Has anyone attempted or been successful in adding IP routing
functionality to the IP libraries on the rabbit? I want to be able
to route packets back and forth between a serial PPP interface and
the Ethernet interface on an RCM3000.
It seems that it would require some tweaking to the IP.LIB and
possibly some of the other libraries to implement this functionality.
Anyone know if rabbit has this planned for future released of DC?
Thanks in advance!
Peter
IP Forwarding/Routing between Ethernet and serial PPP on RCM3000
Started by ●December 30, 2003
Reply by ●December 30, 20032003-12-30
Message
It's been talked about a couple of times in this forum.
I've looked at it also, but only from the point of view of the rabbit as
having the destination address on a different interface (not a real
router.) That was a pretty simple hack inside the appropriate lib (I think
I just needed UDP). A real router needs a whole bunch of other stuff I
didn't need to realize. Dunno if
rabbit is thinking about it.
-----Original Message-----Has anyone attempted or been successful in adding IP routing
From: Peter [mailto:a...@yahoo.com]
Sent: Tuesday, December 30, 2003 10:57 AM
To: r...@yahoogroups.com
Subject: [rabbit-semi] IP Forwarding/Routing between Ethernet and serial PPP on RCM3000
functionality to the IP libraries on the rabbit? I want to be able
to route packets back and forth between a serial PPP interface and
the Ethernet interface on an RCM3000.
It seems that it would require some tweaking to the IP.LIB and
possibly some of the other libraries to implement this functionality.
Anyone know if rabbit has this planned for future released of DC?
Thanks in advance!
Peter
Yahoo! Groups Links
To
Reply by ●December 30, 20032003-12-30
I am looking to do a fairly simple implementation - no RIP or ICMP -
just forwarding of IP packets using static route tables.
Peter --- In rabbit-semi@rabb..., "Dave Moore" <dmoore@q...> wrote:
> It's been talked about a couple of times in this forum. I've
looked at it
> also, but only from the point of view of the rabbit as having the
> destination address on a different interface (not a real router.)
That was
> a pretty simple hack inside the appropriate lib (I think I just
needed UDP).
> A real router needs a whole bunch of other stuff I didn't need to
realize.
> Dunno if rabbit is thinking about it.
>
> -----Original Message-----
> From: Peter [mailto:aapeterm@y...]
> Sent: Tuesday, December 30, 2003 10:57 AM
> To: rabbit-semi@rabb...
> Subject: [rabbit-semi] IP Forwarding/Routing between Ethernet and
serial PPP
> on RCM3000 > Has anyone attempted or been successful in adding IP routing
> functionality to the IP libraries on the rabbit? I want to be able
> to route packets back and forth between a serial PPP interface and
> the Ethernet interface on an RCM3000.
>
> It seems that it would require some tweaking to the IP.LIB and
> possibly some of the other libraries to implement this
functionality.
>
> Anyone know if rabbit has this planned for future released of DC?
>
> Thanks in advance!
>
> Peter >
>
> To unsubscribe from this group, send an email to:
> rabbit-semi-unsubscribe@rabb... > _____
>
> > .
just forwarding of IP packets using static route tables.
Peter --- In rabbit-semi@rabb..., "Dave Moore" <dmoore@q...> wrote:
> It's been talked about a couple of times in this forum. I've
looked at it
> also, but only from the point of view of the rabbit as having the
> destination address on a different interface (not a real router.)
That was
> a pretty simple hack inside the appropriate lib (I think I just
needed UDP).
> A real router needs a whole bunch of other stuff I didn't need to
realize.
> Dunno if rabbit is thinking about it.
>
> -----Original Message-----
> From: Peter [mailto:aapeterm@y...]
> Sent: Tuesday, December 30, 2003 10:57 AM
> To: rabbit-semi@rabb...
> Subject: [rabbit-semi] IP Forwarding/Routing between Ethernet and
serial PPP
> on RCM3000 > Has anyone attempted or been successful in adding IP routing
> functionality to the IP libraries on the rabbit? I want to be able
> to route packets back and forth between a serial PPP interface and
> the Ethernet interface on an RCM3000.
>
> It seems that it would require some tweaking to the IP.LIB and
> possibly some of the other libraries to implement this
functionality.
>
> Anyone know if rabbit has this planned for future released of DC?
>
> Thanks in advance!
>
> Peter >
>
> To unsubscribe from this group, send an email to:
> rabbit-semi-unsubscribe@rabb... > _____
>
> > .
Reply by ●January 6, 20042004-01-06
====================================================================
I'm interested too with this kind of fowarding. I have to connect a
rabbit thru ppp and use it as a gateway . So if someone find somthing
i'll be interested.
thanx
Jonathan
===================================================================
--- In rabbit-semi@rabb..., "Peter" <aapeterm@y...> wrote:
> I am looking to do a fairly simple implementation - no RIP or ICMP -
> just forwarding of IP packets using static route tables.
>
> Peter > --- In rabbit-semi@rabb..., "Dave Moore" <dmoore@q...>
wrote:
> > It's been talked about a couple of times in this forum. I've
> looked at it
> > also, but only from the point of view of the rabbit as having the
> > destination address on a different interface (not a real router.)
> That was
> > a pretty simple hack inside the appropriate lib (I think I just
> needed UDP).
> > A real router needs a whole bunch of other stuff I didn't need to
> realize.
> > Dunno if rabbit is thinking about it.
> >
> > -----Original Message-----
> > From: Peter [mailto:aapeterm@y...]
> > Sent: Tuesday, December 30, 2003 10:57 AM
> > To: rabbit-semi@rabb...
> > Subject: [rabbit-semi] IP Forwarding/Routing between Ethernet and
> serial PPP
> > on RCM3000
> >
> >
> > Has anyone attempted or been successful in adding IP routing
> > functionality to the IP libraries on the rabbit? I want to be
able
> > to route packets back and forth between a serial PPP interface and
> > the Ethernet interface on an RCM3000.
> >
> > It seems that it would require some tweaking to the IP.LIB and
> > possibly some of the other libraries to implement this
> functionality.
> >
> > Anyone know if rabbit has this planned for future released of DC?
> >
> > Thanks in advance!
> >
> > Peter
> >
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > rabbit-semi-unsubscribe@rabb...
> >
> >
> >
> >
> >
> > _____
> >
> > > .
I'm interested too with this kind of fowarding. I have to connect a
rabbit thru ppp and use it as a gateway . So if someone find somthing
i'll be interested.
thanx
Jonathan
===================================================================
--- In rabbit-semi@rabb..., "Peter" <aapeterm@y...> wrote:
> I am looking to do a fairly simple implementation - no RIP or ICMP -
> just forwarding of IP packets using static route tables.
>
> Peter > --- In rabbit-semi@rabb..., "Dave Moore" <dmoore@q...>
wrote:
> > It's been talked about a couple of times in this forum. I've
> looked at it
> > also, but only from the point of view of the rabbit as having the
> > destination address on a different interface (not a real router.)
> That was
> > a pretty simple hack inside the appropriate lib (I think I just
> needed UDP).
> > A real router needs a whole bunch of other stuff I didn't need to
> realize.
> > Dunno if rabbit is thinking about it.
> >
> > -----Original Message-----
> > From: Peter [mailto:aapeterm@y...]
> > Sent: Tuesday, December 30, 2003 10:57 AM
> > To: rabbit-semi@rabb...
> > Subject: [rabbit-semi] IP Forwarding/Routing between Ethernet and
> serial PPP
> > on RCM3000
> >
> >
> > Has anyone attempted or been successful in adding IP routing
> > functionality to the IP libraries on the rabbit? I want to be
able
> > to route packets back and forth between a serial PPP interface and
> > the Ethernet interface on an RCM3000.
> >
> > It seems that it would require some tweaking to the IP.LIB and
> > possibly some of the other libraries to implement this
> functionality.
> >
> > Anyone know if rabbit has this planned for future released of DC?
> >
> > Thanks in advance!
> >
> > Peter
> >
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > rabbit-semi-unsubscribe@rabb...
> >
> >
> >
> >
> >
> > _____
> >
> > > .
