Specifications for 38 pin Mictor Connector

Started by vrrraju February 21, 2004
Dear Friends,

I am designing a board for LPC2106 which I want to have provision for
ETM trace and secondary JTAG. I want to have a 38-pin Mictor
connector for the same. Please suggest me which one to use and where
can I find one for my board. I need full specs for the same.

Thanks in advance.

with love

Raju



An Engineer's Guide to the LPC2100 Series


----- Original Message -----
From: "vrrraju" <>
To: <>
Sent: Saturday, February 21, 2004 3:36 PM
Subject: [lpc2000] Specifications for 38 pin Mictor Connector > Dear Friends,
>
> I am designing a board for LPC2106 which I want to have provision for
> ETM trace and secondary JTAG. I want to have a 38-pin Mictor
> connector for the same. Please suggest me which one to use and where
> can I find one for my board. I need full specs for the same.

Samtec makes compatible connectors, they might be easier to find.

Leon
--
Leon Heller, G1HSM
Email:
My low-cost Philips LPC210x ARM development system:
http://webspace.webring.com/people/jl/leon_heller//lpc2104.html




Hi,
We have an Application Product Brief at
http://www.ashling.com/technicalarticles/APB156-V5U-ARMConnect.pdf that
outlines pinouts and recommended connectors for ARM EmbeddedICE and ETM
debug.

We recommend the AMP MICTOR 38-way receptacle connector, 0.025" pitch,
such as AMP part number 2-767004-2. Hugh @ http://www.ashling.com/support/lpc2100/ > -----Original Message-----
> From: Leon Heller [mailto:]
> Sent: 21 February 2004 17:03
> To:
> Subject: Re: [lpc2000] Specifications for 38 pin Mictor Connector >
> ----- Original Message -----
> From: "vrrraju" <>
> To: <>
> Sent: Saturday, February 21, 2004 3:36 PM
> Subject: [lpc2000] Specifications for 38 pin Mictor Connector > > Dear Friends,
> >
> > I am designing a board for LPC2106 which I want to have
> provision for
> > ETM trace and secondary JTAG. I want to have a 38-pin Mictor
> > connector for the same. Please suggest me which one to use
> and where
> > can I find one for my board. I need full specs for the same.
>
> Samtec makes compatible connectors, they might be easier to find.
>
> Leon
> --
> Leon Heller, G1HSM
> Email:
> My low-cost Philips LPC210x ARM development system:
> http://webspace.webring.com/people/jl/leon_heller//lpc2104.h> tml >
> Yahoo!
> Groups Links
>
> http://groups.yahoo.com/group/lpc2000/ >
>