--- In l..., Raju N wrote:
>
> Any body tried the j-link debugger with(choices for compilers) GNU arm GCC
> ,Keil IDE(with all compilers which keil supports) and Cross works,Open OCD
> only?
>
> On Fri, Mar 12, 2010 at 3:29 PM, kevin_townsend2 wrote:
>
> >
> >
> > > Yes, i got information that most of them are using J-link debugger.Will
> > it
> > > support for ARM7 and Cortex,ARM11 WITH ALL compilers?
> >
Come on,
as Kevin pointed out, any compiler besides plain GNU that you would purchase
costs a multiple of J-Link. If you are "acquiring" the compilers other than a
legal license, you should not ask for support.
So, you ask whether a $300 tool will support Keil (several k$ or CrossWorks
>1k$), yes it does and it is penny wise and pound foolish to make a decision
based on this fact.
Nevertheless, going with Keil I would also go with ULink2 because this
combination has been tested in every detail. I have a J-Link and it works with
Keil and IAR that's for sure. There are Application Notes on the segger.com
website about using J-Link with GNU, there is a document on the Rowley website
how to use J-Link with Crossworks. Now, please go and purchase one and try it
out yourself.
Bob
GOOD debugger which works with all the compilers and LPC (ARM7 ,ARM9 AND ARM11)
Started by ●March 11, 2010
Reply by ●March 12, 20102010-03-12
Reply by ●March 12, 20102010-03-12
I checked their website and it is true, Segger is the Swiss-army knife of
debuggers. This is something that has happen in the last 2 years. That ARM11
project started 3 years ago and ended 9 months later.
-----Original Message-----
From: l... [mailto:l...]On Behalf Of
42Bastian
Sent: Thursday, March 11, 2010 11:18 PM
To: l...
Subject: Re: [lpc2000] GOOD debugger which works with all the compilers
and LPC (ARM7 ,ARM9 AND ARM11)
Michael Freeman schrieb:
> What do you need ARM11 support for?? You will not find a debugger that
works
> with the ARM11 and all compilers. Also any debugger that works with
ARM11 is
> $$$$$$. We looked into some for the iMX31, most were stand alone units
with
Nope. J-Link works with ARM11, I myself use IAR with a Phytec i.MX35 and
it just works fine.
And thats not $$$$$$, only $$$ :-)
--
42Bastian
+
| http://www.sciopta.com
| Fastest direct message passing kernel.
| IEC61508 certified.
+
debuggers. This is something that has happen in the last 2 years. That ARM11
project started 3 years ago and ended 9 months later.
-----Original Message-----
From: l... [mailto:l...]On Behalf Of
42Bastian
Sent: Thursday, March 11, 2010 11:18 PM
To: l...
Subject: Re: [lpc2000] GOOD debugger which works with all the compilers
and LPC (ARM7 ,ARM9 AND ARM11)
Michael Freeman schrieb:
> What do you need ARM11 support for?? You will not find a debugger that
works
> with the ARM11 and all compilers. Also any debugger that works with
ARM11 is
> $$$$$$. We looked into some for the iMX31, most were stand alone units
with
Nope. J-Link works with ARM11, I myself use IAR with a Phytec i.MX35 and
it just works fine.
And thats not $$$$$$, only $$$ :-)
--
42Bastian
+
| http://www.sciopta.com
| Fastest direct message passing kernel.
| IEC61508 certified.
+