
Forums
Forums Update, Tips and Tricks - Please Read!

It's been a few months since the launch of the new forums. Here are a few thoughts.
The thumbsup and beer buttons
If there is one thing that could have a...
Problem on connecting OV5640 Camera with I2C Master

Hi There,Problem Statement:When we connect OV5640 camera with I2C master (not SCCB) it should not send an ACK on the 9th clock cycle and, therefore, should not work...
How to program multiple number of STM32C011J6 microcontroller boards

We want to program multiple number of STM32C011J6 microcontroller boards at SMT stage in production line . We look for a suitable suggestion to program volume...
I couldn't get WiFi working on the new Pico 2 W using MicroPython available from Raspberry Pi. An implementation that does work has been developed by Pimoroni and...
Hello Team,I hope this message finds you well. I am currently working on a project involving flashing nRF52 chips using the BeagleBone Black, and I would like to...
Baudrate mismatch of a single node on the CAN Bus

I have a CAN-FD bus with multiple nodes communicating with a master node. One of the nodes has a faulty oscillator connected to the CAN-FD controller. The oscillator...
PHD ULTRA syringe Pump integrate with Arduino

I have a PHD ULTRA syringe pump from Harvard Apparatus. I want to establish communication between an Arduino and the syringe pump. The company provided me with a...
Concepts around HAL/BSP/OS composition

Recently, I started a project in which the main goal is to wrap vendor specific drivers into a HAL so that I can use them among of vendor chips, I have it nailed...
Designing a circuit with a microcontroller and a crystal or resonator there should some measures done to ensure the oscillator runs stable and reliable in mass...
Please login (on the right) if you already have an account on this platform.
Otherwise, please use this form to register (free) an join one of the largest online community for Electrical/Embedded/DSP/FPGA/ML engineers:
