|
Hi, I have a problem in communication between PC (duron 1.3GHz) and 68HC11 (E1 and F1). After bootloader loaded every command brake communication and program ask me to reboot board. Changing down CPU speed with "Turbo" program does not give any effect . I try two board and situation is indentical . Velja |
|
|
Problem with Jbug11
Started by ●March 9, 2003
Reply by ●March 9, 20032003-03-09
|
Velja, You may want to try a different baud rate for your communication.. In the Setting menu, try to change the communication baud rate to 7680 or 1187 Baud. Good luck. Regards. Jean ----- Original Message ----- From: "Velja" <> To: <>; <> Sent: Sunday, March 09, 2003 5:33 AM Subject: [m68HC11] Problem with Jbug11 > Hi, > > I have a problem in communication between PC (duron 1.3GHz) and 68HC11 (E1 > and F1). After bootloader loaded every command brake communication and > program ask me to reboot board. Changing down CPU speed with "Turbo" program > does not give any effect . I try two board and situation is indentical . > > Velja > To unsubscribe from this group, send an email to: > > > ">http://docs.yahoo.com/info/terms/ |
