Thanks for pointing this out. The credentials were temporarily disabled.
You should be able to get in now. The link should be
ftp::/ftp.inclinesoftworks.com if using IE, or just ftp.inclinesoftworks.com
<ftp://ftp.inclinesoftworks.com/> if using ftp.com
<ftp://ftp.com/>
command line
Dan
_____
From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf Of
Rock Dubois
Sent: Thursday, September 15, 2005 8:30 PM
To: lpc2000@lpc2...
Subject: RE: [lpc2000] Re: LPC2138 and FreeRTOS
Dan,
I tried to download it from your ftp site but it didn't let me in. I
tried
again but still not able to login.
Yvon.
Dan Beadle <dan.beadle@dan....> wrote:
I have just posted FreeRTOS Version 3.20 for IAR/ARM on my website
ftp://inclinesoftworks.com <ftp://inclinesoftworks.com/> Use UserName
incline9_cust and pw freertos.
This version of FreeRTOS has been adapted to IAR/ARM. (Using Version
4.30a of WARM). It works with MCB2100 Eval Board. It is adapted from
the Keil and SAM versions of the RTOS.
If you have questions, you can contact me..
Dan Beadle
_____
From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf
Of charlesgrenz
Sent: Wednesday, August 24, 2005 3:39 PM
To: lpc2000@lpc2...
Subject: [lpc2000] Re: LPC2138 and FreeRTOS
Hi Dan,
Did you find the port from gcc to IAR difficult? I am using IAR and
I was looking at the LPC2106 gcc version and porting that to the IAR
2106.
Thanks,
Charles
--- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...> wrote:
> I did an early port of this to the IAR tool chain.
It took a while to
> get my mind around all the files, but, in truth, it is quite small and
> easy to work with. The documentation is only available online. I
would
> prefer a PDF to a web page, but that is a nit.
>
> I am using FreeRTOS on several projects. I like the following
features:
> - Lean (small footprint, only the features I need.)
>
> - Evolving (almost too many code drops. I am giving up on
> chasing changes)
>
> - Tractable. I got my mind around the entire code base,
because
> it is so small
>
> In the past, deeply embedded projects often would not use any RTOS.
This
> brings true tasking to my systems without the
overhead and cost of
WinCE
> or Linux. I considered uCOS, but this package does
all that I need
from
> uCOS. And the price is right.
>
> _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
Behalf
> Of Peter Homann
> Sent: Wednesday, August 24, 2005 5:15 AM
> To: lpc2000@lpc2...
> Subject: [lpc2000] LPC2138 and FreeRTOS
>
> Hi,
>
> I'm looking at using FreeRTOS on a LPC2138 based project. Does anyone
> have any opinions, tips or experiences they could share on how
> successful this combination is.
>
> Thanks in advance.
>
> Cheers,
>
> Peter.
> --
> ------------------------------
> Web: www.homanndesigns.com
> email: homann@h...
> Phone: +61 421 601 665
> www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
> www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
>
> _____
>
> > .
>
> _____
>
>
SPONSORED LINKS
Microcontrollers
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microcontroller>
&k=Microcontrollers&w1=Microcontroller
s&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w5=
8085+microprocessor&c=5&s0&.sig=OPqm0ilH6VyGn-geZ0nNwA>
Microprocessor
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microcontrollers&>
&k=Microprocessor&w1=Microcontrollers&
w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w5
85+microprocessor&c=5&s0&.sig93hF7rArBsrPQJltQ_w>
Intel microprocessors
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Intel+microprocessors&w1=Microcontr>
&k=Intel+microprocessors&w1=Microcontr
ollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroller
s&w585+microprocessor&c=5&s0&.sigrTtKaQUw-Vd0BgTdDmw>
Pic microcontrollers
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Pic+microcontrollers&w1=Microcontro>
&k=Pic+microcontrollers&w1=Microcontro
llers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers
&w585+microprocessor&c=5&s0&.sig=iYT6za1gT3-VT1hwIylDpw>
8085 microprocessor
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k85+microprocessor&w1=Microcontrol>
&k85+microprocessor&w1=Microcontrol
lers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&
w585+microprocessor&c=5&s0&.sig=PhYMBsCkQptYbazQFyNujQ
_____
> .
_____
---------------------------------
> Terms of Service.
_____
LPC2138 and FreeRTOS
Started by ●August 24, 2005
Reply by ●September 16, 20052005-09-16
Reply by ●September 16, 20052005-09-16
Dan,
Where can I get a copy of the Keil port of the rtos?
Thanks, Garrett
--- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...> wrote:
> Thanks for pointing this out. The credentials were temporarily
disabled.
> You should be able to get in now. The link should be
>
> ftp::/ftp.inclinesoftworks.com if using IE, or just
ftp.inclinesoftworks.com
> <ftp://ftp.inclinesoftworks.com/> if using ftp.com <ftp://ftp.com/>
> command line >
> Dan >
> _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
Behalf Of
> Rock Dubois
> Sent: Thursday, September 15, 2005 8:30 PM
> To: lpc2000@lpc2...
> Subject: RE: [lpc2000] Re: LPC2138 and FreeRTOS >
> Dan,
>
> I tried to download it from your ftp site but it didn't let me in.
I tried
> again but still not able to login.
>
> Yvon. > Dan Beadle <dan.beadle@i...> wrote:
> I have just posted FreeRTOS Version 3.20 for IAR/ARM on my website
> ftp://inclinesoftworks.com <ftp://inclinesoftworks.com/> Use
UserName
> incline9_cust and pw freertos. >
> This version of FreeRTOS has been adapted to IAR/ARM. (Using Version
> 4.30a of WARM). It works with MCB2100 Eval Board. It is adapted
from
> the Keil and SAM versions of the RTOS. >
> If you have questions, you can contact me..
>
> Dan Beadle >
> _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
Behalf
> Of charlesgrenz
> Sent: Wednesday, August 24, 2005 3:39 PM
> To: lpc2000@lpc2...
> Subject: [lpc2000] Re: LPC2138 and FreeRTOS >
> Hi Dan,
>
> Did you find the port from gcc to IAR difficult? I am using IAR
and
> I was looking at the LPC2106 gcc version and porting that to the IAR
> 2106.
>
> Thanks,
> Charles >
> --- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...>
wrote:
> > I did an early port of this to the IAR tool chain. It took a
while to
> > get my mind around all the files, but, in truth, it is quite
small and
> > easy to work with. The documentation is only available online. I
> would
> > prefer a PDF to a web page, but that is a nit.
> >
> >
> >
> > I am using FreeRTOS on several projects. I like the following
> features:
> >
> >
> >
> > - Lean (small footprint, only the features I need.)
> >
> > - Evolving (almost too many code drops. I am giving up on
> > chasing changes)
> >
> > - Tractable. I got my mind around the entire code base,
> because
> > it is so small
> >
> >
> >
> > In the past, deeply embedded projects often would not use any
RTOS.
> This
> > brings true tasking to my systems without the overhead and cost of
> WinCE
> > or Linux. I considered uCOS, but this package does all that I
need
> from
> > uCOS. And the price is right.
> >
> >
> >
> > _____
> >
> > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> Behalf
> > Of Peter Homann
> > Sent: Wednesday, August 24, 2005 5:15 AM
> > To: lpc2000@lpc2...
> > Subject: [lpc2000] LPC2138 and FreeRTOS
> >
> >
> >
> > Hi,
> >
> > I'm looking at using FreeRTOS on a LPC2138 based project. Does
anyone
> > have any opinions, tips or experiences they could share on how
> > successful this combination is.
> >
> > Thanks in advance.
> >
> > Cheers,
> >
> > Peter.
> > --
> > ------------------------------
> > Web: www.homanndesigns.com
> > email: homann@h...
> > Phone: +61 421 601 665
> > www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
> > www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
> >
> >
> >
> > _____
> >
> > > .
> >
> >
> >
> > _____
> >
> >
> >
> > SPONSORED LINKS
>
> Microcontrollers
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads?
t=ms&k=Microcontrollers&w1=Microcontroller>
> &k=Microcontrollers&w1=Microcontroller
>
s&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w
5=
> 8085+microprocessor&c=5&s0&.sig=OPqm0ilH6VyGn-geZ0nNwA>
>
> Microprocessor
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads?
t=ms&k=Microprocessor&w1=Microcontrollers&>
> &k=Microprocessor&w1=Microcontrollers&
>
w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w5=
80
> 85+microprocessor&c=5&s0&.sig93hF7rArBsrPQJltQ_w>
>
> Intel microprocessors
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads?
t=ms&k=Intel+microprocessors&w1=Microcontr>
> &k=Intel+microprocessors&w1=Microcontr
>
ollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroll
er
> s&w585+microprocessor&c=5&s0&.sigrTtKaQUw-Vd0BgTdDmw>
>
> Pic microcontrollers
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads?
t=ms&k=Pic+microcontrollers&w1=Microcontro>
> &k=Pic+microcontrollers&w1=Microcontro
>
llers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrolle
rs
> &w585+microprocessor&c=5&s0&.sig=iYT6za1gT3-VT1hwIylDpw>
>
> 8085 microprocessor
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads?
t=ms&k85+microprocessor&w1=Microcontrol>
> &k85+microprocessor&w1=Microcontrol
>
lers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroller
s&
> w585+microprocessor&c=5&s0&.sig=PhYMBsCkQptYbazQFyNujQ > _____
>
> > . >
> _____ >
>
> ---------------------------------
> > Terms of Service. >
> _____ >
>
Where can I get a copy of the Keil port of the rtos?
Thanks, Garrett
--- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...> wrote:
> Thanks for pointing this out. The credentials were temporarily
disabled.
> You should be able to get in now. The link should be
>
> ftp::/ftp.inclinesoftworks.com if using IE, or just
ftp.inclinesoftworks.com
> <ftp://ftp.inclinesoftworks.com/> if using ftp.com <ftp://ftp.com/>
> command line >
> Dan >
> _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
Behalf Of
> Rock Dubois
> Sent: Thursday, September 15, 2005 8:30 PM
> To: lpc2000@lpc2...
> Subject: RE: [lpc2000] Re: LPC2138 and FreeRTOS >
> Dan,
>
> I tried to download it from your ftp site but it didn't let me in.
I tried
> again but still not able to login.
>
> Yvon. > Dan Beadle <dan.beadle@i...> wrote:
> I have just posted FreeRTOS Version 3.20 for IAR/ARM on my website
> ftp://inclinesoftworks.com <ftp://inclinesoftworks.com/> Use
UserName
> incline9_cust and pw freertos. >
> This version of FreeRTOS has been adapted to IAR/ARM. (Using Version
> 4.30a of WARM). It works with MCB2100 Eval Board. It is adapted
from
> the Keil and SAM versions of the RTOS. >
> If you have questions, you can contact me..
>
> Dan Beadle >
> _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
Behalf
> Of charlesgrenz
> Sent: Wednesday, August 24, 2005 3:39 PM
> To: lpc2000@lpc2...
> Subject: [lpc2000] Re: LPC2138 and FreeRTOS >
> Hi Dan,
>
> Did you find the port from gcc to IAR difficult? I am using IAR
and
> I was looking at the LPC2106 gcc version and porting that to the IAR
> 2106.
>
> Thanks,
> Charles >
> --- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...>
wrote:
> > I did an early port of this to the IAR tool chain. It took a
while to
> > get my mind around all the files, but, in truth, it is quite
small and
> > easy to work with. The documentation is only available online. I
> would
> > prefer a PDF to a web page, but that is a nit.
> >
> >
> >
> > I am using FreeRTOS on several projects. I like the following
> features:
> >
> >
> >
> > - Lean (small footprint, only the features I need.)
> >
> > - Evolving (almost too many code drops. I am giving up on
> > chasing changes)
> >
> > - Tractable. I got my mind around the entire code base,
> because
> > it is so small
> >
> >
> >
> > In the past, deeply embedded projects often would not use any
RTOS.
> This
> > brings true tasking to my systems without the overhead and cost of
> WinCE
> > or Linux. I considered uCOS, but this package does all that I
need
> from
> > uCOS. And the price is right.
> >
> >
> >
> > _____
> >
> > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> Behalf
> > Of Peter Homann
> > Sent: Wednesday, August 24, 2005 5:15 AM
> > To: lpc2000@lpc2...
> > Subject: [lpc2000] LPC2138 and FreeRTOS
> >
> >
> >
> > Hi,
> >
> > I'm looking at using FreeRTOS on a LPC2138 based project. Does
anyone
> > have any opinions, tips or experiences they could share on how
> > successful this combination is.
> >
> > Thanks in advance.
> >
> > Cheers,
> >
> > Peter.
> > --
> > ------------------------------
> > Web: www.homanndesigns.com
> > email: homann@h...
> > Phone: +61 421 601 665
> > www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
> > www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
> >
> >
> >
> > _____
> >
> > > .
> >
> >
> >
> > _____
> >
> >
> >
> > SPONSORED LINKS
>
> Microcontrollers
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads?
t=ms&k=Microcontrollers&w1=Microcontroller>
> &k=Microcontrollers&w1=Microcontroller
>
s&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w
5=
> 8085+microprocessor&c=5&s0&.sig=OPqm0ilH6VyGn-geZ0nNwA>
>
> Microprocessor
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads?
t=ms&k=Microprocessor&w1=Microcontrollers&>
> &k=Microprocessor&w1=Microcontrollers&
>
w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w5=
80
> 85+microprocessor&c=5&s0&.sig93hF7rArBsrPQJltQ_w>
>
> Intel microprocessors
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads?
t=ms&k=Intel+microprocessors&w1=Microcontr>
> &k=Intel+microprocessors&w1=Microcontr
>
ollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroll
er
> s&w585+microprocessor&c=5&s0&.sigrTtKaQUw-Vd0BgTdDmw>
>
> Pic microcontrollers
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads?
t=ms&k=Pic+microcontrollers&w1=Microcontro>
> &k=Pic+microcontrollers&w1=Microcontro
>
llers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrolle
rs
> &w585+microprocessor&c=5&s0&.sig=iYT6za1gT3-VT1hwIylDpw>
>
> 8085 microprocessor
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads?
t=ms&k85+microprocessor&w1=Microcontrol>
> &k85+microprocessor&w1=Microcontrol
>
lers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroller
s&
> w585+microprocessor&c=5&s0&.sig=PhYMBsCkQptYbazQFyNujQ > _____
>
> > . >
> _____ >
>
> ---------------------------------
> > Terms of Service. >
> _____ >
>
Reply by ●September 16, 20052005-09-16
> Where can I get a copy of the Keil port of the rtos?
All the official ports are in the main download. See the Keil port doc
page (http://www.freertos.org/portlpckeil.html) for information on the
Keil port,and the source code organisation page
(http://www.freertos.org/a00017.html) for information on understanding
the files in the download (of which only a few are required for each
port and the rest can be deleted).
These are directly links so you will not see the menu frame. If you
want to see the menu frame go directly to http://www.FreeRTOS.org
Regards.
All the official ports are in the main download. See the Keil port doc
page (http://www.freertos.org/portlpckeil.html) for information on the
Keil port,and the source code organisation page
(http://www.freertos.org/a00017.html) for information on understanding
the files in the download (of which only a few are required for each
port and the rest can be deleted).
These are directly links so you will not see the menu frame. If you
want to see the menu frame go directly to http://www.FreeRTOS.org
Regards.
Reply by ●September 19, 20052005-09-19
Go to www.freertos.org <http://www.freertos.org/> . Richard has a
wide
variety of ports, including the Keil MB2100 board. I am trying to get
him to post the IAR port to the LPC (there is difference in the way the
assembly language is done between Keil and IAR - Keil has a better asm
macro). Comments to him will help.
Freertos is supported on everything from PIC to LPC to PC.
Dan _____
From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf
Of lehighuboy
Sent: Friday, September 16, 2005 8:54 AM
To: lpc2000@lpc2...
Subject: [lpc2000] Re: LPC2138 and FreeRTOS
Dan,
Where can I get a copy of the Keil port of the rtos?
Thanks, Garrett
--- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...> wrote:
> Thanks for pointing this out. The credentials were temporarily
disabled.
> You should be able to get in now. The link should be
>
> ftp::/ftp.inclinesoftworks.com if using IE, or just
ftp.inclinesoftworks.com
> <ftp://ftp.inclinesoftworks.com/> if using ftp.com <ftp://ftp.com/>
> command line >
> Dan >
> _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
Behalf Of
> Rock Dubois
> Sent: Thursday, September 15, 2005 8:30 PM
> To: lpc2000@lpc2...
> Subject: RE: [lpc2000] Re: LPC2138 and FreeRTOS >
> Dan,
>
> I tried to download it from your ftp site but it didn't let me in.
I tried
> again but still not able to login.
>
> Yvon. > Dan Beadle <dan.beadle@i...> wrote:
> I have just posted FreeRTOS Version 3.20 for IAR/ARM on my website
> ftp://inclinesoftworks.com <ftp://inclinesoftworks.com/> Use
UserName
> incline9_cust and pw freertos. >
> This version of FreeRTOS has been adapted to IAR/ARM. (Using Version
> 4.30a of WARM). It works with MCB2100 Eval Board. It is adapted
from
> the Keil and SAM versions of the RTOS. >
> If you have questions, you can contact me..
>
> Dan Beadle >
> _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
Behalf
> Of charlesgrenz
> Sent: Wednesday, August 24, 2005 3:39 PM
> To: lpc2000@lpc2...
> Subject: [lpc2000] Re: LPC2138 and FreeRTOS >
> Hi Dan,
>
> Did you find the port from gcc to IAR difficult? I am using IAR
and
> I was looking at the LPC2106 gcc version and porting that to the IAR
> 2106.
>
> Thanks,
> Charles >
> --- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...>
wrote:
> > I did an early port of this to the IAR tool chain. It took a
while to
> > get my mind around all the files, but, in truth, it is quite
small and
> > easy to work with. The documentation is only available online. I
> would
> > prefer a PDF to a web page, but that is a nit.
> >
> >
> >
> > I am using FreeRTOS on several projects. I like the following
> features:
> >
> >
> >
> > - Lean (small footprint, only the features I need.)
> >
> > - Evolving (almost too many code drops. I am giving up on
> > chasing changes)
> >
> > - Tractable. I got my mind around the entire code base,
> because
> > it is so small
> >
> >
> >
> > In the past, deeply embedded projects often would not use any
RTOS.
> This
> > brings true tasking to my systems without the overhead and cost of
> WinCE
> > or Linux. I considered uCOS, but this package does all that I
need
> from
> > uCOS. And the price is right.
> >
> >
> >
> > _____
> >
> > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> Behalf
> > Of Peter Homann
> > Sent: Wednesday, August 24, 2005 5:15 AM
> > To: lpc2000@lpc2...
> > Subject: [lpc2000] LPC2138 and FreeRTOS
> >
> >
> >
> > Hi,
> >
> > I'm looking at using FreeRTOS on a LPC2138 based project. Does
anyone
> > have any opinions, tips or experiences they could share on how
> > successful this combination is.
> >
> > Thanks in advance.
> >
> > Cheers,
> >
> > Peter.
> > --
> > ------------------------------
> > Web: www.homanndesigns.com
> > email: homann@h...
> > Phone: +61 421 601 665
> > www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
> > www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
> >
> >
> >
> > _____
> >
> > > .
> >
> >
> >
> > _____
> >
> >
> >
> > SPONSORED LINKS
>
> Microcontrollers
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads?
t=ms&k=Microcontrollers&w1=Microcontroller>
> &k=Microcontrollers&w1=Microcontroller
>
s&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w
5=
> 8085+microprocessor&c=5&s0&.sig=OPqm0ilH6VyGn-geZ0nNwA>
>
> Microprocessor
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads?
t=ms&k=Microprocessor&w1=Microcontrollers&>
> &k=Microprocessor&w1=Microcontrollers&
>
w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w5=
80
> 85+microprocessor&c=5&s0&.sig93hF7rArBsrPQJltQ_w>
>
> Intel microprocessors
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads?
t=ms&k=Intel+microprocessors&w1=Microcontr>
> &k=Intel+microprocessors&w1=Microcontr
>
ollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroll
er
> s&w585+microprocessor&c=5&s0&.sigrTtKaQUw-Vd0BgTdDmw>
>
> Pic microcontrollers
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads?
t=ms&k=Pic+microcontrollers&w1=Microcontro>
> &k=Pic+microcontrollers&w1=Microcontro
>
llers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrolle
rs
> &w585+microprocessor&c=5&s0&.sig=iYT6za1gT3-VT1hwIylDpw>
>
> 8085 microprocessor
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads?
t=ms&k85+microprocessor&w1=Microcontrol>
> &k85+microprocessor&w1=Microcontrol
>
lers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroller
s&
> w585+microprocessor&c=5&s0&.sig=PhYMBsCkQptYbazQFyNujQ > _____
>
> > . >
> _____ >
>
> ---------------------------------
> > Terms of Service. >
> _____ >
>
SPONSORED LINKS
Microprocessor
<http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microprocessor&w2
=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=4&s=9
3&.sig=tsVC-J9hJ5qyXg0WPR0l6g>
Microcontrollers
<http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microprocessor&
w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=4&s
&.sig=DvJVNqC_pqRTm8Xq01nxwg>
Pic microcontrollers
<http://groups.yahoo.com/gads?t=ms&k=Pic+microcontrollers&w1=Microproces
sor&w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c
=4&s&.sig=TpkoX4KofDJ7c6LyBvUqVQ>
8051 microprocessor
<http://groups.yahoo.com/gads?t=ms&k51+microprocessor&w1=Microprocess
or&w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=
4&s&.sig=1Ipf1Fjfbd_HVIlekkDP-A
_____
> .
_____
variety of ports, including the Keil MB2100 board. I am trying to get
him to post the IAR port to the LPC (there is difference in the way the
assembly language is done between Keil and IAR - Keil has a better asm
macro). Comments to him will help.
Freertos is supported on everything from PIC to LPC to PC.
Dan _____
From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf
Of lehighuboy
Sent: Friday, September 16, 2005 8:54 AM
To: lpc2000@lpc2...
Subject: [lpc2000] Re: LPC2138 and FreeRTOS
Dan,
Where can I get a copy of the Keil port of the rtos?
Thanks, Garrett
--- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...> wrote:
> Thanks for pointing this out. The credentials were temporarily
disabled.
> You should be able to get in now. The link should be
>
> ftp::/ftp.inclinesoftworks.com if using IE, or just
ftp.inclinesoftworks.com
> <ftp://ftp.inclinesoftworks.com/> if using ftp.com <ftp://ftp.com/>
> command line >
> Dan >
> _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
Behalf Of
> Rock Dubois
> Sent: Thursday, September 15, 2005 8:30 PM
> To: lpc2000@lpc2...
> Subject: RE: [lpc2000] Re: LPC2138 and FreeRTOS >
> Dan,
>
> I tried to download it from your ftp site but it didn't let me in.
I tried
> again but still not able to login.
>
> Yvon. > Dan Beadle <dan.beadle@i...> wrote:
> I have just posted FreeRTOS Version 3.20 for IAR/ARM on my website
> ftp://inclinesoftworks.com <ftp://inclinesoftworks.com/> Use
UserName
> incline9_cust and pw freertos. >
> This version of FreeRTOS has been adapted to IAR/ARM. (Using Version
> 4.30a of WARM). It works with MCB2100 Eval Board. It is adapted
from
> the Keil and SAM versions of the RTOS. >
> If you have questions, you can contact me..
>
> Dan Beadle >
> _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
Behalf
> Of charlesgrenz
> Sent: Wednesday, August 24, 2005 3:39 PM
> To: lpc2000@lpc2...
> Subject: [lpc2000] Re: LPC2138 and FreeRTOS >
> Hi Dan,
>
> Did you find the port from gcc to IAR difficult? I am using IAR
and
> I was looking at the LPC2106 gcc version and porting that to the IAR
> 2106.
>
> Thanks,
> Charles >
> --- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...>
wrote:
> > I did an early port of this to the IAR tool chain. It took a
while to
> > get my mind around all the files, but, in truth, it is quite
small and
> > easy to work with. The documentation is only available online. I
> would
> > prefer a PDF to a web page, but that is a nit.
> >
> >
> >
> > I am using FreeRTOS on several projects. I like the following
> features:
> >
> >
> >
> > - Lean (small footprint, only the features I need.)
> >
> > - Evolving (almost too many code drops. I am giving up on
> > chasing changes)
> >
> > - Tractable. I got my mind around the entire code base,
> because
> > it is so small
> >
> >
> >
> > In the past, deeply embedded projects often would not use any
RTOS.
> This
> > brings true tasking to my systems without the overhead and cost of
> WinCE
> > or Linux. I considered uCOS, but this package does all that I
need
> from
> > uCOS. And the price is right.
> >
> >
> >
> > _____
> >
> > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> Behalf
> > Of Peter Homann
> > Sent: Wednesday, August 24, 2005 5:15 AM
> > To: lpc2000@lpc2...
> > Subject: [lpc2000] LPC2138 and FreeRTOS
> >
> >
> >
> > Hi,
> >
> > I'm looking at using FreeRTOS on a LPC2138 based project. Does
anyone
> > have any opinions, tips or experiences they could share on how
> > successful this combination is.
> >
> > Thanks in advance.
> >
> > Cheers,
> >
> > Peter.
> > --
> > ------------------------------
> > Web: www.homanndesigns.com
> > email: homann@h...
> > Phone: +61 421 601 665
> > www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
> > www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
> >
> >
> >
> > _____
> >
> > > .
> >
> >
> >
> > _____
> >
> >
> >
> > SPONSORED LINKS
>
> Microcontrollers
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads?
t=ms&k=Microcontrollers&w1=Microcontroller>
> &k=Microcontrollers&w1=Microcontroller
>
s&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w
5=
> 8085+microprocessor&c=5&s0&.sig=OPqm0ilH6VyGn-geZ0nNwA>
>
> Microprocessor
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads?
t=ms&k=Microprocessor&w1=Microcontrollers&>
> &k=Microprocessor&w1=Microcontrollers&
>
w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w5=
80
> 85+microprocessor&c=5&s0&.sig93hF7rArBsrPQJltQ_w>
>
> Intel microprocessors
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads?
t=ms&k=Intel+microprocessors&w1=Microcontr>
> &k=Intel+microprocessors&w1=Microcontr
>
ollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroll
er
> s&w585+microprocessor&c=5&s0&.sigrTtKaQUw-Vd0BgTdDmw>
>
> Pic microcontrollers
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads?
t=ms&k=Pic+microcontrollers&w1=Microcontro>
> &k=Pic+microcontrollers&w1=Microcontro
>
llers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrolle
rs
> &w585+microprocessor&c=5&s0&.sig=iYT6za1gT3-VT1hwIylDpw>
>
> 8085 microprocessor
> <http://groups.yahoo.com/gads?t=ms
> <http://groups.yahoo.com/gads?
t=ms&k85+microprocessor&w1=Microcontrol>
> &k85+microprocessor&w1=Microcontrol
>
lers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroller
s&
> w585+microprocessor&c=5&s0&.sig=PhYMBsCkQptYbazQFyNujQ > _____
>
> > . >
> _____ >
>
> ---------------------------------
> > Terms of Service. >
> _____ >
>
SPONSORED LINKS
Microprocessor
<http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microprocessor&w2
=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=4&s=9
3&.sig=tsVC-J9hJ5qyXg0WPR0l6g>
Microcontrollers
<http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microprocessor&
w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=4&s
&.sig=DvJVNqC_pqRTm8Xq01nxwg>
Pic microcontrollers
<http://groups.yahoo.com/gads?t=ms&k=Pic+microcontrollers&w1=Microproces
sor&w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c
=4&s&.sig=TpkoX4KofDJ7c6LyBvUqVQ>
8051 microprocessor
<http://groups.yahoo.com/gads?t=ms&k51+microprocessor&w1=Microprocess
or&w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=
4&s&.sig=1Ipf1Fjfbd_HVIlekkDP-A
_____
> .
_____
Reply by ●September 23, 20052005-09-23
> Go to www.freertos.org <http://www.freertos.org/> . Richard has a
wide
> variety of ports, including the Keil MB2100 board. I am trying to get
> him to post the IAR port to the LPC (there is difference in the way the
> assembly language is done between Keil and IAR - Keil has a better asm
> macro). Comments to him will help.
>
Dan,
I've just uploaded FreeRTOS V3.2.2. This adds a supported IAR LPC2129 port.
Converting to an LPC2138 should not be a problem.
Regards,
Richard. http://www.FreeRTOS.org
>
>
> Freertos is supported on everything from PIC to LPC to PC. >
> Dan > _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf
> Of lehighuboy
> Sent: Friday, September 16, 2005 8:54 AM
> To: lpc2000@lpc2...
> Subject: [lpc2000] Re: LPC2138 and FreeRTOS >
> Dan,
>
> Where can I get a copy of the Keil port of the rtos?
>
> Thanks, Garrett
>
> --- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...> wrote:
> > Thanks for pointing this out. The credentials were temporarily
> disabled.
> > You should be able to get in now. The link should be
> >
> > ftp::/ftp.inclinesoftworks.com if using IE, or just
> ftp.inclinesoftworks.com
> > <ftp://ftp.inclinesoftworks.com/> if using ftp.com <ftp://ftp.com/>
> > command line
> >
> >
> >
> > Dan
> >
> >
> >
> > _____
> >
> > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> Behalf Of
> > Rock Dubois
> > Sent: Thursday, September 15, 2005 8:30 PM
> > To: lpc2000@lpc2...
> > Subject: RE: [lpc2000] Re: LPC2138 and FreeRTOS
> >
> >
> >
> > Dan,
> >
> > I tried to download it from your ftp site but it didn't let me in.
> I tried
> > again but still not able to login.
> >
> > Yvon.
> >
> >
> > Dan Beadle <dan.beadle@i...> wrote:
> > I have just posted FreeRTOS Version 3.20 for IAR/ARM on my website
> > ftp://inclinesoftworks.com <ftp://inclinesoftworks.com/> Use
> UserName
> > incline9_cust and pw freertos.
> >
> >
> >
> > This version of FreeRTOS has been adapted to IAR/ARM. (Using Version
> > 4.30a of WARM). It works with MCB2100 Eval Board. It is adapted
> from
> > the Keil and SAM versions of the RTOS.
> >
> >
> >
> > If you have questions, you can contact me..
> >
> > Dan Beadle
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > _____
> >
> > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> Behalf
> > Of charlesgrenz
> > Sent: Wednesday, August 24, 2005 3:39 PM
> > To: lpc2000@lpc2...
> > Subject: [lpc2000] Re: LPC2138 and FreeRTOS
> >
> >
> >
> > Hi Dan,
> >
> > Did you find the port from gcc to IAR difficult? I am using IAR
> and
> > I was looking at the LPC2106 gcc version and porting that to the IAR
> > 2106.
> >
> > Thanks,
> > Charles
> >
> >
> >
> > --- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...>
> wrote:
> > > I did an early port of this to the IAR tool chain. It took a
> while to
> > > get my mind around all the files, but, in truth, it is quite
> small and
> > > easy to work with. The documentation is only available online. I
> > would
> > > prefer a PDF to a web page, but that is a nit.
> > >
> > >
> > >
> > > I am using FreeRTOS on several projects. I like the following
> > features:
> > >
> > >
> > >
> > > - Lean (small footprint, only the features I need.)
> > >
> > > - Evolving (almost too many code drops. I am giving up on
> > > chasing changes)
> > >
> > > - Tractable. I got my mind around the entire code base,
> > because
> > > it is so small
> > >
> > >
> > >
> > > In the past, deeply embedded projects often would not use any
> RTOS.
> > This
> > > brings true tasking to my systems without the overhead and cost of
> > WinCE
> > > or Linux. I considered uCOS, but this package does all that I
> need
> > from
> > > uCOS. And the price is right.
> > >
> > >
> > >
> > > _____
> > >
> > > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> > Behalf
> > > Of Peter Homann
> > > Sent: Wednesday, August 24, 2005 5:15 AM
> > > To: lpc2000@lpc2...
> > > Subject: [lpc2000] LPC2138 and FreeRTOS
> > >
> > >
> > >
> > > Hi,
> > >
> > > I'm looking at using FreeRTOS on a LPC2138 based project. Does
> anyone
> > > have any opinions, tips or experiences they could share on how
> > > successful this combination is.
> > >
> > > Thanks in advance.
> > >
> > > Cheers,
> > >
> > > Peter.
> > > --
> > > ------------------------------
> > > Web: www.homanndesigns.com
> > > email: homann@h...
> > > Phone: +61 421 601 665
> > > www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
> > > www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
> > >
> > >
> > >
> > > _____
> > >
> > > > .
> > >
> > >
> > >
> > > _____
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> > SPONSORED LINKS
> >
> > Microcontrollers
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Microcontrollers&w1=Microcontroller>
> > &k=Microcontrollers&w1=Microcontroller
> >
> s&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w
> 5=
> > 8085+microprocessor&c=5&s0&.sig=OPqm0ilH6VyGn-geZ0nNwA>
> >
> > Microprocessor
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Microprocessor&w1=Microcontrollers&>
> > &k=Microprocessor&w1=Microcontrollers&
> >
> w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w5=
> 80
> > 85+microprocessor&c=5&s0&.sig93hF7rArBsrPQJltQ_w>
> >
> > Intel microprocessors
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Intel+microprocessors&w1=Microcontr>
> > &k=Intel+microprocessors&w1=Microcontr
> >
> ollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroll
> er
> > s&w585+microprocessor&c=5&s0&.sigrTtKaQUw-Vd0BgTdDmw>
> >
> > Pic microcontrollers
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Pic+microcontrollers&w1=Microcontro>
> > &k=Pic+microcontrollers&w1=Microcontro
> >
> llers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrolle
> rs
> > &w585+microprocessor&c=5&s0&.sig=iYT6za1gT3-VT1hwIylDpw>
> >
> > 8085 microprocessor
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k85+microprocessor&w1=Microcontrol>
> > &k85+microprocessor&w1=Microcontrol
> >
> lers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroller
> s&
> > w585+microprocessor&c=5&s0&.sig=PhYMBsCkQptYbazQFyNujQ>
> >
> >
> >
> >
> >
> > _____
> >
> > > .
> >
> >
> >
> > _____
> >
> >
> >
> >
> >
> >
> >
> > ---------------------------------
> > > Terms of Service.
> >
> >
> >
> > _____
> >
> >
> >
> >
> SPONSORED LINKS
>
> Microprocessor
> <http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microprocessor&w2
> =Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=4&s=9
> 3&.sig=tsVC-J9hJ5qyXg0WPR0l6g>
>
> Microcontrollers
> <http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microprocessor&
> w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=4&s
> &.sig=DvJVNqC_pqRTm8Xq01nxwg>
>
> Pic microcontrollers
> <http://groups.yahoo.com/gads?t=ms&k=Pic+microcontrollers&w1=Microproces
> sor&w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c
> =4&s&.sig=TpkoX4KofDJ7c6LyBvUqVQ>
>
> 8051 microprocessor
> <http://groups.yahoo.com/gads?t=ms&k51+microprocessor&w1=Microprocess
> or&w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=
> 4&s&.sig=1Ipf1Fjfbd_HVIlekkDP-A >
>
> _____
>
> > . >
> _____ >
>
> --
------
> YAHOO! GROUPS LINKS
>
> a.. > --
------
>
>
> variety of ports, including the Keil MB2100 board. I am trying to get
> him to post the IAR port to the LPC (there is difference in the way the
> assembly language is done between Keil and IAR - Keil has a better asm
> macro). Comments to him will help.
>
Dan,
I've just uploaded FreeRTOS V3.2.2. This adds a supported IAR LPC2129 port.
Converting to an LPC2138 should not be a problem.
Regards,
Richard. http://www.FreeRTOS.org
>
>
> Freertos is supported on everything from PIC to LPC to PC. >
> Dan > _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf
> Of lehighuboy
> Sent: Friday, September 16, 2005 8:54 AM
> To: lpc2000@lpc2...
> Subject: [lpc2000] Re: LPC2138 and FreeRTOS >
> Dan,
>
> Where can I get a copy of the Keil port of the rtos?
>
> Thanks, Garrett
>
> --- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...> wrote:
> > Thanks for pointing this out. The credentials were temporarily
> disabled.
> > You should be able to get in now. The link should be
> >
> > ftp::/ftp.inclinesoftworks.com if using IE, or just
> ftp.inclinesoftworks.com
> > <ftp://ftp.inclinesoftworks.com/> if using ftp.com <ftp://ftp.com/>
> > command line
> >
> >
> >
> > Dan
> >
> >
> >
> > _____
> >
> > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> Behalf Of
> > Rock Dubois
> > Sent: Thursday, September 15, 2005 8:30 PM
> > To: lpc2000@lpc2...
> > Subject: RE: [lpc2000] Re: LPC2138 and FreeRTOS
> >
> >
> >
> > Dan,
> >
> > I tried to download it from your ftp site but it didn't let me in.
> I tried
> > again but still not able to login.
> >
> > Yvon.
> >
> >
> > Dan Beadle <dan.beadle@i...> wrote:
> > I have just posted FreeRTOS Version 3.20 for IAR/ARM on my website
> > ftp://inclinesoftworks.com <ftp://inclinesoftworks.com/> Use
> UserName
> > incline9_cust and pw freertos.
> >
> >
> >
> > This version of FreeRTOS has been adapted to IAR/ARM. (Using Version
> > 4.30a of WARM). It works with MCB2100 Eval Board. It is adapted
> from
> > the Keil and SAM versions of the RTOS.
> >
> >
> >
> > If you have questions, you can contact me..
> >
> > Dan Beadle
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > _____
> >
> > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> Behalf
> > Of charlesgrenz
> > Sent: Wednesday, August 24, 2005 3:39 PM
> > To: lpc2000@lpc2...
> > Subject: [lpc2000] Re: LPC2138 and FreeRTOS
> >
> >
> >
> > Hi Dan,
> >
> > Did you find the port from gcc to IAR difficult? I am using IAR
> and
> > I was looking at the LPC2106 gcc version and porting that to the IAR
> > 2106.
> >
> > Thanks,
> > Charles
> >
> >
> >
> > --- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...>
> wrote:
> > > I did an early port of this to the IAR tool chain. It took a
> while to
> > > get my mind around all the files, but, in truth, it is quite
> small and
> > > easy to work with. The documentation is only available online. I
> > would
> > > prefer a PDF to a web page, but that is a nit.
> > >
> > >
> > >
> > > I am using FreeRTOS on several projects. I like the following
> > features:
> > >
> > >
> > >
> > > - Lean (small footprint, only the features I need.)
> > >
> > > - Evolving (almost too many code drops. I am giving up on
> > > chasing changes)
> > >
> > > - Tractable. I got my mind around the entire code base,
> > because
> > > it is so small
> > >
> > >
> > >
> > > In the past, deeply embedded projects often would not use any
> RTOS.
> > This
> > > brings true tasking to my systems without the overhead and cost of
> > WinCE
> > > or Linux. I considered uCOS, but this package does all that I
> need
> > from
> > > uCOS. And the price is right.
> > >
> > >
> > >
> > > _____
> > >
> > > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> > Behalf
> > > Of Peter Homann
> > > Sent: Wednesday, August 24, 2005 5:15 AM
> > > To: lpc2000@lpc2...
> > > Subject: [lpc2000] LPC2138 and FreeRTOS
> > >
> > >
> > >
> > > Hi,
> > >
> > > I'm looking at using FreeRTOS on a LPC2138 based project. Does
> anyone
> > > have any opinions, tips or experiences they could share on how
> > > successful this combination is.
> > >
> > > Thanks in advance.
> > >
> > > Cheers,
> > >
> > > Peter.
> > > --
> > > ------------------------------
> > > Web: www.homanndesigns.com
> > > email: homann@h...
> > > Phone: +61 421 601 665
> > > www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
> > > www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
> > >
> > >
> > >
> > > _____
> > >
> > > > .
> > >
> > >
> > >
> > > _____
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> > SPONSORED LINKS
> >
> > Microcontrollers
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Microcontrollers&w1=Microcontroller>
> > &k=Microcontrollers&w1=Microcontroller
> >
> s&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w
> 5=
> > 8085+microprocessor&c=5&s0&.sig=OPqm0ilH6VyGn-geZ0nNwA>
> >
> > Microprocessor
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Microprocessor&w1=Microcontrollers&>
> > &k=Microprocessor&w1=Microcontrollers&
> >
> w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w5=
> 80
> > 85+microprocessor&c=5&s0&.sig93hF7rArBsrPQJltQ_w>
> >
> > Intel microprocessors
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Intel+microprocessors&w1=Microcontr>
> > &k=Intel+microprocessors&w1=Microcontr
> >
> ollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroll
> er
> > s&w585+microprocessor&c=5&s0&.sigrTtKaQUw-Vd0BgTdDmw>
> >
> > Pic microcontrollers
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Pic+microcontrollers&w1=Microcontro>
> > &k=Pic+microcontrollers&w1=Microcontro
> >
> llers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrolle
> rs
> > &w585+microprocessor&c=5&s0&.sig=iYT6za1gT3-VT1hwIylDpw>
> >
> > 8085 microprocessor
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k85+microprocessor&w1=Microcontrol>
> > &k85+microprocessor&w1=Microcontrol
> >
> lers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroller
> s&
> > w585+microprocessor&c=5&s0&.sig=PhYMBsCkQptYbazQFyNujQ>
> >
> >
> >
> >
> >
> > _____
> >
> > > .
> >
> >
> >
> > _____
> >
> >
> >
> >
> >
> >
> >
> > ---------------------------------
> > > Terms of Service.
> >
> >
> >
> > _____
> >
> >
> >
> >
> SPONSORED LINKS
>
> Microprocessor
> <http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microprocessor&w2
> =Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=4&s=9
> 3&.sig=tsVC-J9hJ5qyXg0WPR0l6g>
>
> Microcontrollers
> <http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microprocessor&
> w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=4&s
> &.sig=DvJVNqC_pqRTm8Xq01nxwg>
>
> Pic microcontrollers
> <http://groups.yahoo.com/gads?t=ms&k=Pic+microcontrollers&w1=Microproces
> sor&w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c
> =4&s&.sig=TpkoX4KofDJ7c6LyBvUqVQ>
>
> 8051 microprocessor
> <http://groups.yahoo.com/gads?t=ms&k51+microprocessor&w1=Microprocess
> or&w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=
> 4&s&.sig=1Ipf1Fjfbd_HVIlekkDP-A >
>
> _____
>
> > . >
> _____ >
>
> --
------
> YAHOO! GROUPS LINKS
>
> a.. > --
------
>
>
Reply by ●September 25, 20052005-09-25
Thanks.
This will make FreeRTOS easy for those of us using IAR
_____
From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf
Of FreeRTOS Info
Sent: Friday, September 23, 2005 8:53 AM
To: lpc2000@lpc2...
Subject: Re: [lpc2000] Re: LPC2138 and FreeRTOS
> Go to www.freertos.org <http://www.freertos.org/> . Richard has a
wide
> variety of ports, including the Keil MB2100 board. I am trying to get
> him to post the IAR port to the LPC (there is difference in the way
the
> assembly language is done between Keil and IAR - Keil has a better asm
> macro). Comments to him will help.
>
Dan,
I've just uploaded FreeRTOS V3.2.2. This adds a supported IAR LPC2129
port.
Converting to an LPC2138 should not be a problem.
Regards,
Richard. http://www.FreeRTOS.org
>
>
> Freertos is supported on everything from PIC to LPC to PC. >
> Dan > _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
Behalf
> Of lehighuboy
> Sent: Friday, September 16, 2005 8:54 AM
> To: lpc2000@lpc2...
> Subject: [lpc2000] Re: LPC2138 and FreeRTOS >
> Dan,
>
> Where can I get a copy of the Keil port of the rtos?
>
> Thanks, Garrett
>
> --- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...> wrote:
> > Thanks for pointing this out. The credentials were temporarily
> disabled.
> > You should be able to get in now. The link should be
> >
> > ftp::/ftp.inclinesoftworks.com if using IE, or just
> ftp.inclinesoftworks.com
> > <ftp://ftp.inclinesoftworks.com/> if using ftp.com <ftp://ftp.com/>
> > command line
> >
> >
> >
> > Dan
> >
> >
> >
> > _____
> >
> > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> Behalf Of
> > Rock Dubois
> > Sent: Thursday, September 15, 2005 8:30 PM
> > To: lpc2000@lpc2...
> > Subject: RE: [lpc2000] Re: LPC2138 and FreeRTOS
> >
> >
> >
> > Dan,
> >
> > I tried to download it from your ftp site but it didn't let me in.
> I tried
> > again but still not able to login.
> >
> > Yvon.
> >
> >
> > Dan Beadle <dan.beadle@i...> wrote:
> > I have just posted FreeRTOS Version 3.20 for IAR/ARM on my website
> > ftp://inclinesoftworks.com <ftp://inclinesoftworks.com/> Use
> UserName
> > incline9_cust and pw freertos.
> >
> >
> >
> > This version of FreeRTOS has been adapted to IAR/ARM. (Using Version
> > 4.30a of WARM). It works with MCB2100 Eval Board. It is adapted
> from
> > the Keil and SAM versions of the RTOS.
> >
> >
> >
> > If you have questions, you can contact me..
> >
> > Dan Beadle
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > _____
> >
> > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> Behalf
> > Of charlesgrenz
> > Sent: Wednesday, August 24, 2005 3:39 PM
> > To: lpc2000@lpc2...
> > Subject: [lpc2000] Re: LPC2138 and FreeRTOS
> >
> >
> >
> > Hi Dan,
> >
> > Did you find the port from gcc to IAR difficult? I am using IAR
> and
> > I was looking at the LPC2106 gcc version and porting that to the IAR
> > 2106.
> >
> > Thanks,
> > Charles
> >
> >
> >
> > --- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...>
> wrote:
> > > I did an early port of this to the IAR tool chain. It took a
> while to
> > > get my mind around all the files, but, in truth, it is quite
> small and
> > > easy to work with. The documentation is only available online. I
> > would
> > > prefer a PDF to a web page, but that is a nit.
> > >
> > >
> > >
> > > I am using FreeRTOS on several projects. I like the following
> > features:
> > >
> > >
> > >
> > > - Lean (small footprint, only the features I need.)
> > >
> > > - Evolving (almost too many code drops. I am giving up on
> > > chasing changes)
> > >
> > > - Tractable. I got my mind around the entire code base,
> > because
> > > it is so small
> > >
> > >
> > >
> > > In the past, deeply embedded projects often would not use any
> RTOS.
> > This
> > > brings true tasking to my systems without the overhead and cost of
> > WinCE
> > > or Linux. I considered uCOS, but this package does all that I
> need
> > from
> > > uCOS. And the price is right.
> > >
> > >
> > >
> > > _____
> > >
> > > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> > Behalf
> > > Of Peter Homann
> > > Sent: Wednesday, August 24, 2005 5:15 AM
> > > To: lpc2000@lpc2...
> > > Subject: [lpc2000] LPC2138 and FreeRTOS
> > >
> > >
> > >
> > > Hi,
> > >
> > > I'm looking at using FreeRTOS on a LPC2138 based project. Does
> anyone
> > > have any opinions, tips or experiences they could share on how
> > > successful this combination is.
> > >
> > > Thanks in advance.
> > >
> > > Cheers,
> > >
> > > Peter.
> > > --
> > > ------------------------------
> > > Web: www.homanndesigns.com
> > > email: homann@h...
> > > Phone: +61 421 601 665
> > > www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
> > > www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
> > >
> > >
> > >
> > > _____
> > >
> > > > .
> > >
> > >
> > >
> > > _____
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> > SPONSORED LINKS
> >
> > Microcontrollers
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Microcontrollers&w1=Microcontroller>
> > &k=Microcontrollers&w1=Microcontroller
> >
> s&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w
> 5=
> > 8085+microprocessor&c=5&s0&.sig=OPqm0ilH6VyGn-geZ0nNwA>
> >
> > Microprocessor
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Microprocessor&w1=Microcontrollers&>
> > &k=Microprocessor&w1=Microcontrollers&
> >
> w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w5=
> 80
> > 85+microprocessor&c=5&s0&.sig93hF7rArBsrPQJltQ_w>
> >
> > Intel microprocessors
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Intel+microprocessors&w1=Microcontr>
> > &k=Intel+microprocessors&w1=Microcontr
> >
> ollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroll
> er
> > s&w585+microprocessor&c=5&s0&.sigrTtKaQUw-Vd0BgTdDmw>
> >
> > Pic microcontrollers
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Pic+microcontrollers&w1=Microcontro>
> > &k=Pic+microcontrollers&w1=Microcontro
> >
> llers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrolle
> rs
> > &w585+microprocessor&c=5&s0&.sig=iYT6za1gT3-VT1hwIylDpw>
> >
> > 8085 microprocessor
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k85+microprocessor&w1=Microcontrol>
> > &k85+microprocessor&w1=Microcontrol
> >
> lers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroller
> s&
> > w585+microprocessor&c=5&s0&.sig=PhYMBsCkQptYbazQFyNujQ>
> >
> >
> >
> >
> >
> > _____
> >
> > > .
> >
> >
> >
> > _____
> >
> >
> >
> >
> >
> >
> >
> > ---------------------------------
> > > Terms of Service.
> >
> >
> >
> > _____
> >
> >
> >
> >
> SPONSORED LINKS
>
> Microprocessor
>
<http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microprocessor&w2
>
=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=4&s=9
> 3&.sig=tsVC-J9hJ5qyXg0WPR0l6g>
>
> Microcontrollers
>
<http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microprocessor&
>
w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=4&s
> &.sig=DvJVNqC_pqRTm8Xq01nxwg>
>
> Pic microcontrollers
>
<http://groups.yahoo.com/gads?t=ms&k=Pic+microcontrollers&w1=Microproces
>
sor&w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c
> =4&s&.sig=TpkoX4KofDJ7c6LyBvUqVQ>
>
> 8051 microprocessor
>
<http://groups.yahoo.com/gads?t=ms&k51+microprocessor&w1=Microprocess
>
or&w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=
> 4&s&.sig=1Ipf1Fjfbd_HVIlekkDP-A >
>
> _____
>
> > . >
> _____
--
------
> > .
_____
This will make FreeRTOS easy for those of us using IAR
_____
From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf
Of FreeRTOS Info
Sent: Friday, September 23, 2005 8:53 AM
To: lpc2000@lpc2...
Subject: Re: [lpc2000] Re: LPC2138 and FreeRTOS
> Go to www.freertos.org <http://www.freertos.org/> . Richard has a
wide
> variety of ports, including the Keil MB2100 board. I am trying to get
> him to post the IAR port to the LPC (there is difference in the way
the
> assembly language is done between Keil and IAR - Keil has a better asm
> macro). Comments to him will help.
>
Dan,
I've just uploaded FreeRTOS V3.2.2. This adds a supported IAR LPC2129
port.
Converting to an LPC2138 should not be a problem.
Regards,
Richard. http://www.FreeRTOS.org
>
>
> Freertos is supported on everything from PIC to LPC to PC. >
> Dan > _____
>
> From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
Behalf
> Of lehighuboy
> Sent: Friday, September 16, 2005 8:54 AM
> To: lpc2000@lpc2...
> Subject: [lpc2000] Re: LPC2138 and FreeRTOS >
> Dan,
>
> Where can I get a copy of the Keil port of the rtos?
>
> Thanks, Garrett
>
> --- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...> wrote:
> > Thanks for pointing this out. The credentials were temporarily
> disabled.
> > You should be able to get in now. The link should be
> >
> > ftp::/ftp.inclinesoftworks.com if using IE, or just
> ftp.inclinesoftworks.com
> > <ftp://ftp.inclinesoftworks.com/> if using ftp.com <ftp://ftp.com/>
> > command line
> >
> >
> >
> > Dan
> >
> >
> >
> > _____
> >
> > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> Behalf Of
> > Rock Dubois
> > Sent: Thursday, September 15, 2005 8:30 PM
> > To: lpc2000@lpc2...
> > Subject: RE: [lpc2000] Re: LPC2138 and FreeRTOS
> >
> >
> >
> > Dan,
> >
> > I tried to download it from your ftp site but it didn't let me in.
> I tried
> > again but still not able to login.
> >
> > Yvon.
> >
> >
> > Dan Beadle <dan.beadle@i...> wrote:
> > I have just posted FreeRTOS Version 3.20 for IAR/ARM on my website
> > ftp://inclinesoftworks.com <ftp://inclinesoftworks.com/> Use
> UserName
> > incline9_cust and pw freertos.
> >
> >
> >
> > This version of FreeRTOS has been adapted to IAR/ARM. (Using Version
> > 4.30a of WARM). It works with MCB2100 Eval Board. It is adapted
> from
> > the Keil and SAM versions of the RTOS.
> >
> >
> >
> > If you have questions, you can contact me..
> >
> > Dan Beadle
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > _____
> >
> > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> Behalf
> > Of charlesgrenz
> > Sent: Wednesday, August 24, 2005 3:39 PM
> > To: lpc2000@lpc2...
> > Subject: [lpc2000] Re: LPC2138 and FreeRTOS
> >
> >
> >
> > Hi Dan,
> >
> > Did you find the port from gcc to IAR difficult? I am using IAR
> and
> > I was looking at the LPC2106 gcc version and porting that to the IAR
> > 2106.
> >
> > Thanks,
> > Charles
> >
> >
> >
> > --- In lpc2000@lpc2..., "Dan Beadle" <dan.beadle@i...>
> wrote:
> > > I did an early port of this to the IAR tool chain. It took a
> while to
> > > get my mind around all the files, but, in truth, it is quite
> small and
> > > easy to work with. The documentation is only available online. I
> > would
> > > prefer a PDF to a web page, but that is a nit.
> > >
> > >
> > >
> > > I am using FreeRTOS on several projects. I like the following
> > features:
> > >
> > >
> > >
> > > - Lean (small footprint, only the features I need.)
> > >
> > > - Evolving (almost too many code drops. I am giving up on
> > > chasing changes)
> > >
> > > - Tractable. I got my mind around the entire code base,
> > because
> > > it is so small
> > >
> > >
> > >
> > > In the past, deeply embedded projects often would not use any
> RTOS.
> > This
> > > brings true tasking to my systems without the overhead and cost of
> > WinCE
> > > or Linux. I considered uCOS, but this package does all that I
> need
> > from
> > > uCOS. And the price is right.
> > >
> > >
> > >
> > > _____
> > >
> > > From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On
> > Behalf
> > > Of Peter Homann
> > > Sent: Wednesday, August 24, 2005 5:15 AM
> > > To: lpc2000@lpc2...
> > > Subject: [lpc2000] LPC2138 and FreeRTOS
> > >
> > >
> > >
> > > Hi,
> > >
> > > I'm looking at using FreeRTOS on a LPC2138 based project. Does
> anyone
> > > have any opinions, tips or experiences they could share on how
> > > successful this combination is.
> > >
> > > Thanks in advance.
> > >
> > > Cheers,
> > >
> > > Peter.
> > > --
> > > ------------------------------
> > > Web: www.homanndesigns.com
> > > email: homann@h...
> > > Phone: +61 421 601 665
> > > www.homanndesigns.com/DigiSpeedDeal.html - DC Spindle control
> > > www.homanndesigns.com/TurboTaig.html - Taig Mill Upgrade board
> > >
> > >
> > >
> > > _____
> > >
> > > > .
> > >
> > >
> > >
> > > _____
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> > SPONSORED LINKS
> >
> > Microcontrollers
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Microcontrollers&w1=Microcontroller>
> > &k=Microcontrollers&w1=Microcontroller
> >
> s&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w
> 5=
> > 8085+microprocessor&c=5&s0&.sig=OPqm0ilH6VyGn-geZ0nNwA>
> >
> > Microprocessor
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Microprocessor&w1=Microcontrollers&>
> > &k=Microprocessor&w1=Microcontrollers&
> >
> w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w5=
> 80
> > 85+microprocessor&c=5&s0&.sig93hF7rArBsrPQJltQ_w>
> >
> > Intel microprocessors
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Intel+microprocessors&w1=Microcontr>
> > &k=Intel+microprocessors&w1=Microcontr
> >
> ollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroll
> er
> > s&w585+microprocessor&c=5&s0&.sigrTtKaQUw-Vd0BgTdDmw>
> >
> > Pic microcontrollers
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k=Pic+microcontrollers&w1=Microcontro>
> > &k=Pic+microcontrollers&w1=Microcontro
> >
> llers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrolle
> rs
> > &w585+microprocessor&c=5&s0&.sig=iYT6za1gT3-VT1hwIylDpw>
> >
> > 8085 microprocessor
> > <http://groups.yahoo.com/gads?t=ms
> > <http://groups.yahoo.com/gads?
> t=ms&k85+microprocessor&w1=Microcontrol>
> > &k85+microprocessor&w1=Microcontrol
> >
> lers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroller
> s&
> > w585+microprocessor&c=5&s0&.sig=PhYMBsCkQptYbazQFyNujQ>
> >
> >
> >
> >
> >
> > _____
> >
> > > .
> >
> >
> >
> > _____
> >
> >
> >
> >
> >
> >
> >
> > ---------------------------------
> > > Terms of Service.
> >
> >
> >
> > _____
> >
> >
> >
> >
> SPONSORED LINKS
>
> Microprocessor
>
<http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microprocessor&w2
>
=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=4&s=9
> 3&.sig=tsVC-J9hJ5qyXg0WPR0l6g>
>
> Microcontrollers
>
<http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microprocessor&
>
w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=4&s
> &.sig=DvJVNqC_pqRTm8Xq01nxwg>
>
> Pic microcontrollers
>
<http://groups.yahoo.com/gads?t=ms&k=Pic+microcontrollers&w1=Microproces
>
sor&w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c
> =4&s&.sig=TpkoX4KofDJ7c6LyBvUqVQ>
>
> 8051 microprocessor
>
<http://groups.yahoo.com/gads?t=ms&k51+microprocessor&w1=Microprocess
>
or&w2=Microcontrollers&w3=Pic+microcontrollers&w451+microprocessor&c=
> 4&s&.sig=1Ipf1Fjfbd_HVIlekkDP-A >
>
> _____
>
> > . >
> _____
--
------
> > .
_____
Reply by ●September 25, 20052005-09-25
Hi,
I am looking for an open source RTOS for Keil MCB2130
(LPC2138) board with TCP/IP. This board does not have
Ethernet. I want to use a Bluetooth (PPP over serial
Bluetooth) or WLAN(GPIO interface) with LPC2138.
Has anybody tried it?
Please give your suggestions. Thanks.
Regards,
Balaji
--- Dan Beadle <dan.beadle@dan....>
wrote:
> Thanks. >
> This will make FreeRTOS easy for those of us using
> IAR >
> _____
>
> From: lpc2000@lpc2...
> [mailto:lpc2000@lpc2...] On Behalf
> Of FreeRTOS Info
> Sent: Friday, September 23, 2005 8:53 AM
> To: lpc2000@lpc2...
> Subject: Re: [lpc2000] Re: LPC2138 and FreeRTOS >
> > Go to www.freertos.org <http://www.freertos.org/>
> . Richard has a
> wide
> > variety of ports, including the Keil MB2100 board.
> I am trying to get
> > him to post the IAR port to the LPC (there is
> difference in the way
> the
> > assembly language is done between Keil and IAR -
> Keil has a better asm
> > macro). Comments to him will help.
> > Dan,
>
> I've just uploaded FreeRTOS V3.2.2. This adds a
> supported IAR LPC2129
> port.
> Converting to an LPC2138 should not be a problem.
>
> Regards,
> Richard. > http://www.FreeRTOS.org >
>
> >
> >
> > Freertos is supported on everything from PIC to
> LPC to PC.
> >
> >
> >
> > Dan
> >
> >
> >
> >
> >
> > _____
> >
> > From: lpc2000@lpc2...
> [mailto:lpc2000@lpc2...] On
> Behalf
> > Of lehighuboy
> > Sent: Friday, September 16, 2005 8:54 AM
> > To: lpc2000@lpc2...
> > Subject: [lpc2000] Re: LPC2138 and FreeRTOS
> >
> >
> >
> > Dan,
> >
> > Where can I get a copy of the Keil port of the
> rtos?
> >
> > Thanks, Garrett
> >
> > --- In lpc2000@lpc2..., "Dan Beadle"
> <dan.beadle@i...> wrote:
> > > Thanks for pointing this out. The credentials
> were temporarily
> > disabled.
> > > You should be able to get in now. The link
> should be
> > >
> > > ftp::/ftp.inclinesoftworks.com if using IE, or
> just
> > ftp.inclinesoftworks.com
> > > <ftp://ftp.inclinesoftworks.com/> if using
> ftp.com <ftp://ftp.com/>
> > > command line
> > >
> > >
> > >
> > > Dan
> > >
> > >
> > >
> > > _____
> > >
> > > From: lpc2000@lpc2...
> [mailto:lpc2000@lpc2...] On
> > Behalf Of
> > > Rock Dubois
> > > Sent: Thursday, September 15, 2005 8:30 PM
> > > To: lpc2000@lpc2...
> > > Subject: RE: [lpc2000] Re: LPC2138 and FreeRTOS
> > >
> > >
> > >
> > > Dan,
> > >
> > > I tried to download it from your ftp site but it
> didn't let me in.
> > I tried
> > > again but still not able to login.
> > >
> > > Yvon.
> > >
> > >
> > > Dan Beadle <dan.beadle@i...> wrote:
> > > I have just posted FreeRTOS Version 3.20 for
> IAR/ARM on my website
> > > ftp://inclinesoftworks.com
> <ftp://inclinesoftworks.com/> Use
> > UserName
> > > incline9_cust and pw freertos.
> > >
> > >
> > >
> > > This version of FreeRTOS has been adapted to
> IAR/ARM. (Using Version
> > > 4.30a of WARM). It works with MCB2100 Eval
> Board. It is adapted
> > from
> > > the Keil and SAM versions of the RTOS.
> > >
> > >
> > >
> > > If you have questions, you can contact me..
> > >
> > > Dan Beadle
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > _____
> > >
> > > From: lpc2000@lpc2...
> [mailto:lpc2000@lpc2...] On
> > Behalf
> > > Of charlesgrenz
> > > Sent: Wednesday, August 24, 2005 3:39 PM
> > > To: lpc2000@lpc2...
> > > Subject: [lpc2000] Re: LPC2138 and FreeRTOS
> > >
> > >
> > >
> > > Hi Dan,
> > >
> > > Did you find the port from gcc to IAR
> difficult? I am using IAR
> > and
> > > I was looking at the LPC2106 gcc version and
> porting that to the IAR
> > > 2106.
> > >
> > > Thanks,
> > > Charles
> > >
> > >
> > >
> > > --- In lpc2000@lpc2..., "Dan Beadle"
> <dan.beadle@i...>
> > wrote:
> > > > I did an early port of this to the IAR tool
> chain. It took a
> > while to
> > > > get my mind around all the files, but, in
> truth, it is quite
> > small and
> > > > easy to work with. The documentation is only
> available online. I
> > > would
> > > > prefer a PDF to a web page, but that is a nit.
> > > >
> > > >
> > > >
> > > > I am using FreeRTOS on several projects. I
> like the following
> > > features:
>
=== message truncated === Dream is just a dream. A goal is a dream with a plan and a deadline.
- Harvey Mackay
I am looking for an open source RTOS for Keil MCB2130
(LPC2138) board with TCP/IP. This board does not have
Ethernet. I want to use a Bluetooth (PPP over serial
Bluetooth) or WLAN(GPIO interface) with LPC2138.
Has anybody tried it?
Please give your suggestions. Thanks.
Regards,
Balaji
--- Dan Beadle <dan.beadle@dan....>
wrote:
> Thanks. >
> This will make FreeRTOS easy for those of us using
> IAR >
> _____
>
> From: lpc2000@lpc2...
> [mailto:lpc2000@lpc2...] On Behalf
> Of FreeRTOS Info
> Sent: Friday, September 23, 2005 8:53 AM
> To: lpc2000@lpc2...
> Subject: Re: [lpc2000] Re: LPC2138 and FreeRTOS >
> > Go to www.freertos.org <http://www.freertos.org/>
> . Richard has a
> wide
> > variety of ports, including the Keil MB2100 board.
> I am trying to get
> > him to post the IAR port to the LPC (there is
> difference in the way
> the
> > assembly language is done between Keil and IAR -
> Keil has a better asm
> > macro). Comments to him will help.
> > Dan,
>
> I've just uploaded FreeRTOS V3.2.2. This adds a
> supported IAR LPC2129
> port.
> Converting to an LPC2138 should not be a problem.
>
> Regards,
> Richard. > http://www.FreeRTOS.org >
>
> >
> >
> > Freertos is supported on everything from PIC to
> LPC to PC.
> >
> >
> >
> > Dan
> >
> >
> >
> >
> >
> > _____
> >
> > From: lpc2000@lpc2...
> [mailto:lpc2000@lpc2...] On
> Behalf
> > Of lehighuboy
> > Sent: Friday, September 16, 2005 8:54 AM
> > To: lpc2000@lpc2...
> > Subject: [lpc2000] Re: LPC2138 and FreeRTOS
> >
> >
> >
> > Dan,
> >
> > Where can I get a copy of the Keil port of the
> rtos?
> >
> > Thanks, Garrett
> >
> > --- In lpc2000@lpc2..., "Dan Beadle"
> <dan.beadle@i...> wrote:
> > > Thanks for pointing this out. The credentials
> were temporarily
> > disabled.
> > > You should be able to get in now. The link
> should be
> > >
> > > ftp::/ftp.inclinesoftworks.com if using IE, or
> just
> > ftp.inclinesoftworks.com
> > > <ftp://ftp.inclinesoftworks.com/> if using
> ftp.com <ftp://ftp.com/>
> > > command line
> > >
> > >
> > >
> > > Dan
> > >
> > >
> > >
> > > _____
> > >
> > > From: lpc2000@lpc2...
> [mailto:lpc2000@lpc2...] On
> > Behalf Of
> > > Rock Dubois
> > > Sent: Thursday, September 15, 2005 8:30 PM
> > > To: lpc2000@lpc2...
> > > Subject: RE: [lpc2000] Re: LPC2138 and FreeRTOS
> > >
> > >
> > >
> > > Dan,
> > >
> > > I tried to download it from your ftp site but it
> didn't let me in.
> > I tried
> > > again but still not able to login.
> > >
> > > Yvon.
> > >
> > >
> > > Dan Beadle <dan.beadle@i...> wrote:
> > > I have just posted FreeRTOS Version 3.20 for
> IAR/ARM on my website
> > > ftp://inclinesoftworks.com
> <ftp://inclinesoftworks.com/> Use
> > UserName
> > > incline9_cust and pw freertos.
> > >
> > >
> > >
> > > This version of FreeRTOS has been adapted to
> IAR/ARM. (Using Version
> > > 4.30a of WARM). It works with MCB2100 Eval
> Board. It is adapted
> > from
> > > the Keil and SAM versions of the RTOS.
> > >
> > >
> > >
> > > If you have questions, you can contact me..
> > >
> > > Dan Beadle
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > _____
> > >
> > > From: lpc2000@lpc2...
> [mailto:lpc2000@lpc2...] On
> > Behalf
> > > Of charlesgrenz
> > > Sent: Wednesday, August 24, 2005 3:39 PM
> > > To: lpc2000@lpc2...
> > > Subject: [lpc2000] Re: LPC2138 and FreeRTOS
> > >
> > >
> > >
> > > Hi Dan,
> > >
> > > Did you find the port from gcc to IAR
> difficult? I am using IAR
> > and
> > > I was looking at the LPC2106 gcc version and
> porting that to the IAR
> > > 2106.
> > >
> > > Thanks,
> > > Charles
> > >
> > >
> > >
> > > --- In lpc2000@lpc2..., "Dan Beadle"
> <dan.beadle@i...>
> > wrote:
> > > > I did an early port of this to the IAR tool
> chain. It took a
> > while to
> > > > get my mind around all the files, but, in
> truth, it is quite
> > small and
> > > > easy to work with. The documentation is only
> available online. I
> > > would
> > > > prefer a PDF to a web page, but that is a nit.
> > > >
> > > >
> > > >
> > > > I am using FreeRTOS on several projects. I
> like the following
> > > features:
>
=== message truncated === Dream is just a dream. A goal is a dream with a plan and a deadline.
- Harvey Mackay
