The bit in the MOR that controls the int pin for edge or edge & level sensitivity, does that apply only for interrupts, or also for BIH & BIL instructions?
68HC505J1A int pin edge/level sensitivity for BIH & BIL too?
Started by ●September 10, 2006
Reply by ●September 10, 20062006-09-10
IRQE does not affect the opcodes, they read the pin direct. The schematic is on page 87 of the databook/sheet ( "figure 1" ). MfG JRD
Reply by ●September 10, 20062006-09-10