VERY Fast Japanese Sumo Robots
For some reasons, I could not stop watching. I would love to have the maker of one of these robots to blog about the project here on EmbeddedRelated.com, the sensors, microcontroller, algorithms and the challenges... This would make for a very interesting read! Do you know someone?
Going back to Germany!
A couple of blog posts ago, I wrote that the decision to go to ESC Boston ended up being a great one for many different reasons. I came back from the conference energized and really happy that I went.
These feelings were amplified a few days after my return when I received an email from Rolf Segger, the founder of SEGGER Microcontroller (check out their very new website), asking if I would be interested in visiting their headquarters...
ESC Boston's Videos are Now Up
In my last blog, I told you about my experience at ESC Boston and the few videos that I was planning to produce and publish. Here they are, please have a look and any feedback (positive or negative) is appreciated.
Short HighlightThis is a very short (one minute) montage of some of the footage that I shot at the show & conference. In future shows, I absolutely need to insert clips here and there of engineers saying a few words about the conference (why they...
Back from ESC Boston
NOT going to ESC Boston would have allowed me to stay home, in my comfort zone.
NOT going to ESC Boston would have saved me from driving in the absolutely horrible & stressful Boston traffic1.
NOT going to ESC Boston would have saved me from having to go through a full search & questioning session at the Canada Customs on my return2.
2017/06/06 update: Videos are now up!So two days...
Launch of Youtube Channel: My First Videos - Embedded World 2017
I went to Embedded World 2017 in Nuremberg with an ambitious plan; I would make video highlights of several exhibits (booths) to be presented to the *Related sites audience. I would try to make the vendors focus their pitch on the essential in order to produce a one to three minutes video per booth.
So far my experience with making videos was limited to family videos, so I knew I had lots of reading to do and lots of Youtube videos and tutorials to watch. Trade shows are...
Who else is going to Embedded World 2017 in Nuremberg?
These days I am particularly excited. In a little bit less than a month and a half, I will be travelling to Nuremberg in Germany to attend Embedded World, by far the biggest Embedded Systems trade show with over 1000 vendors displaying their products and services.
I have downloaded the Duolingo app and I'm trying to do a minimum of 30 minutes per day to learn some German. So far, I know that 'Frau' is a woman, 'Mann' is a man, 'Danke' is thank you and 'tschüss' is bye - still a...
New Comments System (please help me test it)
I thought it would take me a day or two to implement, it took almost two weeks...
But here it is, the new comments systems for blogs, heavily inspired by the forum system I developed earlier this year.
Which means that:
- You can easily add images, either by drag and drop or through the 'Insert Image' button
- You can add MathML, TeX and ASCIImath equations and they will be rendered with Mathjax
- You can add code snippets and they will be highlighted with highlights.js
- You can edit...
3 Good News
Good News #1Last week, I announced a new and ambitious reward program that will be funded by the new Vendors Directory.
This week, I am happy to announce that we have our firsts two sponsors! Quantum Leaps & Abelon Systems have agreed to pay the sponsorship fee to be listed in the new Vendors Directory. Because of their support, there is now some money in the reward pool ($1,000) and enough to pay for the firsts 500 'beers' awarded. Please...
The New Forum is LIVE!
After months of hard word, I am very excited to introduce to you the new forum interface.
Here are the key features:
1- Easily add images to a post by drag & dropping the images in the editor
2- Easily attach files to a post by drag & dropping the files in the editor
3- Add latex equations to a post and they will be rendered with Mathjax (tutorial)
4- Add a code snippet and surround the code with
Helping New Bloggers to Break the Ice: A New Ipad Pro for the Author with the Best Article!
Breaking the ice can be tough. Over the years, many individuals have asked to be given access to the blogging interface only to never post an article.
Announcing the 2021 Embedded Online Conference!
Once again this year, Jacob Beningo and I are putting together the Embedded Online Conference. Last year's edition was a very rewarding experience, with over 6,000 registrants, fantastic & insightful talks, and lots of positive feedback. For this year's edition, we are delighted to announce that none other than Jack Ganssle will be giving a Keynote presentation about the 50th anniversary of the Microprocessor.
The 2021 Embedded Online Conference will...
The New Forum is LIVE!
After months of hard word, I am very excited to introduce to you the new forum interface.
Here are the key features:
1- Easily add images to a post by drag & dropping the images in the editor
2- Easily attach files to a post by drag & dropping the files in the editor
3- Add latex equations to a post and they will be rendered with Mathjax (tutorial)
4- Add a code snippet and surround the code with
Back from ESC Boston
NOT going to ESC Boston would have allowed me to stay home, in my comfort zone.
NOT going to ESC Boston would have saved me from driving in the absolutely horrible & stressful Boston traffic1.
NOT going to ESC Boston would have saved me from having to go through a full search & questioning session at the Canada Customs on my return2.
2017/06/06 update: Videos are now up!So two days...
Welcoming MANY New Bloggers!
The response to the latest call for bloggers has been amazing and I am very grateful.
In this post I present to you the individuals who, so far (I am still receiving applications at an impressive rate and will update this page as more bloggers are added), have been given access to the blogging interface. I am very pleased with the positive response and I think the near future will see the publication of many great articles, given the quality of the...
ESC Boston's Videos are Now Up
In my last blog, I told you about my experience at ESC Boston and the few videos that I was planning to produce and publish. Here they are, please have a look and any feedback (positive or negative) is appreciated.
Short HighlightThis is a very short (one minute) montage of some of the footage that I shot at the show & conference. In future shows, I absolutely need to insert clips here and there of engineers saying a few words about the conference (why they...
Crowdfunding Articles?
Many of you have the knowledge and talent to write technical articles that would benefit the EE community. What is missing for most of you though, and very understandably so, is the time and motivation to do it.
But what if you could make some money to compensate for your time spent on writing the article(s)? Would some of you find the motivation and make the time?
I am thinking of implementing a system/mechanism that would allow the EE community to...
New Code Snippet Section
Following the success of the code snippet section on DSPRelated.com, I am happy today to announce the launch of the code snippet section on EmbeddedRelated.com.
If you have a piece of code that you would like to share with the Embedded Systems community, please go ahead and fill the form.
If the piece of code you submit is approved, you will be sent $10 through Paypal.
If...
Code Snippets Winners Announced
Wow, thanks a lot for all the code snippets - I am pleasantly surprised by the quality of the code that has been shared and I am very grateful.
Now, as you know, to give momentum to the section I had announced a special reward program for code snippets submitted by the end of March.
The partner members and I had a very hard time selecting the 5 "most useful" snippets out of the more than 50 who have been submitted.
Here's our selection:
Behold, the New Comments System!
I have just finished implementing a new system for commenting the blogs. It uses Ajax extensively, so the page won't reload if you post a comment. And it is a 'threaded' system, which means that if you post a reply to a comment, it will be attached to it.
What do you think? I personally love it. Please go ahead and test it with a quick comment.
Although it is better to be logged in to post a comment, non-registered users can also comment, but they will have...
Blogs Section Now Online!
I am happy to announce that the blog section is now online.
Last week, I sent an email to all the members of EmbeddedRelated.com to ask for embedded systems experts who would be interested in blogging on the site. The response was very positive and I have selected 10 highly qualified individuals who will soon be writing here about all sorts of embedded systems related subjects. I am currently in the process of receiving their info (bio, photo, username, etc) and creating their bloggers'...
Favorite Software AND Hardware Tools for Embedded Systems Development
Last year, at the Embedded Online Conference, we interviewed the speakers and asked them what were some of their favorite software and hardware tools for Embedded development.
We aggregated all their answers in one insightful video that you can watch here.
Although you should really watch the video in order to get the full picture, I've compiled the following non-exhaustive list for the fun of it (again, I cannot overstate enough how much valuable...
Free Sessions @ the 2023 Embedded Online Conference
Although the 2023 Embedded Online Conference will officially start only on Monday 04/24, today we are pre-releasing all Theatre Talks and Demos in order to give attendees a headstart over the weekend on a very busy program.
The good news is, you don't need a paid registration to access theatre talks and demos. All you have to do is create an account on the EOC website and skip the payment part.
Here are the 37 sessions that you can watch for...
Announcing the 2021 Embedded Online Conference!
Once again this year, Jacob Beningo and I are putting together the Embedded Online Conference. Last year's edition was a very rewarding experience, with over 6,000 registrants, fantastic & insightful talks, and lots of positive feedback. For this year's edition, we are delighted to announce that none other than Jack Ganssle will be giving a Keynote presentation about the 50th anniversary of the Microprocessor.
The 2021 Embedded Online Conference will...
Collaborative Writing Experiment: What are your favorite Embedded Systems Online Resources?
Edit 22/05 - Wow, this went better than expected. I will try submitting this blog post to Reddit/ece and see if we can get a few more interesting links before I close the document. Thanks to everyone who contributed!
_______
Edit 28/05 - The document is now closed to editing. If there is a link that you would like to see added, please use the comment system at the end of this blog. Thanks to all who participated!
Up next, Free...
Call for Bloggers!
Are you passionate about embedded systems? Do you have valuable insights, tips, or stories to share with the embedded community? Do you want to reach a large and engaged audience of embedded enthusiasts and professionals? We are currently looking at adding a few more inspired writers to our team of bloggers.
The New Forum is LIVE!
After months of hard word, I am very excited to introduce to you the new forum interface.
Here are the key features:
1- Easily add images to a post by drag & dropping the images in the editor
2- Easily attach files to a post by drag & dropping the files in the editor
3- Add latex equations to a post and they will be rendered with Mathjax (tutorial)
4- Add a code snippet and surround the code with
Embedded Online Conference 2021 - Watch the Speakers Share their Thoughts on the Value for Attendees
Over the last few weeks, we've had a chance to chat with some of the speakers at the upcoming Embedded Online Conference. We asked them to share their thoughts on conferences and the Embedded Online Conference in particular. Here are their answers edited together in one video:
If you are not registered yet for the conference but are considering it, please make sure to use the promo code ER149 to save more than 40% on your registration...
DSPRelated and EmbeddedRelated now on Facebook & I will be at EE Live!
I have two news to share with you today.
The first one is that I finally created Facebook pages for DSPRelated.com and EmbeddedRelated (DSPRelated page - EmbeddedRelated page). For a long time I didn't feel that this was something that was needed, but it seems that these days more and more people are using their Facebook account to stay updated with their favorite websites. In any event, if you have a Facebook account, I would greatly appreciate if you could use the next 5 seconds to "like"...
Success Story
A blog post has just broken the all-time record for the number of pageviews in 24 hours on the related sites. The blog post in question is titled Data Hiding in C and was written by Stephen Friederichs. It has been viewed by more than 7000 individuals since its publication a few days ago.
One reason that explains the success of this blog post is the wide appeal of the subject of the article (c programming) which allowed me to
2022 Embedded Online Conference - Final Push!
With the Embedded Online Conference only a couple of weeks away, we are now doing a final push to ensure that as many engineers as possible who could benefit from the conference are aware of it.
If you'd like to help us spread the word, not only will you make our day, but you'll also earn a chance to win one of TWO Saleae Logic Pro 8.
Prize: TWO Saleae Logic Pro 8Raffle...