Simple Automated Log Processing

Steve Branam April 25, 2020

Text log data offers a wealth of information from an embedded system. At least during prototyping and development phases, most systems have some kind of serial log output, or use semihosting methods to log to a serial output channel in a debugger. Then you can capture the logs to a file.

The problem is that they tend to accumulate large volumes of data. Logs can be many thousands of lines long, especially when you run long duration tests. Finding information and evaluating trends in the...

Some Advice For Working From Home

Steve Branam March 28, 20201 comment

The other day I posted a short video of my WFH setup (and here's a May 1st upgrade). Today I have some general advice for WFH for people who are new to it.

I've been doing it randomly for the past 5 years, usually just one or two days a week here and there. Now it's a full-time thing for the duration of the coronavirus. So some of this wanders afield a bit, settling in for the long haul.

Some of it is based on things I've built up over years. It's unreasonable to expect that...

Examining The Stack For Fun And Profit

Steve Branam February 19, 20201 comment

Well, maybe not so much for profit, but certainly for fun. This is a wandering journey of exploration and discovery, learning a variety of interesting and useful things.

One of the concerns with an embedded system is how much memory it needs, known as the memory footprint. This consists of the persistent storage needed for the program (i.e. the flash memory or filesystem space that stores the executable image), and the volatile storage needed to hold the data while executing over long...

VolksEEG Project: Initial Hardware Architecture

Steve Branam November 2, 20211 comment

The initial hardware architecture for the prototype VolksEEG uses an Adafruit Feather nRF52840 Sense, which connects to a PC via USB for UI (User Interface). Through several additional chips, this provides power to and acquires data from the ADS1299 ADC.

An important topic I mentioned in my introduction to the project is isolation, ensuring there is no conductive path for current through the patient. The architecture is therefore split into...

Review: Prototype to Product

Steve Branam October 16, 2021

Prototype to Product: A Practical Guide for Getting to Market, by Alan Cohen, is a must-read for anyone involved in product development, whether in a technical, management, or executive role.

I was reminded of it by Cohen's recent episode on, 388: Brains Generate EMF, which is worth listening to a couple times through, especially if you're interested in medical device development. And in fact his first episode there, 

Video-Based STEM Embedded Systems Curriculum, Part 2

Steve Branam October 25, 2021
Contents: Introduction

This post continues from part 1. It contains the first three lesson plans.

Lesson Plan 1: Introducing Arduino

This lesson is first because Arduino is the simplest programming environment, yet allows lots of interaction with hardware. In...