Embedded Firmware Refactoring, Optimisation and Migration
Legacy products are often based on older hardware platforms which often become under-powered or run out of memory which constrains further product development. Customers are always looking for new features and improved performance but often either don’t want to invest in new hardware or need to retain the current field population of devices.
These are ongoing challenges for any product manufacturer, but are particularly highlighted in embedded systems where product...
Motion Sensor with Raspberry Pi and MPU6050 - Part 1
This blog will help you build your own, low cost 3-axis motion sensor using Raspberry Pi and Invensense MPU6050.
The Dilemma of Unwritten Requirements
You will probably hear the word “requirements” at least 793 times in your engineering career, mostly in the context of how important it is, in any project, to agree upon clear requirements before committing to (and hastily proceeding towards) a deadline. Some of those times you may actually follow that advice. Other times it’s just talk, like how you should “wear sunscreen when spending time outdoors” and “eat a diet low in saturated fats and...
Requirements, Specifications and Tests
As a freelance developer of all things embedded, it's important that right through a project everyone involved knows what is expected, who is responsible for delivering, and how to confirm that what is delivered meets the customers expectations.
I have a tried and trusted method that works for me each time, is flexible enough to deal with feature-creep and solid enough to give the client that warm fuzzy fealing that they crave.
I've dound that this method of working has in the past been...
A Working Real Time Clock (RTC) Implementation
In one of my projects, data captured from various sensors had to be time stamped in the YearYear/DayDay/MonthMonth, HoursHours:MinutesMinutes:SecondsSeconds format. My initial thought was because there was already a GPRS modem in the system, I could simply configure it to use the network time delivered by the base station when it fired up. Once the GPRS module started up and retrieved the correct time, I could then invoke a simple AT command to read the time stamp into the microcontroller....
Embedded Software Creation II - European Normative & Legislation
In this post I will explain the European Normative. I will answer the main questions and I will be open to answer all the doubts any of you could have. Please leave a comment and I will answer if i could.
Why I need to look and accomplish some standards?The main reason is if you want to comercialize the product in the European Union, if exists any European Directive that cover the product, the product must be marked with the CE mark. For USA it work in the same way by the...
Complexity in Consumer Electronics Considered Harmful
I recently returned from a visit to my grandmother, who lives in an assisted living community, and got to observe both her and my frustration first-hand with a new TV. This was a Vizio flatscreen TV that was fairly easy to set up, and the picture quality was good. But here's what the remote control looks like:
You will note:
- the small lettering (the number buttons are just under 1/4 inch in diameter)
- a typeface chosen for marketing purposes (matching Vizio's "futuristic" corporate...
The Dilemma of Unwritten Requirements
You will probably hear the word “requirements” at least 793 times in your engineering career, mostly in the context of how important it is, in any project, to agree upon clear requirements before committing to (and hastily proceeding towards) a deadline. Some of those times you may actually follow that advice. Other times it’s just talk, like how you should “wear sunscreen when spending time outdoors” and “eat a diet low in saturated fats and...
Patents and the little guy working at home
There are pluses and minuses to having patents. As it stands now the patent system is horribly broken and not doing what the founders intended when they set it up.I have some patents through work and it does look nice to see my name on the patent database. It's kinda like wetting yourself in a dark suit - it gives you a warm feeling but nobody notices.Don Lancaster makes a compelling argument that for the little guy it’s best to avoid the whole mess to the degree possible.
Requirements, Specifications and Tests
As a freelance developer of all things embedded, it's important that right through a project everyone involved knows what is expected, who is responsible for delivering, and how to confirm that what is delivered meets the customers expectations.
I have a tried and trusted method that works for me each time, is flexible enough to deal with feature-creep and solid enough to give the client that warm fuzzy fealing that they crave.
I've dound that this method of working has in the past been...
Embedded Firmware Refactoring, Optimisation and Migration
Legacy products are often based on older hardware platforms which often become under-powered or run out of memory which constrains further product development. Customers are always looking for new features and improved performance but often either don’t want to invest in new hardware or need to retain the current field population of devices.
These are ongoing challenges for any product manufacturer, but are particularly highlighted in embedded systems where product...
Embedded Software Creation II - European Normative & Legislation
In this post I will explain the European Normative. I will answer the main questions and I will be open to answer all the doubts any of you could have. Please leave a comment and I will answer if i could.
Why I need to look and accomplish some standards?The main reason is if you want to comercialize the product in the European Union, if exists any European Directive that cover the product, the product must be marked with the CE mark. For USA it work in the same way by the...
Definite Article: Notes on Traceability
Electronic component distibutor Digi-Key recently announced part tracing for surface-mount components purchased in cut-tape form. This is a big deal, and it’s a feature that is a good example of traceability. Some thing or process that has traceability basically just means that it’s possible to determine an object’s history or provenance: where it came from and what has happened to it since its creation. There are a...
Unmanned Ground Vehicles - Design Considerations for Snow and Cold Environments
It's that time of year when the white stuff falls from the sky across the US, and with it comes lower temperatures. These conditions must be taken into consideration when designing a vehicle for outdoor use.
A few definitions from wikipedia:
Flurry: light, brief snowfall
Snow shower: intermittent snowfall
Light snow: over 1km visibility
Moderate snow: 0.5 to 1km visibility
Heavy snow: less than 0.5km visibility
Blizzard: lasts 3 hours or longer, sustained wind to 35mph, visibility...
Embedded Software Creation II - European Normative & Legislation
In this post I will explain the European Normative. I will answer the main questions and I will be open to answer all the doubts any of you could have. Please leave a comment and I will answer if i could.
Why I need to look and accomplish some standards?The main reason is if you want to comercialize the product in the European Union, if exists any European Directive that cover the product, the product must be marked with the CE mark. For USA it work in the same way by the...
Patents and the little guy working at home
There are pluses and minuses to having patents. As it stands now the patent system is horribly broken and not doing what the founders intended when they set it up.I have some patents through work and it does look nice to see my name on the patent database. It's kinda like wetting yourself in a dark suit - it gives you a warm feeling but nobody notices.Don Lancaster makes a compelling argument that for the little guy it’s best to avoid the whole mess to the degree possible.3D printing for embedded development
Used mostly for creating little plastic objects, the desktop 3D printer is not an obvious addition to the embedded developer's toolbox. However, if you're looking for more reasons to get one, or already have one that's mostly gathering dust, here are a couple of embedded-related ways to get more value out of it.
Unmanned Ground Vehicles - Design Considerations for Snow and Cold Environments
It's that time of year when the white stuff falls from the sky across the US, and with it comes lower temperatures. These conditions must be taken into consideration when designing a vehicle for outdoor use.
A few definitions from wikipedia:
Flurry: light, brief snowfall
Snow shower: intermittent snowfall
Light snow: over 1km visibility
Moderate snow: 0.5 to 1km visibility
Heavy snow: less than 0.5km visibility
Blizzard: lasts 3 hours or longer, sustained wind to 35mph, visibility...
Embedded Systems Co-design for Object Recognition: A Synergistic Approach
Embedded systems co-design for object recognition is essential for real-time image analysis and environmental sensing across various sectors. This methodology harmonizes hardware and software to optimize efficiency and performance. It relies on hardware accelerators, customized neural network architectures, memory hierarchy optimization, and power management to achieve benefits like enhanced performance, lower latency, energy efficiency, real-time responsiveness, and resource optimization. While challenges exist, co-designed systems find applications in consumer electronics, smart cameras, industrial automation, healthcare, and autonomous vehicles, revolutionizing these industries. As technology advances, co-design will continue to shape the future of intelligent embedded systems, making the world safer and more efficient.
Requirements, Specifications and Tests
As a freelance developer of all things embedded, it's important that right through a project everyone involved knows what is expected, who is responsible for delivering, and how to confirm that what is delivered meets the customers expectations.
I have a tried and trusted method that works for me each time, is flexible enough to deal with feature-creep and solid enough to give the client that warm fuzzy fealing that they crave.
I've dound that this method of working has in the past been...
How 5G impacts future IoT development
The Internet of Things (IoT) applications are ubiquitous today. IoT is used in almost every industrial, commercial, and consumer market segment, including autonomous driving, smart factories, automation and preventive maintenance, smart homes, smart cities, security, asset tracking, supply chain management, agriculture, farming, healthcare, smart medicine and remote surgery, augmented reality applications, activity monitoring, and more. The three most promising uses of IoT are smart manufacturing, autonomous driving, and healthcare, particularly remote surgery.
