lpc2104 not executing code in flash

Started by manikandan palaniappan November 2, 2004
hi,
i am using tinyarm lpc2106 from ramtek.i download the example from donotronics mb40_examples.zip(Dontronics - TinyARM DIP40/50 with Philips LPC2106/2129 ... websitefor -www.dontronics.com/pasat.html)for lpc2106.i am using IAR EmbeddedWorkBench version 4.10A for producing intel hex file and downloading code into flash Using philips ISP.program executed successfully.we also having lpc2104 board and i want to do the same example by changing project option in target to lpc2104 chip,compiled and getting intel hex output without any errors.when i downloaded the program into flash it was downloaded successfully ,but it is not executing.i am using uart example to transmit the character typed from keyboard.is there any other setting to be changed?i also need uart example program for lpc2104.

Thanks in advance,
pl.manikandan ---------------------------------



An Engineer's Guide to the LPC2100 Series


Are you removing (adding?) the jumper to disable ISP mode?

Richard

--- In , manikandan palaniappan
<aravindar_manikandan@y...> wrote:
> hi,
> i am using tinyarm lpc2106 from ramtek.i download the example from
donotronics mb40_examples.zip(Dontronics - TinyARM DIP40/50 with
Philips LPC2106/2129 ... websitefor -www.dontronics.com/pasat.html)
for lpc2106.i am using IAR EmbeddedWorkBench version 4.10A for
producing intel hex file and downloading code into flash Using
philips ISP.program executed successfully.we also having lpc2104
board and i want to do the same example by changing project option in
target to lpc2104 chip,compiled and getting intel hex output without
any errors.when i downloaded the program into flash it was downloaded
successfully ,but it is not executing.i am using uart example to
transmit the character typed from keyboard.is there any other setting
to be changed?i also need uart example program for lpc2104.
>
> Thanks in advance,
> pl.manikandan > ---------------------------------
>




hi,
i am putting jumper at p0.14 to low to enter into bootloadermode and upload program into flash.then i remove jumper to make p0.14 to high and reset to execute program,but it won't execute

thanks in advance,
mani

Richard <> wrote:

Are you removing (adding?) the jumper to disable ISP mode?

Richard

--- In , manikandan palaniappan
<aravindar_manikandan@y...> wrote:
> hi,
> i am using tinyarm lpc2106 from ramtek.i download the example from
donotronics mb40_examples.zip(Dontronics - TinyARM DIP40/50 with
Philips LPC2106/2129 ... websitefor -www.dontronics.com/pasat.html)
for lpc2106.i am using IAR EmbeddedWorkBench version 4.10A for
producing intel hex file and downloading code into flash Using
philips ISP.program executed successfully.we also having lpc2104
board and i want to do the same example by changing project option in
target to lpc2104 chip,compiled and getting intel hex output without
any errors.when i downloaded the program into flash it was downloaded
successfully ,but it is not executing.i am using uart example to
transmit the character typed from keyboard.is there any other setting
to be changed?i also need uart example program for lpc2104.
>
> Thanks in advance,
> pl.manikandan > ---------------------------------
>

Yahoo! Groups Sponsor
Get unlimited calls to

U.S./Canada ---------------------------------
Yahoo! Groups Links

To
---------------------------------