Is there a way for me to set the trace widths before I use the auto-router? It seems to autoroute with 5mil traces no matter what. Thanks in advance.
OrCAD PCB Editor (Alegro) question
Started by ●May 14, 2008
Reply by ●May 15, 20082008-05-15
On May 14, 5:07 am, "Joel" <joelben...@gmail.com> wrote:> Is there a way for me to set the trace widths before I use the auto-router? > It seems to autoroute with 5mil traces no matter what. > > Thanks in advance.Since no one else has chimed in, I'll offer this - I haven't used OrCad since the DOS days, but in most CAD packages you set the desired routing trace width (or range) in the Design Rules. HTH Bob
Reply by ●May 15, 20082008-05-15
>On May 14, 5:07 am, "Joel" <joelben...@gmail.com> wrote: >> Is there a way for me to set the trace widths before I use theauto-router?>> It seems to autoroute with 5mil traces no matter what. >> >> Thanks in advance. > >Since no one else has chimed in, I'll offer this - I haven't used >OrCad since the DOS days, but in most CAD packages you set the desired >routing trace width (or range) in the Design Rules. > >HTH > >Bob >Thank you, I did manage to figure it out. For anyone else who is wondering this: The width needs to be set in the "Alegro Constraint Manager."