Does anyone out there know about a decent c compiler which targets the pic18 family? So far, I played with the Sourceboost C compiler and the...

Does anyone out there know about a decent c compiler which targets the pic18 family? So far, I played with the Sourceboost C compiler and the Microchip C18 compiler, I'm happy with none of these, am willing to spend some money on something really good, but won't waste my time on buying and trying... -- Grinnikend door het leven...

Is codewarrior a good compiler to use for HC08 controllers. I have heard some negative things about it. Is there a better compiler to use. I am...

Is codewarrior a good compiler to use for HC08 controllers. I have heard some negative things about it. Is there a better compiler to use. I am getting ready to start an HC08 project and need to choose a compiler. Jim

Hi All, Need your help, I have problem /w IAR compiler working with MSP430. I've got the project or "work space"from co-worker and I...

Hi All, Need your help, I have problem /w IAR compiler working with MSP430. I've got the project or "work space"from co-worker and I continue to develop the it. In the project we have a 2d array,... so far the it compiler and works properly. However, I've now reached the point that if I add one more row of data (128 bytes per each row), the compiler STILL compiler with no warning or ...

I'm looking for compile ucos-ii RTOS port to the Philips LPC2129 with the GNU Compiler. The code available on www.micrium.com site is, instead,...

I'm looking for compile ucos-ii RTOS port to the Philips LPC2129 with the GNU Compiler. The code available on www.micrium.com site is, instead, intended to be used with the IAR Compiler. First of all, I need to translate the assembly code for IAR Compiler to the GNU Compiler syntax (GAS, if I am not wrong), and I'm searching for a IAR Assembly User Guide but without success. Am I not able or...

Hi A colleague of mine is using MPLAB C compiler and is struggling with the saving of registers in ISRs. Apparently the compiler manual...

Hi A colleague of mine is using MPLAB C compiler and is struggling with the saving of registers in ISRs. Apparently the compiler manual says you have to manually scan the assembler code generated by the compiler to work out what registers to save/restore in interrupt routines. His software is crashing and he appears to be struggling to solve the problem. Does anyone have any exper...

I am trying to find a C-Compiler for a cipherLabs CPT-8000 batch barcode scanner, I am doing a project for uni and I need to program one of...

I am trying to find a C-Compiler for a cipherLabs CPT-8000 batch barcode scanner, I am doing a project for uni and I need to program one of these units using C, the compiler however costs a couple of hundred dollars which i am unable to afford. I know that the unit runs on a TOSHIBA TLCS-900 16-bit MCU and that I need the compiler from toshiba. If anyone knows one knows where i can get a c...

We are currently using an 18 year old version (3.x) of Introl-C that runs under DOS. A 6809 C compiler (+assembler,etc) is needed to maintain...

We are currently using an 18 year old version (3.x) of Introl-C that runs under DOS. A 6809 C compiler (+assembler,etc) is needed to maintain and update code for our 6809-based card. (And NO, I can't get our product updated to a newer CPU!) I've run into a number of compiler crashes. Sometimes the compiler complains that it has an internal error, and sometimes it hangs the PC and I'm forc...

Hello, I just inherited a project running on a Z80, which is built with a compiler called 'c80.exe' : 2500 A.D. Z80 C Compiler ...

Hello, I just inherited a project running on a Z80, which is built with a compiler called 'c80.exe' : 2500 A.D. Z80 C Compiler Copyright (C) 1987 - Version 4.05c Does anybody happen to have any documentation about this compiler at hand ? I am mainly looking for flags to change warning levels, and information about pref-defined preprocessor symbols. Thanks a lot, _Ico ...

I'm currently attempting to build gcc-3.4.3 for an embedded PPC405/vxWorks platform. I'm building the cross-compiler on a Linux/i686 running...

I'm currently attempting to build gcc-3.4.3 for an embedded PPC405/vxWorks platform. I'm building the cross-compiler on a Linux/i686 running the Debian 3.1 distribution with a 2.6.8 kernel. The problem is that I'm compiling --with-headers={vxworks-path-goes-here} and in order for that to work, it needs several compiler switches added everytime it uses the generated compiler to compile lib...

I am currently using Microchips C Compiler and have found some large performance problems. I would like to switch to another vendor....

I am currently using Microchips C Compiler and have found some large performance problems. I would like to switch to another vendor. Does anyone have any recommendations for a DsPic compiler that generates fast ANSI standard code?

Could somebody provide me with info where to get GNU compiler for Cygwin for PowerPC target? What's usual practice? Do I need to download source...

Could somebody provide me with info where to get GNU compiler for Cygwin for PowerPC target? What's usual practice? Do I need to download source and compile it myself? Or is such compiler standard part of binary free distribution? Thanks.

Hi, i bought a mcb167-net eval-board from keil. with the uVision compiler i can load code < 4k (not enough). is there a compiler with...

Hi, i bought a mcb167-net eval-board from keil. with the uVision compiler i can load code < 4k (not enough). is there a compiler with (nearly) unlimited code size which works with my board??? perhaps, there is a compiler for linux... ??? best regards, lukas t.

Is there a GCC or any other open source C Compiler available for the Cypress PSoC? Not that $145 for the Image Craft PSoC Compiler is that...

Is there a GCC or any other open source C Compiler available for the Cypress PSoC? Not that $145 for the Image Craft PSoC Compiler is that expencive, but free means I don't have to get my bosses approval to start working with the PSoC. Thanks, Eric

Hi all: Anyone knows of a free C/C++ compiler that I could use with an Atmel STK500 board? I would like to use it under Linux, but a Windows...

Hi all: Anyone knows of a free C/C++ compiler that I could use with an Atmel STK500 board? I would like to use it under Linux, but a Windows compiler will be fine too. Please advise. Sonoman

I just posted an upgraded version of the ML1 Macro Driven Compiler (which is not ML/1 or ML/I) to 'www.ml1compiler.org'. ML1 is an extensable...

I just posted an upgraded version of the ML1 Macro Driven Compiler (which is not ML/1 or ML/I) to 'www.ml1compiler.org'. ML1 is an extensable macro cross compiler that runs on DOS and will compile for a variety of CPU's (you write the macros). Included are macro sets that define an simple low level object oriented DOS programming language (the language the compiler is written in). ...

Hi, Anyone out there using the Dynamic C compiler? If so, I have a question. Every so often I get into the situation where not #define ing...

Hi, Anyone out there using the Dynamic C compiler? If so, I have a question. Every so often I get into the situation where not #define ing something, or some other simple minded typo (such as leaving of a ";") lands me in a compiler error message from the math library, or some other system type library. Obviously, the problem is in one of my modules (or libraries), but it is IMPOSSIBLE to ...

Hello, I have a question regarding compiler optimization of a cross compiler GCC (m68k). We are using version 3.4.0. When activating compiler...

Hello, I have a question regarding compiler optimization of a cross compiler GCC (m68k). We are using version 3.4.0. When activating compiler optimization with the options =84- O1, -O2, - O3 =93 there is a number of individual optimization flags set in the background. With =84- O1 =93 there are, as in the GNU documentation described, at least 10 optimization flags (-funit-at-a-time, -fomit...

Hi All! I have two questions. 1. How to declare constants in code memory of the microcontroller using keil cross compiler? 2. How to...

Hi All! I have two questions. 1. How to declare constants in code memory of the microcontroller using keil cross compiler? 2. How to generate a single "nop" using c language in keil cross compiler? Best regards, Ishita

I'm in the process of choosing between either using Microchip's C18 compiler or the CCS compiler. I've read the comparisons as far as features...

I'm in the process of choosing between either using Microchip's C18 compiler or the CCS compiler. I've read the comparisons as far as features go and both are comparable although CCS does seem to have somewhat more features. But one of the really big factors is simply how big the developer communities compare. How much sample code is there on the web for both compilers. When I google the k...

Hi, Since there is a thread on "C friendly" architectures, I thought it might be interested to find out what sort of horrible architectures...

Hi, Since there is a thread on "C friendly" architectures, I thought it might be interested to find out what sort of horrible architectures compiler writers actually managed to create a C compiler for. (And what portion of the ISO C standard is/was not supported) I asked the question (emailed Plauger if I recall correctl) once, on why there is no "rotate" operator in C. ALL the architectu...