Simple Automated Log Processing
Text log data offers a wealth of information from an embedded system. At least during prototyping and development phases, most systems have some kind of serial log output, or use semihosting methods to log to a serial output channel in a debugger. Then you can capture the logs to a file.
The problem is that they tend to accumulate large volumes of data. Logs can be many thousands of lines long, especially when you run long duration tests. Finding information and evaluating trends in the...
Scorchers, Part 2: Unknown Bugs and Popcorn
This is a short article about diminishing returns in the context of software releases.
Those of you who have been working professionally on software or firmware have probably faced this dilemma before. The scrum masters of the world will probably harp on terms like the Definition of Done and the Minimum Viable Product. Blah blah blah. In simple terms, how do you know when your product is ready to release? This is both an easy and a difficult question to answer.
What makes...
Some Advice For Working From Home
The other day I posted a short video of my WFH setup (and here's a May 1st upgrade). Today I have some general advice for WFH for people who are new to it.
I've been doing it randomly for the past 5 years, usually just one or two days a week here and there. Now it's a full-time thing for the duration of the coronavirus. So some of this wanders afield a bit, settling in for the long haul.
Some of it is based on things I've built up over years. It's unreasonable to expect that...
UML Statechart tip: Handling errors when entering a state
This is my second post with advice and tips on designing software with UML statecharts. My first entry is here.
It has been nearly 20 years since I first studied UML statecharts. Since that initial exposure (thank you Samek!), I have applied event driven active object statechart designs to numerous projects [3]. Nothing has abated my preference for this pattern in my firmware and embedded software projects. Through the years I have taken note of a handful of common challenges when...
Examining The Stack For Fun And Profit
Well, maybe not so much for profit, but certainly for fun. This is a wandering journey of exploration and discovery, learning a variety of interesting and useful things.
One of the concerns with an embedded system is how much memory it needs, known as the memory footprint. This consists of the persistent storage needed for the program (i.e. the flash memory or filesystem space that stores the executable image), and the volatile storage needed to hold the data while executing over long...
Already 3000+ Attendees Registered for the Upcoming Embedded Online Conference
Chances are you already know, through the newsletter or banners on the Related sites, about the upcoming Embedded Online Conference.
Chances are you also already know that you have until the end of the month of February to register for free.
And chances are that you are one of the more than 3000 pro-active engineers who have already registered.
But If you are like me and have a tendency to do tomorrow what can be done today, maybe you haven't registered yet. You may...
So You Want To Be An Embedded Systems Developer
Contents:- Introduction
- What's An Embedded System?
- Hobbyist vs. Professional Hardware
- The Primary Resources
- Some Advanced Resources
- Some Hardware
- Glossaries
- Other Links
- Final Thought
Racing to Sleep
Today we’re going to talk about low-power design.
Suppose I’m an electrical engineer working with wildlife biologists who are gathering field data on the Saskatchewan ringed-neck mountain goat. My team has designed a device called the BigBrotherBear 2000 (BBB2000) with a trip cable and a motor and a camera and a temperature sensor and a hot-wire anemometer and a real-time clock and an SD card and a battery and a LoRa transceiver. The idea is something like...
Jaywalking Around the Compiler
Our team had another code review recently. I looked at one of the files, and bolted upright in horror when I saw a function that looked sort of like this:
void some_function(SOMEDATA_T *psomedata) { asm volatile("push CORCON"); CORCON = 0x00E2; do_some_other_stuff(psomedata); asm volatile("pop CORCON"); }There is a serious bug here — do you see what it is?
Shibboleths: The Perils of Voiceless Sibilant Fricatives, Idiot Lights, and Other Binary-Outcome Tests
AS-SALT, JORDAN — Dr. Reza Al-Faisal once had a job offer from Google to work on cutting-edge voice recognition projects. He turned it down. The 37-year-old Stanford-trained professor of engineering at Al-Balqa’ Applied University now leads a small cadre of graduate students in a government-sponsored program to keep Jordanian society secure from what has now become an overwhelming influx of refugees from the Palestinian-controlled West Bank. “Sometimes they visit relatives...
Zephyr: West Manifest For Application Development
In this blog post, I show a simpler way to create custom West manifest files. This technique eliminates the need to duplicate the complex West manifest from upstream Zephyr. I also show how we can use the West manifest to include out-of-tree board and SoC definitions, and include our own out-of-tree drivers.
FPGA skills for the modern world
With the ever increasing number of applications involving video processing, AI or edge computing the appetite for suitably skilled FPGA Engineers has never been higher from the market which is expected to grow to $15 billion USD by 2027!
In terms of industries opportunities can be typically found within:
- Automotive
- Aerospace
- Defense
- Data Processing
However this list is certainly not exhaustive as any application requiring algorithms which can leverage from highly parallel and...
Shibboleths: The Perils of Voiceless Sibilant Fricatives, Idiot Lights, and Other Binary-Outcome Tests
AS-SALT, JORDAN — Dr. Reza Al-Faisal once had a job offer from Google to work on cutting-edge voice recognition projects. He turned it down. The 37-year-old Stanford-trained professor of engineering at Al-Balqa’ Applied University now leads a small cadre of graduate students in a government-sponsored program to keep Jordanian society secure from what has now become an overwhelming influx of refugees from the Palestinian-controlled West Bank. “Sometimes they visit relatives...
C to C++: Bridging the Gap from C Structures to Classes
In our last post, C to C++: Proven Techniques for Embedded Systems Transformation, we started to discuss the different ways that C++ can be used to write embedded software. You saw that there is no reason to be overwhelmed by trying to adopt complex topics like metaprogramming out of the gate. An important concept to understand is that you can make the transition gradually into C++ while still receiving the many benefits that C++ has to offer.
One of the first...
Introduction to Microcontrollers - Button Matrix & Auto Repeating
Too Many Buttons, Not Enough Inputs
Assigning one GPIO input to each button can use up a lot of GPIO pins. Numeric input requires at least 10 buttons, plus however many additional control or function buttons. This can quickly get expensive, GPIO pin-wise, and also connector-wise if the keypad is off the uC PCB as it often would be. A very common response to this expense is to wire buttons (keys, etc) in a matrix. By connecting our buttons in an...
Linear Feedback Shift Registers for the Uninitiated, Part VII: LFSR Implementations, Idiomatic C, and Compiler Explorer
The last four articles were on algorithms used to compute with finite fields and shift registers:
- multiplicative inverse
- discrete logarithm
- determining characteristic polynomial from the LFSR output
Today we’re going to come back down to earth and show how to implement LFSR updates on a microcontroller. We’ll also talk a little bit about something called “idiomatic C” and a neat online tool for experimenting with the C compiler.
Mathematics and Cryptography
The mathematics of number theory and elliptic curves can take a life time to learn because they are very deep subjects. As engineers we don't have time to earn PhD's in math along with all the things we have to learn just to make communications systems work. However, a little learning can go a long way to helping make our communications systems secure - we don't need to know everything. The following articles are broken down into two realms, number theory and elliptic...
Interfacing LINUX with microcontrollers
Introduction
I am increasingly asked to work on small spare time projects where a user needs to control some device over the INTERNET. Recently, a friend needed to control heater relays and measure the temperature of its geographically distant secondary house. Another case relates to the control of a pan tilt home monitoring camera. A last one is the control of an old XY plotter DACs.
In both applications, the user wants to access the system over a web browser using HTTP. From the user...
Voltage - A Close Look
My first boss liked to pose the following problem when interviewing a new engineer. “Imagine two boxes on a table one with a battery the other with a light. Assume there is no detectable voltage drop in the connecting leads and the leads cannot be broken. How would you determine which box has the light? Drilling a hole is not allowed.”
The answer is simple. You need a voltmeter to tell the electric field direction and a small compass to tell the magnetic field...
Wye Delta Tee Pi: Observations on Three-Terminal Networks
Today I’m going to talk a little bit about three-terminal linear passive networks. These generally come in two flavors, wye and delta.
Why Wye?The town of Why, Arizona has a strange name that comes from the shape of the original road junction of Arizona State Highways 85 and 86, which was shaped like the letter Y. This is no longer the case, because the state highway department reconfigured the intersection
Embedded World 2018 - The Interviews
Once again this year, I had the chance to go to Embedded World in Nuremberg Germany. And once again this year, I brought my video equipment to try and capture some of the most interesting things at the show.
Something new this year, I asked Jacob Beningo if he would partner with me in doing interviews with a few vendors. I would operate the camera while Jacob would ask the right questions to the vendors to make them talk about the key products/features that...
Watchdog Timer Anti-patterns
The humble watchdog timer has been an essential part of our reliability tool chest for decades now. The way it works is straightforward and easy to understand, and most practical designs are easy to interface with.
There is a wealth of reference material that covers both the theory behind watchdog timers and practical design tips. But what we'll talk about today is of a slightly different nature.
Despite its straightforward operation and long history, the watchdog timer does occasionally get...
Mutex vs. Semaphores – Part 2: The Mutex & Mutual Exclusion Problems
Part 1 of this series we looked at the history of the binary and counting semaphore, and then went on to discuss some of the associated problem areas. In this posting I aim to show how a different RTOS construct, the mutex, may overcome some, if not all, of these weaknesses.
To address the problems associated with semaphore, a new concept was developed during the late 1980’s. I have struggled to find it’s first clear definition, but the major use of the term mutex (another...
Getting Started With Zephyr: Devicetree Overlays
In this blog post, I show how the Devicetree overlay is a valuable construct in The Zephyr Project RTOS. Overlays allow embedded software engineers to override the default pin configuration specified in Zephyr for a particular board. In this blog post, I use I2C as an example. Specifically, I showed the default I2C pins used for the nRF52840 development kit in the nominal Zephyr Devicetree. Then, I demonstrated how an overlay can be used to override this pin configuration and the final result.
Use Microprogramming to Save Resources and Increase Functionality
Introduction
Microprogramming is a design approach that every FPGA designer should have in their bag of tricks. I subscribe to the concept that microprogramming is a structured approach to the design of state machines. This is essentially the view of Maurice Wilkes when he first proposed microprogramming in 1951 as an alternative method for the implementation of the control section of a computer. Wilkes was interested in improving the reliability and reducing time needed to implement...
Margin Call: Fermi Problems, Highway Horrors, Black Swans, and Why You Should Worry About When You Should Worry
“Reports that say that something hasn’t happened are always interesting to me, because as we know, there are known knowns; there are things we know that we know. There are known unknowns; that is to say, there are things that we now know we don’t know. But there are also unknown unknowns — there are things we do not know we don’t know.” — Donald Rumsfeld, February 2002
Today’s topic is engineering margin.
XKCD had a what-if column involving Fermi...
Linear Feedback Shift Registers for the Uninitiated, Part XIII: System Identification
Last time we looked at spread-spectrum techniques using the output bit sequence of an LFSR as a pseudorandom bit sequence (PRBS). The main benefit we explored was increasing signal-to-noise ratio (SNR) relative to other disturbance signals in a communication system.
This time we’re going to use a PRBS from LFSR output to do something completely different: system identification. We’ll show two different methods of active system identification, one using sine waves and the other...
Voltage Drops Are Falling on My Head: Operating Points, Linearization, Temperature Coefficients, and Thermal Runaway
Today’s topic was originally going to be called “Small Changes Caused by Various Things”, because I couldn’t think of a better title. Then I changed the title. This one’s not much better, though. Sorry.
What I had in mind was the Shockley diode equation and some other vaguely related subjects.
My Teachers Lied to MeMy introductory circuits class in college included a section about diodes and transistors.
The ideal diode equation is...
Embedded World 2018 - More Videos!
After the interview videos last week, this week I am very happy to release two more videos taken at Embedded World 2018 and that I am proud of.
For both videos, I made extensive use of my two new toys, a Zhiyun Crane Gimbal and a Sony a6300 camera.
The use of a gimbal like the Zhiyun makes a big difference in terms of making the footage look much more stable and cinematographic.
As for the Sony camera, it takes fantastic slow-motion footage and...
