I need information on how to add USB functinality - reading and writing from a mass storage device (DoK). My board is a PPC based, MPC5220 (freescale) Lite evaluation board, and I'm running on a VxWorks 5.5 version. Any help or a point to where to begin from, would be very helpful.
USB host on VxWorks 5.5 PPC 5200
Started by ●May 10, 2008
Reply by ●May 10, 20082008-05-10
<sfsharon@gmail.com> wrote in message news:891677e7-267d-4139-92c9-9c2b05ffc3c9@b64g2000hsa.googlegroups.com...>I need information on how to add USB functinality - reading and > writing from a mass storage device (DoK). My board is a PPC based, > MPC5220 (freescale) Lite evaluation board, and I'm running on a > VxWorks 5.5 version. Any help or a point to where to begin from, would > be very helpful.With the risk of pointing out the obvious - how about starting with talking to your Wind River rep? -- Regards, Richard. + http://www.FreeRTOS.org & http://www.FreeRTOS.org/shop 17 official architecture ports, more than 5000 downloads per month. + http://www.SafeRTOS.com Certified by T�V as meeting the requirements for safety related systems.
Reply by ●May 11, 20082008-05-11
Hello,> I need information on how to add USB functinality - reading and > writing from a mass storage device (DoK). My board is a PPC based, > MPC5220 (freescale) Lite evaluation board, and I'm running on a > VxWorks 5.5 version.Several of our customers are using On Time's RTUSB-32 (http://www.on-time.com/rtusb-32.htm on PPC targets with VxWorks. One of them has described the porting effort on http://www.on-time.com/testimonials.htm. A free Evaluation Kit of RTUSB-32 is available on http://www.on-time.com/rtos-32-eval.htm. It contains detailed information about porting RTUSB-32. It includes the licensing terms, the Programming and Reference Manuals, the complete source code of a System Driver (the porting layer of RTUSB-32), and the source code of six example programs using RTUSB-32. Peter