IrDA on LPC2100 ?

Started by Eric Fattah in LPC200013 years ago 2 replies

Does anyone know if the LPC2100 series has the capacity to do IrDA without an external IrDA encoder/decoder? Some newer MCUs like the...

Does anyone know if the LPC2100 series has the capacity to do IrDA without an external IrDA encoder/decoder? Some newer MCUs like the STR911/912 series have UART's which can do IrDA encoding/decoding as well (requiring only an LED transceiver). However it appears to me (at first glance) that the LPC2100 series doesn't have that capacity. Can anyone give feedback from implementing Ir...


Re: Tom's questions for Jaya

Started by Jayasooriah in LPC200014 years ago 1 reply

Hello lpc2100, I will answer you question assuming it is an open question: --- In lpc2000@lpc2..., "lpc2100" wrote: > Is it possible that...

Hello lpc2100, I will answer you question assuming it is an open question: --- In lpc2000@lpc2..., "lpc2100" wrote: > Is it possible that you erased the philips bootloader while reverse > engineering the bootloader. It is not possible to erase the boot loader by reading it out. All my reverse engineering was done using the hex file. > Can't you


RFID with LPC2100

Started by Marko Pavlin in LPC200013 years ago

Hello! Is there any (open) sample code for RFID reader application based on LPC2100? Marko

Hello! Is there any (open) sample code for RFID reader application based on LPC2100? Marko


GCC & LPC2100

Started by Andreas Schwarz in LPC200016 years ago 1 reply

Hello, is there a howto for GCC + LPC2100? I have built binutils, gcc and newlib under linux, what else do I need to really use...

Hello, is there a howto for GCC + LPC2100? I have built binutils, gcc and newlib under linux, what else do I need to really use the compiler for LPC2106 software development? init code? Linker script? Where do I get it, how do I use it? Is there anything else I have to take ca


PROGMEM equivalent for lpc2100?

Started by Kevin Townsend in LPC200011 years ago 4 replies

I am trying to port a basic USB CDC stack from an AT90USB162 to the LPC2148 (rather than paying for something like an FT232RL), and it seems on...

I am trying to port a basic USB CDC stack from an AT90USB162 to the LPC2148 (rather than paying for something like an FT232RL), and it seems on the atmel chips you can use PROGMEM to store variables in flash memory rather than using SRAM (which is good since the AT90USB162 only has 512 bytes of it). I was wondering if there is a straight forward way to do the same with an lpc2100? All of the d...


Footprint for LPC

Started by vrrraju in LPC200016 years ago 8 replies

Dear Friends, I am happy to see that one group is dedicated towards Philips LPC2100. I am trying to build a board based on...

Dear Friends, I am happy to see that one group is dedicated towards Philips LPC2100. I am trying to build a board based on Philips LPC2106. I am looking for the foot print and library for the LPC2100 for Eagle PCB. I have checked with cadsoft for the same but they haven't u


Procyon ARMlib-LPC2100 needed

Started by renguiluo in LPC200013 years ago 3 replies

Hi,all who can upload Procyon ARMlib-LPC2100, Thanks in advance!

Hi,all who can upload Procyon ARMlib-LPC2100, Thanks in advance!


Free BASIC interpreter for LPC2100

Started by varuzhandanielyan in LPC200014 years ago 3 replies

Does somebody know something about Free BASIC interpreter for LPC2100? Thanks vdaniel ------------------------ Yahoo! Groups Sponsor...

Does somebody know something about Free BASIC interpreter for LPC2100? Thanks vdaniel ------------------------ Yahoo! Groups Sponsor --------------------~--> Great things are happening at Yahoo! Groups. See the new email design. http://us.click.yahoo.com/TISQkA/hOaOAA/yQLSAA/dN_tlB/TM --------------------------------------------------------------------~->


Re: Tom's questions for Jaya

Started by Jayasooriah in LPC200014 years ago 2 replies

Tom, what you say does not appear to add up: >Message: 12 > Date: Fri, 24 Feb 2006 17:06:25 -0000 > From: "lpc2100" >Subject: Re: Tom's...

Tom, what you say does not appear to add up: >Message: 12 > Date: Fri, 24 Feb 2006 17:06:25 -0000 > From: "lpc2100" >Subject: Re: Tom's questions for Jaya > > > It is not possible to erase the boot loader by reading it out. All my > > reverse engineering was done using the hex file. > >Reverse engineering can also mea


lpc2100 group name/addresses have changed

Started by noti...@yahoogroups.com in LPC200016 years ago

Hello, The moderator of the lpc2100 group has changed the group's name. This means that both the group's email address and...

Hello, The moderator of the lpc2100 group has changed the group's name. This means that both the group's email address and the group home page location have changed. The group email address: The group home page location:


LPC2100 Wiki !?!

Started by Karl Olsen in LPC200015 years ago 4 replies

What happened to the LPC2100 Wiki? http://www.open-research.org. uk/ARMuC/index.cgi?LPC2100Tips Could somebody please undo this? ...

What happened to the LPC2100 Wiki? http://www.open-research.org. uk/ARMuC/index.cgi?LPC2100Tips Could somebody please undo this? Karl Olsen


Re: RFID with LPC2100

Started by Sreedevi in LPC200011 years ago 1 reply

=A0 Hello! Is there any (open) sample code for RFID reader application based on=20 LPC2129 or similar to that? sree =20 =20

=A0 Hello! Is there any (open) sample code for RFID reader application based on=20 LPC2129 or similar to that? sree =20 =20


lpc2100 book suggestions

Started by Sarath in LPC200010 years ago 12 replies

can anyone suggest me a book on complete reference to LPC2103. i need to finish my final year project. so kindly help...

can anyone suggest me a book on complete reference to LPC2103. i need to finish my final year project. so kindly help me guys!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


Re: [lpc2100] Delay routines

Started by Robert Adsett in LPC200016 years ago

At 12:21 PM 1/3/04 -0500, you wrote: >At 09:58 AM 1/2/04 -0800, you wrote: > > > >BTW, so far this will be entirely adequate for...

At 12:21 PM 1/3/04 -0500, you wrote: >At 09:58 AM 1/2/04 -0800, you wrote: > > > >BTW, so far this will be entirely adequate for my needs. I was just > >testing the lower boundary to see how it would perform... > >Great. I still think I'll make


Orcad Schematic Library for the LPC2100

Started by Asif Khan in LPC200010 years ago 2 replies

I am looking for an Orcad Schematic Library for the LPC21000 series MCU. Can anyone help me??? Asif Khan Manufacturing Engineering Bio-Rad...

I am looking for an Orcad Schematic Library for the LPC21000 series MCU. Can anyone help me??? Asif Khan Manufacturing Engineering Bio-Rad Laboratories


USB Device Class for MIDI - followup

Started by radim100 in LPC20009 years ago 5 replies

I was just wondering if anybody has some LPC214X or LPC2100 based MIDI USB Class code available to share . Thanks....

I was just wondering if anybody has some LPC214X or LPC2100 based MIDI USB Class code available to share . Thanks. Radim ------------------------------------


Usage of the Flash as Data EEPROM

Started by varuzhandanielyan in LPC200015 years ago 6 replies

Dear All, Is there somewhere availabe an example for LPC2100 how to use the flash for data storage? Thank you, ...

Dear All, Is there somewhere availabe an example for LPC2100 how to use the flash for data storage? Thank you, Varuzhan


Which GUI to use for programming/simulating

Started by TobiasRompf in LPC200015 years ago 5 replies

Hey Folks, what GUIs do you use to develeope your software for the LPC2100 series? I already worked the Keil, but it's...

Hey Folks, what GUIs do you use to develeope your software for the LPC2100 series? I already worked the Keil, but it's a little to expensive and the restricted evaluation version allows to few source-code (16kB) Maybe ther's a nice Freeware, Open-S


LPC2100 and USB programming

Started by Milos Prokic in LPC200015 years ago 7 replies

Hi everyone, I wanted to fabricate a board with the LPC210x that will have USB connectivity. I have found some simple chips that...

Hi everyone, I wanted to fabricate a board with the LPC210x that will have USB connectivity. I have found some simple chips that would definitely do the job - for example PDIUSBD12 which is a USB interface device with parallel bus. However, I don't think I would be able to bootstrap


System mode

Started by Michael Pont in LPC200016 years ago 3 replies

Hi, Can anyone tell me when I should expect to put an LPC2100 device into "system mode"? I can see one use (in systems...

Hi, Can anyone tell me when I should expect to put an LPC2100 device into "system mode"? I can see one use (in systems where there are multiple IRQ interrupts). Any other suggestions? Michael.