Hi all, Does anybody have any experience working with the Emicros I2C232 converter? I expected it to have a clock signal, but I am not getting a signal out at all. Is there some sort of command that needs to be sent to initialize it? Thanks, Ben
I2C232 from Emicros
Started by ●September 1, 2005
Reply by ●September 21, 20052005-09-21
"bb" <bbkennedy00@yahoo.com> schrieb im Newsbeitrag news:1125600096.553305.35270@o13g2000cwo.googlegroups.com...> converter? I expected it to have a clock signal, but I am not getting > a signal out at all. Is there some sort of command that needs to be > sent to initialize it? >Are you getting any response when sending an 's' or a 't' command? Is your bus termination set correctly i.e. is the interface able to pull the clock low at all? /Roland http://www.i2c-bus.org