Forums
How to write professional looking test document ?
Started by 7 years ago●6 replies●latest reply 7 years ago●109 viewsSample Test CasesAttached is sample test cases document. What is the best program to write test cases professionally, with very nice fonts,...
not able to ssh into embedded linux board
Started by 7 years ago●12 replies●latest reply 7 years ago●3009 viewsHi guys,
I am facing a problem while implementing the SSH connection to my board and I am just one step away from my goal.
Actually the problem statement is as...
CHECKING WHETHER RS 485 IS WORKING
Started by 7 years ago●8 replies●latest reply 7 years ago●695 viewsInorder to check my rs 485 port,i had connected my lpc2378 (rs485) with my PC through ADAM-4561(1 port isolated USB to RS 232/422 485converter).Now how to check...
What is Vehicle Battery Voltage when shutdown completes ?
Started by 7 years ago●2 replies●latest reply 7 years ago●115 viewsA typical Powertrain Electronic Control Unit (ECU) is wired with Infineon Aurix Tricore TC29x Microcontroller. Embedded Software running in the ECU is in C language.Application...
Hello,I've a piezoelectric sensor and I have it hooked to the header J25 pin 8. The board (#FRDM-KW40Z) is usb powered. I'm using the adc16 demo code (from #nxp)...
checking whether RS 485 is working
Started by 7 years ago●3 replies●latest reply 7 years ago●723 viewsInorder to check my rs 485 port,i had connected my lpc2378 (rs485) with my PC through ADAM-4561(1 port isolated USB to RS 232/422 485converter).Now how to check...
Synchronizing access to shared bits array from several tasks
Started by 7 years ago●11 replies●latest reply 7 years ago●1354 viewsHello,I have been developing control software based on #FreeRTOS. I have divided thewhole software into several tasks (the first executed every 1 ms, the second...
Dear all,
I am new to LPC2378 (#LPC2300). Currently i am developing code for sending a character in serial port....Below i mentioned the code what i have written..but...
What are CANH and CANL reset initialization values when CAN Transceiver goes to sleep ?
Started by 7 years ago●4 replies●latest reply 7 years ago●345 viewsCAN TransceiverAttached is CAN Transceiver Datasheet. This IC is wired in our Microcontroller based Electronic Control Unit.What will be CAN High (CANH) and CAN...
LIN BUS output terminated to LIN supply voltage ?
Started by 7 years ago●1 reply●latest reply 7 years ago●100 viewsFollowing is link to LIN Transceiver Datasheet:https://www.infineon.com/dgdl/Infineon-TLE7258-DS-...Page 11 has the following statement:" The BUS output is terminated...
Please login (on the right) if you already have an account on this platform.
Otherwise, please use this form to register (free) an join one of the largest online community for Electrical/Embedded/DSP/FPGA/ML engineers:
