> > I did not copy your design exactly and I did not
have low voltage
> > 74244 device so I used 74HC244.
>
> I'm using the 74HC244. What changes did you make?
>
> Leon
>
I would send you schematics (in jpg format) of jtag wiggler that i
made. Give me your e-mail adress.
Zarko
INTERESTING Rowley Crossworks 1.7 - jtag wiggler problem
Started by ●February 19, 2008
Reply by ●February 19, 20082008-02-19
Reply by ●February 19, 20082008-02-19
----- Original Message -----
From: "zarko.nikolic"
To:
Sent: Tuesday, February 19, 2008 1:02 PM
Subject: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag wiggler
problem
>
>> > I did not copy your design exactly and I did not have low voltage
>> > 74244 device so I used 74HC244.
>>
>> I'm using the 74HC244. What changes did you make?
>>
>> Leon
>>
> I would send you schematics (in jpg format) of jtag wiggler that i
> made. Give me your e-mail adress.
If you used my schematic it should work.
Leon
From: "zarko.nikolic"
To:
Sent: Tuesday, February 19, 2008 1:02 PM
Subject: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag wiggler
problem
>
>> > I did not copy your design exactly and I did not have low voltage
>> > 74244 device so I used 74HC244.
>>
>> I'm using the 74HC244. What changes did you make?
>>
>> Leon
>>
> I would send you schematics (in jpg format) of jtag wiggler that i
> made. Give me your e-mail adress.
If you used my schematic it should work.
Leon
Reply by ●February 19, 20082008-02-19
> If you used my schematic it should work.
>
> Leon
>
I found that when i power on my LPC (Keil MCB2148) board I need to
reset MCU by onboard reset switch after that CrossWorks recognizes my
LPC2148.
Thanks for your replies.
Zarko
>
> Leon
>
I found that when i power on my LPC (Keil MCB2148) board I need to
reset MCU by onboard reset switch after that CrossWorks recognizes my
LPC2148.
Thanks for your replies.
Zarko
Reply by ●February 19, 20082008-02-19
Ok, I just wondered how you're still using CrossWorks when you evaluated
for
30 days in December 2006? Unless I'm mistaken, of course, I don't see
another activation from your address. That's all.
> -----Original Message-----
> From: l... [mailto:l...] On
> Behalf Of jsmaiabr
> Sent: 19 February 2008 16:44
> To: l...
> Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> wiggler problem
>
> Sorry, I don't understand. May you be more clear?
> Regards,
> Maia
>
> -------Original Message-------
>
> From: Paul Curtis
> Date: 19/2/2008 09:09:55
> To: l...
> Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> wiggler
> problem
>
> Hi,
>
> > Mine works without any problem with CW + LPC (don't need H-JTAG).
> Works
> > with CW + STM32 too, but after some time of use Windows XP give me a
> blue
> > screen.
>
> That's for our extra-special-value customers.
>
> --
> Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
> CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
>
>
>
30 days in December 2006? Unless I'm mistaken, of course, I don't see
another activation from your address. That's all.
> -----Original Message-----
> From: l... [mailto:l...] On
> Behalf Of jsmaiabr
> Sent: 19 February 2008 16:44
> To: l...
> Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> wiggler problem
>
> Sorry, I don't understand. May you be more clear?
> Regards,
> Maia
>
> -------Original Message-------
>
> From: Paul Curtis
> Date: 19/2/2008 09:09:55
> To: l...
> Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> wiggler
> problem
>
> Hi,
>
> > Mine works without any problem with CW + LPC (don't need H-JTAG).
> Works
> > with CW + STM32 too, but after some time of use Windows XP give me a
> blue
> > screen.
>
> That's for our extra-special-value customers.
>
> --
> Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
> CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
>
>
>
Reply by ●February 19, 20082008-02-19
Sorry, I don't understand. May you be more clear?
Regards,
Maia
-------Original Message-------
From: Paul Curtis
Date: 19/2/2008 09:09:55
To: l...
Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag wiggler
problem
Hi,
> Mine works without any problem with CW + LPC (don't need H-JTAG). Works
> with CW + STM32 too, but after some time of use Windows XP give me a blue
> screen.
That's for our extra-special-value customers.
--
Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
Regards,
Maia
-------Original Message-------
From: Paul Curtis
Date: 19/2/2008 09:09:55
To: l...
Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag wiggler
problem
Hi,
> Mine works without any problem with CW + LPC (don't need H-JTAG). Works
> with CW + STM32 too, but after some time of use Windows XP give me a blue
> screen.
That's for our extra-special-value customers.
--
Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
Reply by ●February 19, 20082008-02-19
What you say now?
-------Original Message-------
From: license
Date: 14/1/2008 05:54:45
To: Maia
Subject: Re: CrossWorks for ARM 1.7 Evaluation Registration
026ZJ-17N1P-NUTXU-C9FIE-JRGC6-F7FKM-MQXMX-HK2QA-PHGCI-REH5V+
F4XV4-KNDL7-QN1W6-1KK0P-O8O2S-01CAD-75EXZ-OH31L-WAO7E-ZVN16
> I would like to evaluate CrossWorks for 30 days. My evaluation
> registration key is:
> 12JX7-6JW84-JMUAV-3LORI-BZLWF-T4IAN-SC4RF-Z0MWF-XOBUS-X5R60+
> JT9PI-D3TMN-DJIDY-RHPHL-TC1HL-R5Q3X-6JFZF-4UP4Y-B7T52-MWC4A I
> understand that this is for evaluation only and must not be used for
> commercial purposes. Thanks.
>
-------Original Message-------
From: Paul Curtis
Date: 19/2/2008 13:46:37
To: l...
Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag wiggler
problem
Ok, I just wondered how you're still using CrossWorks when you evaluated for
30 days in December 2006? Unless I'm mistaken, of course, I don't see
another activation from your address. That's all.
> -----Original Message-----
> From: l... [mailto:l...] On
> Behalf Of jsmaiabr
> Sent: 19 February 2008 16:44
> To: l...
> Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> wiggler problem
>
> Sorry, I don't understand. May you be more clear?
> Regards,
> Maia
>
> -------Original Message-------
>
> From: Paul Curtis
> Date: 19/2/2008 09:09:55
> To: l...
> Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> wiggler
> problem
>
> Hi,
>
> > Mine works without any problem with CW + LPC (don't need H-JTAG).
> Works
> > with CW + STM32 too, but after some time of use Windows XP give me a
> blue
> > screen.
>
> That's for our extra-special-value customers.
>
> --
> Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
> CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
>
>
>
-------Original Message-------
From: license
Date: 14/1/2008 05:54:45
To: Maia
Subject: Re: CrossWorks for ARM 1.7 Evaluation Registration
026ZJ-17N1P-NUTXU-C9FIE-JRGC6-F7FKM-MQXMX-HK2QA-PHGCI-REH5V+
F4XV4-KNDL7-QN1W6-1KK0P-O8O2S-01CAD-75EXZ-OH31L-WAO7E-ZVN16
> I would like to evaluate CrossWorks for 30 days. My evaluation
> registration key is:
> 12JX7-6JW84-JMUAV-3LORI-BZLWF-T4IAN-SC4RF-Z0MWF-XOBUS-X5R60+
> JT9PI-D3TMN-DJIDY-RHPHL-TC1HL-R5Q3X-6JFZF-4UP4Y-B7T52-MWC4A I
> understand that this is for evaluation only and must not be used for
> commercial purposes. Thanks.
>
-------Original Message-------
From: Paul Curtis
Date: 19/2/2008 13:46:37
To: l...
Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag wiggler
problem
Ok, I just wondered how you're still using CrossWorks when you evaluated for
30 days in December 2006? Unless I'm mistaken, of course, I don't see
another activation from your address. That's all.
> -----Original Message-----
> From: l... [mailto:l...] On
> Behalf Of jsmaiabr
> Sent: 19 February 2008 16:44
> To: l...
> Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> wiggler problem
>
> Sorry, I don't understand. May you be more clear?
> Regards,
> Maia
>
> -------Original Message-------
>
> From: Paul Curtis
> Date: 19/2/2008 09:09:55
> To: l...
> Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> wiggler
> problem
>
> Hi,
>
> > Mine works without any problem with CW + LPC (don't need H-JTAG).
> Works
> > with CW + STM32 too, but after some time of use Windows XP give me a
> blue
> > screen.
>
> That's for our extra-special-value customers.
>
> --
> Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
> CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
>
>
>
Reply by ●February 19, 20082008-02-19
Hi,
> > I suggest that you reduce the TCK frequency by increasing the clock
> divider and see if that helps. nTRST isn't used by CrossWorks, nSRST is
> though.
> >
> > --
> > Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
> > CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
> > I already tried reducing TCK frequency in Crossworks but it does not
> help.
>
> Yet my wiggler clone works with H-JTAG at highest speed.
>
> Is there a way to use h-jtag with crossworks?
Nope.
--
Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
> > I suggest that you reduce the TCK frequency by increasing the clock
> divider and see if that helps. nTRST isn't used by CrossWorks, nSRST is
> though.
> >
> > --
> > Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
> > CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
> > I already tried reducing TCK frequency in Crossworks but it does not
> help.
>
> Yet my wiggler clone works with H-JTAG at highest speed.
>
> Is there a way to use h-jtag with crossworks?
Nope.
--
Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
Reply by ●February 19, 20082008-02-19
By my calculation, the time between your license time and Paul's
response is 36 days, 7 hours, 52 minutes.
--- In l..., "jsmaiabr" wrote:
> What you say now?
>
> -------Original Message-------
>
> From: license
> Date: 14/1/2008 05:54:45
> To: Maia
> Subject: Re: CrossWorks for ARM 1.7 Evaluation Registration
>
> 026ZJ-17N1P-NUTXU-C9FIE-JRGC6-F7FKM-MQXMX-HK2QA-PHGCI-REH5V+
> F4XV4-KNDL7-QN1W6-1KK0P-O8O2S-01CAD-75EXZ-OH31L-WAO7E-ZVN16
> > I would like to evaluate CrossWorks for 30 days. My evaluation
> > registration key is:
> > 12JX7-6JW84-JMUAV-3LORI-BZLWF-T4IAN-SC4RF-Z0MWF-XOBUS-X5R60+
> > JT9PI-D3TMN-DJIDY-RHPHL-TC1HL-R5Q3X-6JFZF-4UP4Y-B7T52-MWC4A I
> > understand that this is for evaluation only and must not be used for
> > commercial purposes. Thanks.
> >
>
>
> -------Original Message-------
>
> From: Paul Curtis
> Date: 19/2/2008 13:46:37
> To: l...
> Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
wiggler
> problem
>
> Ok, I just wondered how you're still using CrossWorks when you
evaluated for
> 30 days in December 2006? Unless I'm mistaken, of course, I don't see
> another activation from your address. That's all.
>
> > -----Original Message-----
> > From: l... [mailto:l...] On
> > Behalf Of jsmaiabr
> > Sent: 19 February 2008 16:44
> > To: l...
> > Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> > wiggler problem
> >
> > Sorry, I don't understand. May you be more clear?
> > Regards,
> > Maia
>
> >
> > -------Original Message-------
> >
> > From: Paul Curtis
> > Date: 19/2/2008 09:09:55
> > To: l...
> > Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> > wiggler
> > problem
> >
> > Hi,
> >
> > > Mine works without any problem with CW + LPC (don't need H-JTAG).
> > Works
> > > with CW + STM32 too, but after some time of use Windows XP give me a
> > blue
> > > screen.
> >
> > That's for our extra-special-value customers.
> >
> > --
> > Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
> > CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
response is 36 days, 7 hours, 52 minutes.
--- In l..., "jsmaiabr" wrote:
> What you say now?
>
> -------Original Message-------
>
> From: license
> Date: 14/1/2008 05:54:45
> To: Maia
> Subject: Re: CrossWorks for ARM 1.7 Evaluation Registration
>
> 026ZJ-17N1P-NUTXU-C9FIE-JRGC6-F7FKM-MQXMX-HK2QA-PHGCI-REH5V+
> F4XV4-KNDL7-QN1W6-1KK0P-O8O2S-01CAD-75EXZ-OH31L-WAO7E-ZVN16
> > I would like to evaluate CrossWorks for 30 days. My evaluation
> > registration key is:
> > 12JX7-6JW84-JMUAV-3LORI-BZLWF-T4IAN-SC4RF-Z0MWF-XOBUS-X5R60+
> > JT9PI-D3TMN-DJIDY-RHPHL-TC1HL-R5Q3X-6JFZF-4UP4Y-B7T52-MWC4A I
> > understand that this is for evaluation only and must not be used for
> > commercial purposes. Thanks.
> >
>
>
> -------Original Message-------
>
> From: Paul Curtis
> Date: 19/2/2008 13:46:37
> To: l...
> Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
wiggler
> problem
>
> Ok, I just wondered how you're still using CrossWorks when you
evaluated for
> 30 days in December 2006? Unless I'm mistaken, of course, I don't see
> another activation from your address. That's all.
>
> > -----Original Message-----
> > From: l... [mailto:l...] On
> > Behalf Of jsmaiabr
> > Sent: 19 February 2008 16:44
> > To: l...
> > Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> > wiggler problem
> >
> > Sorry, I don't understand. May you be more clear?
> > Regards,
> > Maia
>
> >
> > -------Original Message-------
> >
> > From: Paul Curtis
> > Date: 19/2/2008 09:09:55
> > To: l...
> > Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> > wiggler
> > problem
> >
> > Hi,
> >
> > > Mine works without any problem with CW + LPC (don't need H-JTAG).
> > Works
> > > with CW + STM32 too, but after some time of use Windows XP give me a
> > blue
> > > screen.
> >
> > That's for our extra-special-value customers.
> >
> > --
> > Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
> > CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
Reply by ●February 20, 20082008-02-20
36 days from december 2006 to january 2008???? What planet you live?
-------Original Message-------
From: kdpainter
Date: 02/19/08 20:54:27
To: l...
Subject: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag wiggler
problem
By my calculation, the time between your license time and Paul's
response is 36 days, 7 hours, 52 minutes.
--- In l..., "jsmaiabr" wrote:
> What you say now?
>
> -------Original Message-------
>
> From: license
> Date: 14/1/2008 05:54:45
> To: Maia
> Subject: Re: CrossWorks for ARM 1.7 Evaluation Registration
>
> 026ZJ-17N1P-NUTXU-C9FIE-JRGC6-F7FKM-MQXMX-HK2QA-PHGCI-REH5V+
> F4XV4-KNDL7-QN1W6-1KK0P-O8O2S-01CAD-75EXZ-OH31L-WAO7E-ZVN16
> > I would like to evaluate CrossWorks for 30 days. My evaluation
> > registration key is:
> > 12JX7-6JW84-JMUAV-3LORI-BZLWF-T4IAN-SC4RF-Z0MWF-XOBUS-X5R60+
> > JT9PI-D3TMN-DJIDY-RHPHL-TC1HL-R5Q3X-6JFZF-4UP4Y-B7T52-MWC4A I
> > understand that this is for evaluation only and must not be used for
> > commercial purposes. Thanks.
> >
> -------Original Message-------
>
> From: Paul Curtis
> Date: 19/2/2008 13:46:37
> To: l...
> Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
wiggler
> problem
>
> Ok, I just wondered how you're still using CrossWorks when you
evaluated for
> 30 days in December 2006? Unless I'm mistaken, of course, I don't see
> another activation from your address. That's all.
>
> > -----Original Message-----
> > From: l... [mailto:l...] On
> > Behalf Of jsmaiabr
> > Sent: 19 February 2008 16:44
> > To: l...
> > Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> > wiggler problem
> >
> > Sorry, I don't understand. May you be more clear?
> > Regards,
> > Maia
>
> >
> > -------Original Message-------
> >
> > From: Paul Curtis
> > Date: 19/2/2008 09:09:55
> > To: l...
> > Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> > wiggler
> > problem
> >
> > Hi,
> >
> > > Mine works without any problem with CW + LPC (don't need H-JTAG).
> > Works
> > > with CW + STM32 too, but after some time of use Windows XP give me a
> > blue
> > > screen.
> >
> > That's for our extra-special-value customers.
> >
> > --
> > Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
> > CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
-------Original Message-------
From: kdpainter
Date: 02/19/08 20:54:27
To: l...
Subject: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag wiggler
problem
By my calculation, the time between your license time and Paul's
response is 36 days, 7 hours, 52 minutes.
--- In l..., "jsmaiabr" wrote:
> What you say now?
>
> -------Original Message-------
>
> From: license
> Date: 14/1/2008 05:54:45
> To: Maia
> Subject: Re: CrossWorks for ARM 1.7 Evaluation Registration
>
> 026ZJ-17N1P-NUTXU-C9FIE-JRGC6-F7FKM-MQXMX-HK2QA-PHGCI-REH5V+
> F4XV4-KNDL7-QN1W6-1KK0P-O8O2S-01CAD-75EXZ-OH31L-WAO7E-ZVN16
> > I would like to evaluate CrossWorks for 30 days. My evaluation
> > registration key is:
> > 12JX7-6JW84-JMUAV-3LORI-BZLWF-T4IAN-SC4RF-Z0MWF-XOBUS-X5R60+
> > JT9PI-D3TMN-DJIDY-RHPHL-TC1HL-R5Q3X-6JFZF-4UP4Y-B7T52-MWC4A I
> > understand that this is for evaluation only and must not be used for
> > commercial purposes. Thanks.
> >
> -------Original Message-------
>
> From: Paul Curtis
> Date: 19/2/2008 13:46:37
> To: l...
> Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
wiggler
> problem
>
> Ok, I just wondered how you're still using CrossWorks when you
evaluated for
> 30 days in December 2006? Unless I'm mistaken, of course, I don't see
> another activation from your address. That's all.
>
> > -----Original Message-----
> > From: l... [mailto:l...] On
> > Behalf Of jsmaiabr
> > Sent: 19 February 2008 16:44
> > To: l...
> > Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> > wiggler problem
> >
> > Sorry, I don't understand. May you be more clear?
> > Regards,
> > Maia
>
> >
> > -------Original Message-------
> >
> > From: Paul Curtis
> > Date: 19/2/2008 09:09:55
> > To: l...
> > Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> > wiggler
> > problem
> >
> > Hi,
> >
> > > Mine works without any problem with CW + LPC (don't need H-JTAG).
> > Works
> > > with CW + STM32 too, but after some time of use Windows XP give me a
> > blue
> > > screen.
> >
> > That's for our extra-special-value customers.
> >
> > --
> > Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
> > CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
Reply by ●February 20, 20082008-02-20
Nothing more than I said before, that we didn't receive that from your
e-mail address, you sent it from another domain.
--
Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
> -----Original Message-----
> From: l... [mailto:l...] On
> Behalf Of jsmaiabr
> Sent: 19 February 2008 17:15
> To: l...
> Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> wiggler problem
> What you say now?
>
> -------Original Message-------
>
> From: license
> Date: 14/1/2008 05:54:45
> To: Maia
> Subject: Re: CrossWorks for ARM 1.7 Evaluation Registration
>
> 026ZJ-17N1P-NUTXU-C9FIE-JRGC6-F7FKM-MQXMX-HK2QA-PHGCI-REH5V+
> F4XV4-KNDL7-QN1W6-1KK0P-O8O2S-01CAD-75EXZ-OH31L-WAO7E-ZVN16
> > I would like to evaluate CrossWorks for 30 days. My evaluation
> > registration key is:
> > 12JX7-6JW84-JMUAV-3LORI-BZLWF-T4IAN-SC4RF-Z0MWF-XOBUS-X5R60+
> > JT9PI-D3TMN-DJIDY-RHPHL-TC1HL-R5Q3X-6JFZF-4UP4Y-B7T52-MWC4A I
> > understand that this is for evaluation only and must not be used for
> > commercial purposes. Thanks.
> >
> -------Original Message-------
>
> From: Paul Curtis
> Date: 19/2/2008 13:46:37
> To: l...
> Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> wiggler
> problem
>
> Ok, I just wondered how you're still using CrossWorks when you
> evaluated for
> 30 days in December 2006? Unless I'm mistaken, of course, I don't see
> another activation from your address. That's all.
>
> > -----Original Message-----
> > From: l... [mailto:l...] On
> > Behalf Of jsmaiabr
> > Sent: 19 February 2008 16:44
> > To: l...
> > Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> > wiggler problem
> >
> > Sorry, I don't understand. May you be more clear?
> > Regards,
> > Maia
>
> >
> > -------Original Message-------
> >
> > From: Paul Curtis
> > Date: 19/2/2008 09:09:55
> > To: l...
> > Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> > wiggler
> > problem
> >
> > Hi,
> >
> > > Mine works without any problem with CW + LPC (don't need H-JTAG).
> > Works
> > > with CW + STM32 too, but after some time of use Windows XP give me
> a
> > blue
> > > screen.
> >
> > That's for our extra-special-value customers.
> >
> > --
> > Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
> > CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
e-mail address, you sent it from another domain.
--
Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
> -----Original Message-----
> From: l... [mailto:l...] On
> Behalf Of jsmaiabr
> Sent: 19 February 2008 17:15
> To: l...
> Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> wiggler problem
> What you say now?
>
> -------Original Message-------
>
> From: license
> Date: 14/1/2008 05:54:45
> To: Maia
> Subject: Re: CrossWorks for ARM 1.7 Evaluation Registration
>
> 026ZJ-17N1P-NUTXU-C9FIE-JRGC6-F7FKM-MQXMX-HK2QA-PHGCI-REH5V+
> F4XV4-KNDL7-QN1W6-1KK0P-O8O2S-01CAD-75EXZ-OH31L-WAO7E-ZVN16
> > I would like to evaluate CrossWorks for 30 days. My evaluation
> > registration key is:
> > 12JX7-6JW84-JMUAV-3LORI-BZLWF-T4IAN-SC4RF-Z0MWF-XOBUS-X5R60+
> > JT9PI-D3TMN-DJIDY-RHPHL-TC1HL-R5Q3X-6JFZF-4UP4Y-B7T52-MWC4A I
> > understand that this is for evaluation only and must not be used for
> > commercial purposes. Thanks.
> >
> -------Original Message-------
>
> From: Paul Curtis
> Date: 19/2/2008 13:46:37
> To: l...
> Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> wiggler
> problem
>
> Ok, I just wondered how you're still using CrossWorks when you
> evaluated for
> 30 days in December 2006? Unless I'm mistaken, of course, I don't see
> another activation from your address. That's all.
>
> > -----Original Message-----
> > From: l... [mailto:l...] On
> > Behalf Of jsmaiabr
> > Sent: 19 February 2008 16:44
> > To: l...
> > Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> > wiggler problem
> >
> > Sorry, I don't understand. May you be more clear?
> > Regards,
> > Maia
>
> >
> > -------Original Message-------
> >
> > From: Paul Curtis
> > Date: 19/2/2008 09:09:55
> > To: l...
> > Subject: RE: [lpc2000] Re: INTERESTING Rowley Crossworks 1.7 - jtag
> > wiggler
> > problem
> >
> > Hi,
> >
> > > Mine works without any problem with CW + LPC (don't need H-JTAG).
> > Works
> > > with CW + STM32 too, but after some time of use Windows XP give me
> a
> > blue
> > > screen.
> >
> > That's for our extra-special-value customers.
> >
> > --
> > Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk
> > CrossWorks for ARM, MSP430, AVR, MAXQ, and now Cortex-M3 processors
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
