Hi I am trying to set up a real-time program in microseconds instead of milliseconds. I am using dynamic C. I see that they have delays...

Hi I am trying to set up a real-time program in microseconds instead of milliseconds. I am using dynamic C. I see that they have delays in Milliseconds. (Ex. (DelayMs) ). And also I can access the system clock using MS_TIMER. Does anyone know of anyway to access the system clock in microseconds? I attempted simply dividing by 1000 but I would ne

Does anyone know a vendor or somewhere that I can find existing libraries for the Rabbit core modules? There are a couple on the CadSoft...

Does anyone know a vendor or somewhere that I can find existing libraries for the Rabbit core modules? There are a couple on the CadSoft web site but I'm looking for the RCM-2100 specifically. I realize I can create this for myself, just looking for a leg up on a quick turn project that has dropped into my lap. Thanks, Jeff

Hope this isn't too off topic - but I'm looking at using a RCM3000 to decode a Miller encoded serial data stream. Miller encoding is the ...

Hope this isn't too off topic - but I'm looking at using a RCM3000 to decode a Miller encoded serial data stream. Miller encoding is the same as delay time modulation, whre the present state(bit) is dependent on the last state(bit). The serial data stream is running at 500kHz. Has anyone done this before or know where I might find an algorithm f

Hi, I am doing this internet management device that uses barcode scanner as its input. I am using PS2 connector for this project and I...

Hi, I am doing this internet management device that uses barcode scanner as its input. I am using PS2 connector for this project and I just wondered how to decode the PS2 barcode scanner? Any inputs or samples maybe? Ndo^x

Hi everybody I'am a robotic freak with a six-legged Robot from www.crustcrawler.com and i'am looking for a new Brain for my little...

Hi everybody I'am a robotic freak with a six-legged Robot from www.crustcrawler.com and i'am looking for a new Brain for my little baby. My Way was from the original Basic-Stamp --> BX24 (BasicX) --> ?? I'am goot in programming and pluging together ;-) but not in electronic Details like witch chip and resistor i could connect together to

What does the following compiler error mean? "Internal Error: Cannot generate code around origin directive specifier. Please contact...

What does the following compiler error mean? "Internal Error: Cannot generate code around origin directive specifier. Please contact Z-World." I have no "origin directive" in my code. And the error is on a line of code in a file that hasn't changed in months. Steve FYI...I'm using DC v8.20P

I need to move the ethernet jack from RCM3200 to my PCB due to the packaging of the product. Any suggestion on where to order a...

I need to move the ethernet jack from RCM3200 to my PCB due to the packaging of the product. Any suggestion on where to order a compatible jack besides recycling the one from RCM3200? Do I simply remove the RJ45 Jack from RCM3200, and use TPIN+/- and TPOUT+/- from the connector of RCM3200 and construct the same way as rabbit's schematics?

hello,      I am using the rabbit2000 board with the RCm2200. on board. I have to change the IP address in run time. I am using...

hello,      I am using the rabbit2000 board with the RCm2200. on board. I have to change the IP address in run time. I am using the sample program Ping.c for this. I am using the TCP configuration 6 for the same purpose. It change My IP Address in the run time . but the program not pining the

Does anyone know of a Modbus TCP\IP solution for the R3000? Free would be nice but would also be interested in something commercial if...

Does anyone know of a Modbus TCP\IP solution for the R3000? Free would be nice but would also be interested in something commercial if the price was right. Thanks

Has anyone modified the SED1335F driver to remove or drastically reduce the flicker on the display when updating the graphics...

Has anyone modified the SED1335F driver to remove or drastically reduce the flicker on the display when updating the graphics display buffer?   I am using the driver with a Planar EL display and because of