Looking for a solution for transfering raw data (4.6 is not counting the overhead) wirelessly. I'm looking for a module solution, but would consider a chip. Im also thinking about what kind of syncronizign scheme to use. My word lenght will be 24 bits wide. Any suggestions?
wireless project - Date rate @ 4,608,000 bps
Started by ●April 7, 2005
Reply by ●April 8, 20052005-04-08
Mikal, What distance? 4.6 what bit bytes ? who is the source PC or any other system. You may consider WUSB if it is short distance it is 40 M bytes for 5 meters specs are being finised. best Rgards, kawshol
Reply by ●April 8, 20052005-04-08
I actually need to go no more than 100 feet (actually no more than about 20, but I've padded that figure). 4.6 Mbits per sec. I need the latency to be at an absolute min (no more than 10mS realistic?)
Reply by ●April 15, 20052005-04-15
Mikal wrote:> I actually need to go no more than 100 feet (actually no more than > about 20, but I've padded that figure). 4.6 Mbits per sec. I needthe> latency to be at an absolute min (no more than 10mS realistic?)I would modulate a beam of light.
Reply by ●April 15, 20052005-04-15