Forums
Hello,I have been developing a C language software for software oscilloscope which is part of a control software. From timing point of view the software consists...
I have STM8 based hardware design. But I am not able to decide what interface I should expose to program it with Arduino. It has UART, SPI, etc interfaces.What...
Crosscompiling for ARM926EJ-s device with hardware float operations support
Started by 4 years ago●4 replies●latest reply 4 years ago●938 viewsI need to cross compile c++ code for an embedded device with the specs shown below with hardware float operations support. Cross compiling from Ubuntu 20.04 without...
How to resolve hardware resource conflict in Multi-core embedded system?
Started by 4 years ago●1 reply●latest reply 4 years ago●142 viewsOur application is Advanced Drive Assist Systems(ADAS). Our Electronic Control Unit(ECU) contains Two Renesas RH850 / U2A16 Microcontrollers. Each microcontroller...
Is char signed/unsigned and is >> on signed defined?
Started by 4 years ago●34 replies●latest reply 4 years ago●119 viewsHi chaps and chapesses -- sorry to bug you again -- this is a follow-on to my previous question: What size variables are best for 8-bit, 16-bit, and 32-bit MCUs?...
Raspberry Pi to MPC5744p over SPI
Started by 4 years ago●2 replies●latest reply 4 years ago●178 viewsHello,I am currently trying to get SPI data transfer between the MPC5744p and a Raspberry Pi 4 to work.I'm using the SPIdev python toolkit to send the value 26 over...
failure to wake up LPC2148 from power down mode
Started by 4 years ago●4 replies●latest reply 4 years ago●98 viewsHello Community,
I have been trying to implement the power down mode in LPC2148 controller. The problem is once it enters the power down mode, it is unable to wake-up...
Hi people!Inspired by a recent thread started by @MaxMaxfield ( https://www.embeddedrelated.com/thread/11327/is-char-signed-unsigned-and-is-on-signed-defined?pw=Amxh9...
What size variables are best for 8-bit, 16-bit, and 32-bit MCUs?
Started by 4 years ago●16 replies●latest reply 4 years ago●3405 viewsHi there – I have a conundrum rattling around my head. I once read that an MCU is most efficient when its working with its natural word width. On one level...
LinkIt Smart 7688 - serial port doesn't work
Started by 4 years ago●3 replies●latest reply 4 years ago●521 viewsWe work with a LinkIt Smart 7688 development board (based on an MT7688 SoC) powered by OpenWRT and faced issues with accessing serial ports from Linux. Debug console...
Please login (on the right) if you already have an account on this platform.
Otherwise, please use this form to register (free) an join one of the largest online community for Electrical/Embedded/DSP/FPGA/ML engineers: