM gets eror reading dat=a> after write. I thing init procedure is no right. > > Thank you.Hi Matej, there is a group for LPC2000 and you might want to check this thread http://tech.groups.yahoo.com/group/lpc2000/message/35981 An Schwob