16F88 and CLKO on RA6

Started by rtstofer May 5, 2005
Has anyone successfully sent Fosc/4 to RA6 when using the internal RC
oscillator at 8 MHz? I have tried a lot of combinations of Fosc and
_CONFIG1 but so far, no output.

I thought I did a pretty good job of reading the datasheet but still,
no output; I must have missed something.



I'm just going through the datasheet. Sometimes an extra pair of eyes
helps...

Read the fuses back and make sure bits 4, 1, 0 are set to 1, 0, 1. And
you probably have to disable A/D with: CMCON=7, ANSEL=0.

Mike --- In piclist@picl..., "rtstofer" <rstofer@p...> wrote:
> Has anyone successfully sent Fosc/4 to RA6 when using the internal RC
> oscillator at 8 MHz? I have tried a lot of combinations of Fosc and
> _CONFIG1 but so far, no output.
>
> I thought I did a pretty good job of reading the datasheet but still,
> no output; I must have missed something.