For reference the posting we did on Dec 22 ---- 1) Am I right in assuming LPC2000 CRP is a software fence implemented in the supplied...

For reference the posting we did on Dec 22 ---- 1) Am I right in assuming LPC2000 CRP is a software fence implemented in the supplied boot loader code? Partially. It is a combination of Hardware and Software supplied in the bootloader code. Application running in micro has full access to the entire memory space. 2) I am going to replace

Hello, I am porting an application that uses freeRTOS from the LPC2000 family to the NXP Cortex M3. I use a custom board with an LPC1756,...

Hello, I am porting an application that uses freeRTOS from the LPC2000 family to the NXP Cortex M3. I use a custom board with an LPC1756, and Crossworks for MAC OS. I get a linker error with Crossworks and before I contact Rowley I would like to confirm this error is not specific to the demo project I am using. Crossworks works just fine for all the other projects I have, just not that one...

Hi all, Philips has engaged with ESAcademy again to provide a professional programming interface. This partner did an excellent job...

Hi all, Philips has engaged with ESAcademy again to provide a professional programming interface. This partner did an excellent job supporting the programming needs of the 8-bit microcontrollers and now also provides the utility FlashMagic for the ARM microcontrollers. Expect this utility to be updated regularly and be fast available with new devices. Mid term it will replace the Phi...

hi everyone, i have designed my own lpc2138 pcb=20 all the components are mounted on the pcb and are correct , i also have a switch at P0.14 to...

hi everyone, i have designed my own lpc2138 pcb=20 all the components are mounted on the pcb and are correct , i also have a switch at P0.14 to put the controller board . but the problem is that the controller is just not going into ISP mode . i am using LPC2000 Flash Utility V2.2.1. by PHILIPS=20 for communication purpose i have used MAX3232 and the capacitors on MAX3232= are 100nF each=2...

Hello, Please, i am trying to convert an executable generated from (keil and ADS 1.2) having the extension (.axf), i would like to convert it...

Hello, Please, i am trying to convert an executable generated from (keil and ADS 1.2) having the extension (.axf), i would like to convert it to intel extended format (.hex)to be able to download it via LPC2000 flash utility. Up until now, i tried with fromELF tool (ADS 1.2), but i didn't succeed, all your suggests are welcome, thank you :) ------------------------------------

Hello, I'm new in this group and a I need some help. I'm starting to learning Arm mcu lpc2000 family, i wanna know if can anyone explan me...

Hello, I'm new in this group and a I need some help. I'm starting to learning Arm mcu lpc2000 family, i wanna know if can anyone explan me how to load and run code in arm's sram Thanks ------------------------------------

Hi Dave, Eek. Very expensive. -- Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk CrossWorks for MSP430, ARM, AVR...

Hi Dave, Eek. Very expensive. -- Paul Curtis, Rowley Associates Ltd http://www.rowley.co.uk CrossWorks for MSP430, ARM, AVR and (soon) MAXQ processors > -----Original Message----- > From: dave_baker_100 [mailto:dave_baker_100@dave...] > Sent: 29 June 2005 21:55 > To: lpc2000

Hello, I have programmed arm7 in Windows, and now I'm moving to Linux Ubuntu. I have installed eclipse and other tools, but not the...

Hello, I have programmed arm7 in Windows, and now I'm moving to Linux Ubuntu. I have installed eclipse and other tools, but not the GNUARM toolchain, which I use to compile Philips LPC2000 MCU software. I have download the binary of GCC-3.4 toolchain, and extract it to /usr/share/gnuarm (binutils-2.15, gcc-3.4.3-c-c++-java, newlib-1.12.0, insight-6.1, TAR BZ2 [56.0MB]). I also put there th...

Hi, I'm using IAR workbench with an olimex lpc2468 board, I was trying to write the .hex file using the flashMagic, I was able to download it...

Hi, I'm using IAR workbench with an olimex lpc2468 board, I was trying to write the .hex file using the flashMagic, I was able to download it before without problem, but now when I try to use the flashmagic tool. i get the message failed to autobaud ! when I try to download the program with JTAG, usin IAR I can download it with success but, I run steps in debugging mode but it seems that code is ...

Hi, I added the first version of my LPC17xx eagle library in the files section . It would be nice to have a simple base schematic with...

Hi, I added the first version of my LPC17xx eagle library in the files section . It would be nice to have a simple base schematic with BOM available at farnell or something. Please feel free to use it. Not verified yet so please check pinouts etc and let me know if anything is wrong, also feel free to add other common

Dear Philips Apps Team: I want to know if it is required to attach a 7-bit crcs and 1 bit stop bit to the command you sent to detect the...

Dear Philips Apps Team: I want to know if it is required to attach a 7-bit crcs and 1 bit stop bit to the command you sent to detect the card (RDID command)? --- In lpc2000@lpc2..., "philips_apps" wrote: > > Hello Malcom, > > Apart from the fact that the SSP supports several different seri

Dear LPC2000 Group, this is my first message, and I started some months ago using the LPC microcontrollers. I use the IAR 4.40A Compiler,...

Dear LPC2000 Group, this is my first message, and I started some months ago using the LPC microcontrollers. I use the IAR 4.40A Compiler, and the LPC2138. I?m testing both types of interrupts. The VIC is OK, working properly. I put three VICs to work at the same time: TIMER1, RTC Increment Interrupt and RTC Alarm Interrupt. Now, I want to program a interrupt to work as FIQ. So, I t...

The 16bit spi is only possible with LPC2106/01, If you set SPCR for 16 bit spi by setting bit2=1 and bits11:8=0000 then you will get a 16...

The 16bit spi is only possible with LPC2106/01, If you set SPCR for 16 bit spi by setting bit2=1 and bits11:8=0000 then you will get a 16 bit result in the SPDR register. If you have LPC2106 then the transfer width is fixed to 8bit. Alex ----- Original Message ----- From: Ananda Regmi To: l...@yahoogroups.com Sent: Wednesday, June 15, 2011 1:14 AM Subject: [lpc2000] LPC...

I have a board containing an LPC2138. I cannot get the chip to come out of bootloader mode or at least that is what I think is happening. I...

I have a board containing an LPC2138. I cannot get the chip to come out of bootloader mode or at least that is what I think is happening. I can load programs with no errors through a Keil ULINK but when I go into debug, the code I see starting at address 0 is not my code but instead is a mirror of the bootloader. I can also use the LPC2000 Flash Utility to load the chip, examine the buf...

Hi all, i m trying to connect arm7tdmi-s development board with H-JTAG,its showing connected but when i try to program it ,it shows "can't halt...

Hi all, i m trying to connect arm7tdmi-s development board with H-JTAG,its showing connected but when i try to program it ,it shows "can't halt target and make it in debug state" .I changed so many thing but unsuccessful.Fro serial flash utility it is not even detecting the board.when trying to blank check,"operation failed:failed to auto baud-step 1" comes..My LPT & COM port both r working.pleas...

I'm trying to get the LPCUSB VCOM example working using interrupts, but am having a strange problem. I have the Olimex LPC-H2148, Crossworks...

I'm trying to get the LPCUSB VCOM example working using interrupts, but am having a strange problem. I have the Olimex LPC-H2148, Crossworks v1.6 Build 2, and a Wiggler clone for JTAG. Here's what I did to set up and modify the project: 1) Create a new project: Type: Philps LPC2000/Generic LPC21xx Board/Executable Target Processor: LPC2148 All other options default 2) in Syste...

Dear all, What is the maximum ethernet transmission rate of LPC2000 family. If I use LPC2478 at 72MHz clock rate and DP83848 100/10M Ethernet...

Dear all, What is the maximum ethernet transmission rate of LPC2000 family. If I use LPC2478 at 72MHz clock rate and DP83848 100/10M Ethernet PHY, what is the maximum actual ethernet transmission rate? Hope to hear from you Thank you ------------------------------------

I'm making a board with multiple LPC2000 series chips on it. Can I somehow share one JTAG connector for all the chips or do I have to have one...

I'm making a board with multiple LPC2000 series chips on it. Can I somehow share one JTAG connector for all the chips or do I have to have one connector per chip if I intend to use JTAG?

Hi In a previous thread: http://tech.groups.yahoo.com/group/lpc2000/message/40140 I mentioned that I am trying to implment a secondary...

Hi In a previous thread: http://tech.groups.yahoo.com/group/lpc2000/message/40140 I mentioned that I am trying to implment a secondary bootloader with an LPC2148 device. I'm having some problems with the interrupt vector table. I've set the register "MEMMAP" to 0x02 to remap interrupt vectors to RAM. Do I need to copy an interrupt vector table to RAM, and if so how do I do it? I'm u...

Good afternoon, I have an LPC2103 and my bootup code sets the MAM and PLL. The thing is, I must have set it incorrectly because I cannot...

Good afternoon, I have an LPC2103 and my bootup code sets the MAM and PLL. The thing is, I must have set it incorrectly because I cannot seem to get my Olimex to connect to it anymore. 12MHz crystal, PLL set to 60MHz with M=4 P=1 (0x24). MAM set to 4. My openocd configuration for the LPC2103 and Olimex was one I'd taken from the internet: # LPC2000 -> SRST causes TRST reset_confi