<omalley.ronan@gmail.com> wrote in message news:1140622531.800329.256600@g47g2000cwa.googlegroups.com...> but what happens if there is a spike in the voltage on the 5v side of > the voltage divider? My dsp board cant tolerate anything greater than > 3.8V max. is the voltage divider really that reliable?The junction diodes on the 3.3V input to the VCC/GND will take care of that, while the current will be limited by the series resistor. Meindert
5V to 3.3V UART conversion
Started by ●February 22, 2006
Reply by ●February 22, 20062006-02-22