Looking for FPGA design services in India or similar

Hi,

For a quite large project dealing with Virtex 4, DDR2, gigabit
ethernet and digital signal processing, I'm looking for a top of the
bill design house in a far east country like india.

All tips are welcome.

Best Regards,
Anom

searchfordesignservices@hotmail.com (Anom) wrote :

> Hi,
> 
> For a quite large project dealing with Virtex 4, DDR2, gigabit
> ethernet and digital signal processing, I'm looking for a top of the
> bill design house in a far east country like india.
> 
> All tips are welcome.

tip one - avoid India and China



Pozdrawiam.
-- 
RusH   //
 http://randki.o2.pl/profil.php?id_r=352019
Like ninjas, true hackers are shrouded in secrecy and mystery.
You may never know -- UNTIL IT'S TOO LATE.

On 22 Oct 2004 08:39:39 -0700, searchfordesignservices@hotmail.com
(Anom) wrote:

>For a quite large project dealing with Virtex 4, DDR2, gigabit
>ethernet and digital signal processing, I'm looking for a top of the
>bill design house in a far east country like india.
>
>All tips are welcome.

Following recent (second hand) experience of designs
done in India my tip is; try Australia then Europe or the
USA, in that order :)

Mike Harding

"Anom" <searchfordesignservices@hotmail.com> wrote in message
news:671a04d4.0410220739.8d21b45@posting.google.com...
> Hi,
>
> For a quite large project dealing with Virtex 4, DDR2, gigabit
> ethernet and digital signal processing, I'm looking for a top of the
> bill design house in a far east country like india.
>
> All tips are welcome.
>
> Best Regards,
> Anom

They dont exist.. and the one's you deal with will cost you more in the
final
analysis than if you had it done properly here or in europe..

"TheDoc" <TheDoc@ev1.net> wrote in message news:<10nlji0rrd8rr14@corp.supernews.com>...
> "Anom" <searchfordesignservices@hotmail.com> wrote in message
> news:671a04d4.0410220739.8d21b45@posting.google.com...
> > Hi,
> >
> > For a quite large project dealing with Virtex 4, DDR2, gigabit
> > ethernet and digital signal processing, I'm looking for a top of the
> > bill design house in a far east country like india.
> >
> > All tips are welcome.
> >
> > Best Regards,
> > Anom
> 
> They dont exist.. and the one's you deal with will cost you more in the
> final
> analysis than if you had it done properly here or in europe..

They exists, but not cheap.  Low skill labor costs in China/India are
USD$1 per hour.  High skill labor costs are over USD$10 per hour, plus
another USD$5 management/government fees.  Another consideration is
that unless you are planning on open-source, there is no way to
protect your invested IP.

This is not what you asked for - these guys are in the US.  They've
done a good job for me in the past.  They have experience with these
sorts of designs and parts:

www.bostondesignsolutions.com

Chris

searchfordesignservices@hotmail.com (Anom) wrote in message news:<671a04d4.0410220739.8d21b45@posting.google.com>...
> Hi,
> 
> For a quite large project dealing with Virtex 4, DDR2, gigabit
> ethernet and digital signal processing, I'm looking for a top of the
> bill design house in a far east country like india.
> 
> All tips are welcome.
> 
> Best Regards,
> Anom

Hi,

I should be able to help you on this. I have over two decades of
experience in developing state-of-the-art technologies in DSP, FPGA,
Video, Embedded Systems etc and with 15 years of experience in India
on these technologies, though for last 8 years I have been in the
Silicon valley. I know very well the industries there. Send me details
via e-mail if you are interested (vrms22@yahoo.com)

VRMS


searchfordesignservices@hotmail.com (Anom) wrote in message news:<671a04d4.0410220739.8d21b45@posting.google.com>...
> Hi,
> 
> For a quite large project dealing with Virtex 4, DDR2, gigabit
> ethernet and digital signal processing, I'm looking for a top of the
> bill design house in a far east country like india.
> 
> All tips are welcome.
> 
> Best Regards,
> Anom