Hi
Has anyone try using the LPC2000 Flash Utility V2.2.3 with VISTA.
I cannot get it to work with LPC2294 Board and the USB Virtual Port.
All drivers being loaded OK.
Regards
Jean-Jacques
Phillips Fash utility
Started by ●August 7, 2008
Reply by ●August 8, 20082008-08-08
Greetings:
You may wish to take a look at "Flash Magic" which is sponsored by
NXP and I believe is the replacement for the Philips Flash Utility. Here
are quotes from the Flash Magic Tool website which suggest Vista
compatibility:
* "Version 4.28* | Release Notes"
"Windows 98/ME/2000/XP/Vista"
"Flash Magic works on any versions of Windows, except Windows
95. 10Mb of disk space is required."
It was a free download when I got it from the following site:
http://www.flashmagictool.com/
Hope this helps!
--
Best Regards,
Tom Alldread
t...@telus.net
You may wish to take a look at "Flash Magic" which is sponsored by
NXP and I believe is the replacement for the Philips Flash Utility. Here
are quotes from the Flash Magic Tool website which suggest Vista
compatibility:
* "Version 4.28* | Release Notes"
"Windows 98/ME/2000/XP/Vista"
"Flash Magic works on any versions of Windows, except Windows
95. 10Mb of disk space is required."
It was a free download when I got it from the following site:
http://www.flashmagictool.com/
Hope this helps!
--
Best Regards,
Tom Alldread
t...@telus.net
Reply by ●August 8, 20082008-08-08
I don't use Vista as it is all show but not an efficient operating system.
However, maybe for you this one works:
http://www.flashmagictool.com/download.html&d=FlashMagic.exe
Free for non-commercial use. They claim it runs well under Vista.
http://www.flashmagictool.com/download.html&d=FlashMagic.exe
Free for non-commercial use. They claim it runs well under Vista.
Reply by ●August 8, 20082008-08-08
I have used flash magic and written programs using the flash magic API and it
works well under vista,xp,and win98. The
API turned out to be very useful.
-Zach
----- Original Message -----
From: j
To: l...
Sent: Friday, August 08, 2008 4:59 PM
Subject: [lpc2000] Re:Phillips Fash utility
I don't use Vista as it is all show but not an efficient operating system. However, maybe for you this one works:
http://www.flashmagictool.com/download.html&d=FlashMagic.exe
Free for non-commercial use. They claim it runs well under Vista.
API turned out to be very useful.
-Zach
----- Original Message -----
From: j
To: l...
Sent: Friday, August 08, 2008 4:59 PM
Subject: [lpc2000] Re:Phillips Fash utility
I don't use Vista as it is all show but not an efficient operating system. However, maybe for you this one works:
http://www.flashmagictool.com/download.html&d=FlashMagic.exe
Free for non-commercial use. They claim it runs well under Vista.
Reply by ●August 10, 20082008-08-10