The Other Kind of Bypass Capacitor
There’s a type of bypass capacitor I’d like to talk about today.
It’s not the usual power supply bypass capacitor, aka decoupling capacitor, which is used to provide local charge storage to an integrated circuit, so that the high-frequency supply currents to the IC can bypass (hence the name) all the series resistance and inductance from the power supply. This reduces the noise on a DC voltage supply. I’ve...
It ain't heavy, it's my robot...
Unmanned Ground Vehicles - Design considerations for man-portable/packable vehicles
A UGV is “a ground based mechanical device that can sense and interact with its environment.” (Carlson, How)
A Field Robot is expected to work outdoors, though generally not in rain or snow, including rough terrain, dirt and dust. (Carlson, Reliability)
A Man-portable robot weighs less than 40 pounds, or is capable of being broken down into subassemblies for two soldiers weighing less than 40...
Unmanned Ground Vehicles - Design Considerations for Snow and Cold Environments
It's that time of year when the white stuff falls from the sky across the US, and with it comes lower temperatures. These conditions must be taken into consideration when designing a vehicle for outdoor use.
A few definitions from wikipedia:
Flurry: light, brief snowfall
Snow shower: intermittent snowfall
Light snow: over 1km visibility
Moderate snow: 0.5 to 1km visibility
Heavy snow: less than 0.5km visibility
Blizzard: lasts 3 hours or longer, sustained wind to 35mph, visibility...
Vala applications on Embedded Linux: maybe a clever choice [part 1]
Vala is a sexy, open source, high level programming language that appeared in 2006, it counts with a modern typing system, is object oriented, compiled and statically typed, it has a almost identical syntax to C# and is maintained by GNOME. The language was created as a power abstraction of the GLib and GTK libraries, two considerably lightweight and powerful libraries written in C, and it is used in projects such as GNOME Clocks, Shotwell, GXml and Elementary OS.
namespace...How to Succeed in Motor Control: Olaus Magnus, Donald Rumsfeld, and YouTube
Almost four years ago, I had this insight — we were doing it wrong! Most of the application notes on motor control were about the core algorithms: various six-step or field-oriented control methods, with Park and Clarke transforms, sensorless estimators, and whatnot. It was kind of like a driving school would be, if they taught you how the accelerator and brake pedal worked, and how the four-stroke Otto cycle works in internal combustion engines, and handed you a written...
Round Round Get Around: Why Fixed-Point Right-Shifts Are Just Fine
Today’s topic is rounding in embedded systems, or more specifically, why you don’t need to worry about it in many cases.
One of the issues faced in computer arithmetic is that exact arithmetic requires an ever-increasing bit length to avoid overflow. Adding or subtracting two 16-bit integers produces a 17-bit result; multiplying two 16-bit integers produces a 32-bit result. In fixed-point arithmetic we typically multiply and shift right; for example, if we wanted to multiply some...
Favorite Tools: C++11 User-defined literals
In many software domains units of measurement are frequently critical to the software's data processing requirements. Those same units, or rather the use of the wrong units, are often the source of bugs and disastrous mistakes. Although useful for other purposes, user-defined literals are an excellent addition to the C++11 standard and handy when working with units of measurement.
Suppose a device measures velocity. To help prevent errors, the software specification requires...
Surprising Linux Real Time Scheduler Behavior
I have recently been helping with embedded software design and development for a data acquisition and visualization device. The software executes within an embedded Linux context and consists of various animated user interfaces rendering the acquired data.
The data is received via a UART and a SPI connection. During project development we noticed poor UART data latency issues during heavy user interface animations. For this product to properly meet its acquisition requirements, the UART...
Favorite Tools - Look Up Tables
As we grow in our engineering careers, we must continually add new tools to our collective tool kits. One favorite tool in my toolkit will be obvious to many experienced embedded software engineers. I still remember learning this approach early in my career via code written by colleague David Starling. The tool in question:
Look up tablesLook up tables simplify code and improve firmware maintenance. What is a look up table? A look up table is often nothing more complex than a...
From bare-metal to RTOS: 5 Reasons to use an RTOS
Developers can come up with amazing and convoluted reasons to not use an RTOS. I have heard excuses ranging from they are too expensive (despite open source solutions) all the way to they aren’t efficient and use too much memory. In some circumstances some excuses are justified but there are many reasons why a developer should look to an RTOS to help with their real-time scheduling needs.
From bare-metal to RTOS Quick Links2022 Embedded Online Conference - Final Push!
With the Embedded Online Conference only a couple of weeks away, we are now doing a final push to ensure that as many engineers as possible who could benefit from the conference are aware of it.
If you'd like to help us spread the word, not only will you make our day, but you'll also earn a chance to win one of TWO Saleae Logic Pro 8.
Prize: TWO Saleae Logic Pro 8Raffle...Introduction to Microcontrollers - More Timers and Displays
Building Your World Around Timers
By now you have seen four different ways to use timers in your programs. Next we will look at some ways to produce the effect of multiple parallel streams of work in your program with the help of timers. This effect is only an appearance, not a reality, since a single microcontroller (one core) can only run a single thread of code. However, since microcontrollers are so fast in relation to a great many of the tasks to...
Voltage - A Close Look
My first boss liked to pose the following problem when interviewing a new engineer. “Imagine two boxes on a table one with a battery the other with a light. Assume there is no detectable voltage drop in the connecting leads and the leads cannot be broken. How would you determine which box has the light? Drilling a hole is not allowed.”
The answer is simple. You need a voltmeter to tell the electric field direction and a small compass to tell the magnetic field...
Margin Call: Fermi Problems, Highway Horrors, Black Swans, and Why You Should Worry About When You Should Worry
“Reports that say that something hasn’t happened are always interesting to me, because as we know, there are known knowns; there are things we know that we know. There are known unknowns; that is to say, there are things that we now know we don’t know. But there are also unknown unknowns — there are things we do not know we don’t know.” — Donald Rumsfeld, February 2002
Today’s topic is engineering margin.
XKCD had a what-if column involving Fermi...
C++ on microcontrollers 4 – input pins, and decoding a rotary switch
This blog series is about the use of C++ for modern microcontrollers. My plan is to show the gradual development of a basic I/O library. I will introduce the object-oriented C++ features that are used step by step, to provide a gentle yet practical introduction into C++ for C programmers. Reader input is very much appreciated, you might even steer me in the direction you find most interesting.
So far I...
VGA Output in 7 Slices. Really.
Ridiculous? Read on - I will show you how to generate VGA timing in seven XilinxR Spartan3R slices.Some time ago I needed to output video to a VGA monitor for my Apple ][ FPGA clone. Obviously (I thought), VGA's been done before and all I had to do was find some Verilog code and drop it into my design. As is often the case (with me anyway), the task proved to be very different from my imagined 'couple of hours to integrate the IP'.I found some example code for my board. I...
Introduction to Microcontrollers - Ada - 7 Segments and Catching Errors
7 Segments the Ada WayHere is the Ada version (I should say AN Ada version) of the 7 segment multiplexing code presented in the last installment. The hardware now is the STM32F407 Discover board, which is a Cortex M4F board. There are lots of differences in GPIO and timer setup, but if you understoold the previous code in C you should not have much trouble understanding this code in Ada.
As interesting as the Ada approach to the task is the Ada ability to detect...
Elliptic Curve Cryptography - Multiple Signatures
The use of point pairing becomes very useful when many people are required to sign one document. This is typical in a contract situation when several people are agreeing to a set of requirements. If we used the method described in the blog on signatures, each person would sign the document, and then the verification process would require checking every single signature. By using pairings, only one check needs to be performed. The only requirement is the ability to verify the...
Linear Feedback Shift Registers for the Uninitiated, Part IV: Easy Discrete Logarithms and the Silver-Pohlig-Hellman Algorithm
Last time we talked about the multiplicative inverse in finite fields, which is rather boring and mundane, and has an easy solution with Blankinship’s algorithm.
Discrete logarithms, on the other hand, are much more interesting, and this article covers only the tip of the iceberg.
What is a Discrete Logarithm, Anyway?Regular logarithms are something that you’re probably familiar with: let’s say you have some number \( y = b^x \) and you know \( y \) and \( b \) but...
StrangeCPU #3. Instruction Slides - The Strangest CPU Yet!
Summary:Decoding instructions with a Sliding Window system. 0-Bit Sliding Register Windows.
Table of Contents:- Part 1: A new CPU - technology review, re-examination of the premises; StrangeCPU concepts; x86 notes.
- Part 2: Sliding-Window Token Machines, an in-depth exploration of this curious technology; ARM notes.
- Part 3. Instruction Slides - The Strangest CPU Yet! Decoding instructions with a Sliding...
Implementation Complexity, Part II: Catastrophe, Dear Liza, and the M Word
In my last post, I talked about the Tower of Babel as a warning against implementation complexity, and I mentioned a number of issues that can occur at the time of design or construction of a project.
The Tower of Babel, Pieter Bruegel the Elder, c. 1563 (from Wikipedia)
Success and throwing it over the wallOK, so let's say that the right people get together into a well-functioning team, and build our Tower of Babel, whether it's the Empire State Building, or the electrical grid, or...
Going back to Germany!
A couple of blog posts ago, I wrote that the decision to go to ESC Boston ended up being a great one for many different reasons. I came back from the conference energized and really happy that I went.
These feelings were amplified a few days after my return when I received an email from Rolf Segger, the founder of SEGGER Microcontroller (check out their very new website), asking if I would be interested in visiting their headquarters...
Racing to Sleep
Today we’re going to talk about low-power design.
Suppose I’m an electrical engineer working with wildlife biologists who are gathering field data on the Saskatchewan ringed-neck mountain goat. My team has designed a device called the BigBrotherBear 2000 (BBB2000) with a trip cable and a motor and a camera and a temperature sensor and a hot-wire anemometer and a real-time clock and an SD card and a battery and a LoRa transceiver. The idea is something like...
Dark Corners of C - The Comma Operator
I've been programming in C for 16 years or so and the language has existed for much much longer than that. You might think that there'd be nothing left to surprise me after so long - but you'd be wrong. Imagine my surprise the first time I saw a line of code that looked something like this:
if (!dry_run && ((stdout_closed = true), close_stream (stdout) != 0))My mind couldn't parse it - what's a comma doing in there (after...
Linear Feedback Shift Registers for the Uninitiated, Part IV: Easy Discrete Logarithms and the Silver-Pohlig-Hellman Algorithm
Last time we talked about the multiplicative inverse in finite fields, which is rather boring and mundane, and has an easy solution with Blankinship’s algorithm.
Discrete logarithms, on the other hand, are much more interesting, and this article covers only the tip of the iceberg.
What is a Discrete Logarithm, Anyway?Regular logarithms are something that you’re probably familiar with: let’s say you have some number \( y = b^x \) and you know \( y \) and \( b \) but...
Who else is going to Sensors Expo in San Jose? Looking for roommate(s)!
This will be my first time attending this show and I must say that I am excited. I am bringing with me my cameras and other video equipment with the intention to capture as much footage as possible and produce a (hopefully) fun to watch 'highlights' video. I will also try to film as many demos as possible and share them with you.
I enjoy going to shows like this one as it gives me the opportunity to get out of my home-office (from where I manage and run the *Related sites) and actually...
Get your microcontroller and PC to talk
(and get it done free ‘n’ easy!)
The Need
Specifications can dynamically change during the product development cycle. Bosses/clients suddenly approach us with additional requirements, which, however simple, can put us in a fix. One such requirement could be to have a PC based design interface for a standalone microcontroller project.
On many occasions, the required PC software has to just behave like a slave...
Supply Chain Games: What Have We Learned From the Great Semiconductor Shortage of 2021? (Part 1)
So by now I’m sure you’ve heard about the semiconductor shortage of 2021. For a few complicated reasons, demand is greater than supply, and not everybody who wants to buy integrated circuits can do so. Today we’re going to try to answer some hard questions:
- Why are we in the middle of a semiconductor shortage?
- Why is it taking so long to get my [insert part number here]?
- Did this shortage suddenly sneak up on everybody? If not, what were the signs, and why...
Supply Chain Games: What Have We Learned From the Great Semiconductor Shortage of 2021? (Part 4)
Today we’re going to look at what’s been going on this past year in the chip shortage, particularly in the automotive markets. I’m going to share some recent events and statements that may shed some light on what’s been happening.
In Part Three we went through a deep dive on some aspects of Moore’s Law, the semiconductor foundries, and semiconductor economics, and we looked at the game Supply Chain Idle. We touched on a couple of important points about the...
3 Good News
Good News #1Last week, I announced a new and ambitious reward program that will be funded by the new Vendors Directory.
This week, I am happy to announce that we have our firsts two sponsors! Quantum Leaps & Abelon Systems have agreed to pay the sponsorship fee to be listed in the new Vendors Directory. Because of their support, there is now some money in the reward pool ($1,000) and enough to pay for the firsts 500 'beers' awarded. Please...
