EmbeddedRelated.com

wiggler support tms470

Started by nands7 in comp.arch.embedded14 years ago

Hi I have successfully built a tms470r1a256 board.I would like to program and debug using rowley crossworks with parallel port wiggler. Any...

Hi I have successfully built a tms470r1a256 board.I would like to program and debug using rowley crossworks with parallel port wiggler. Any body having success using wiggler on tms470 device? Could you please post a tested schematic on tms470 device since there are so many wiggler schematics available? nands7 --------------------------------------- Posted through http:/...


Wiggler with OCD Commander and WRT54GL

Started by romar_mro in comp.arch.embedded17 years ago

Hi I am trying to use MacCraigor's OCD Commander (different versions: 2.2.9, 2.3.7 and 2.5.6) with a wiggler-clone JTAG interface (based...

Hi I am trying to use MacCraigor's OCD Commander (different versions: 2.2.9, 2.3.7 and 2.5.6) with a wiggler-clone JTAG interface (based on http://wiki.openwrt.org/OpenWrtDocs/Customizing/Hardware/JTAG_Cable) that works fine with hairydairymaid (HDM) 4.8 with the /wiggler option (however only after making TDO available on both pins 11 and 13 of the DB25, cause' HDM is checking SELECT and not BU...


how to program a flash with the wiggler? (for free)

Started by Erol in comp.arch.embedded20 years ago 21 replies

I bought a wiggler probe for ARM7 and was very disappointed when I didn't receive a Flash Programmer Utility with it! Apparently they sell the...

I bought a wiggler probe for ARM7 and was very disappointed when I didn't receive a Flash Programmer Utility with it! Apparently they sell the Flash Programmer SW for 500 extra bucks! I am not eager to pay any additional dollars to this company, so I would like to know if the wiggler can be used with any other Flash Programmer software. Thanks, Erol P.S. I heard that the OCD Comman...


ARM std dev. toolkit v.2.51 with wiggler?

Started by Jack in comp.arch.embedded21 years ago 3 replies

Hi. The manual of arm SDT 2.51 mentions their multiICE only, but no wiggler. Anyone knows if I can use wiggler with ARM std dev. toolkit...

Hi. The manual of arm SDT 2.51 mentions their multiICE only, but no wiggler. Anyone knows if I can use wiggler with ARM std dev. toolkit v.2.51 ?


JTAG wiggler

Started by lear...@gmail.com in comp.arch.embedded18 years ago 11 replies

I am new to embedded programming and I am working on MPC8xx. What exactly is JTAG wiggler and how will it help me with the development? I tried...

I am new to embedded programming and I am working on MPC8xx. What exactly is JTAG wiggler and how will it help me with the development? I tried to find info on it and most groups say that it speeds up development process. Thanks in advance....


Read MPC855 Memory with Wiggler?

Started by RamblinPeck in comp.arch.embedded16 years ago

Hello everyone, I'm very new to embedded systems, and debugging them. Im teaching myself and learning a lot on the way. I'm having some...

Hello everyone, I'm very new to embedded systems, and debugging them. Im teaching myself and learning a lot on the way. I'm having some trouble with the wiggler, and macraigor has been less than helpful (dont blame them, I bought mine secondhand so they dont have much incentive). I can use the OCD Commander software just fine, but I'd like a way to download larger portions of memory ...


atmel arm

Started by milo_00 in comp.arch.embedded17 years ago 9 replies

i am trying to get to program atmel's arm side of things but i think i may have to save for the mk2 of jtagice so that i can do this but in...

i am trying to get to program atmel's arm side of things but i think i may have to save for the mk2 of jtagice so that i can do this but in the meantime i will use a wiggler clone device for doing this till i can afford the massive price of the programmer if you could recommend me a programmer debugger it would be muchly appreciated ... thanks milo_00 PS a Design for the wiggler clone co...


Atmel Atmega128L and Macgraigor Wiggler

Started by Pat Barlow in comp.arch.embedded20 years ago 8 replies

We are regularly programming an Atmeg128l board with the Atmel JTAGICE + AVRStudio with no problems, but in production it would be useful to use...

We are regularly programming an Atmeg128l board with the Atmel JTAGICE + AVRStudio with no problems, but in production it would be useful to use a MacGraigor Wiggler to program the Atmel, as we already have one in our test/programming jig. MacGraigor don't support the Atmel AVR devices, but I reckon there should be a software solution to this, does anyone know what it might look like? TIA. ...


TMS470R1A256 - Wiggler ARM-JTAG question

Started by codic in comp.arch.embedded19 years ago 2 replies

Hi, I'm using an ARM-JTAG dongle interface (which uses parallel port, and is Macraigor Wiggler compatible) to program a TMS470R1A256 on...

Hi, I'm using an ARM-JTAG dongle interface (which uses parallel port, and is Macraigor Wiggler compatible) to program a TMS470R1A256 on a TMS470-P256 board (made by Olimex). I have been able to load the application to RAM and to flash, but when executed from flash, the applicaton runs 16 times slowlier. Using the debugging feature of the ARM-JTAG, I have stopped the execution in both cases...


MPC8xx wiggler circuit diagram..

Started by rob in comp.arch.embedded19 years ago 3 replies

Where can I find the MPC8xx BDM wiggler circuit diagram? Thanks,

Where can I find the MPC8xx BDM wiggler circuit diagram? Thanks,


Use Macraigor ARM wiggler on PowerPC?

Started by Lewin A.R.W. Edwards in comp.arch.embedded19 years ago 4 replies

I'm getting to work on a PowerPC-based NAS appliance, based around an MPC8241 micro. There appears to be a standard 16-pin COP port on...

I'm getting to work on a PowerPC-based NAS appliance, based around an MPC8241 micro. There appears to be a standard 16-pin COP port on the board. Apparently nobody else in the entire universe has ever used this port, though. I have a (genuine Macraigor! Accept no substitutes!) JTAG wiggler that was originally bought for ARM development, and has the standard 20-pin ARM header. However, the ...


Wiggler with WinXP

Started by Thomas Motz in comp.arch.embedded20 years ago 10 replies

Hi all, I tried to use the Wiggler compatible JTAG Adapter from Olimex with OCD Commander. Under Win2K it works fine. On my new PC under...

Hi all, I tried to use the Wiggler compatible JTAG Adapter from Olimex with OCD Commander. Under Win2K it works fine. On my new PC under WinXP it fails. Commander gives the message "Adapter not connected" A parallel printer works fine on this LPT Port. Macraigor wrote that the Commander works with Win XP. Has anybody used this combination? Do I need special drivers for LPT Port unde...


Jtag interface supporting RDI

Started by Old Wolf in comp.arch.embedded20 years ago 1 reply

Hi all Is there any software available that will let me use ARM AXD debugger with a plain old Wiggler or similar home-made device? (I'm...

Hi all Is there any software available that will let me use ARM AXD debugger with a plain old Wiggler or similar home-made device? (I'm trying to debug on a device that already has a Jtag port, but not ICE). If not, are there any IP issues etc. that would prevent me from writing my own?


Can I use JTAG to programme FLASH Memory?

Started by CC in comp.arch.embedded17 years ago 5 replies

Hi,I'am planning to use AT91SAM9260 but i don't have a SAM-ICE which is so expensive.So can i just use Wiggler JTAG to programme...

Hi,I'am planning to use AT91SAM9260 but i don't have a SAM-ICE which is so expensive.So can i just use Wiggler JTAG to programme my AM29LV160D(AMD Boot Sector Flash,16Mbit)? If i can,how to implement it?


MPC8241 and Wiggler - any hints?

Started by Lewin A.R.W. Edwards in comp.arch.embedded20 years ago 3 replies

Ah, Saturday. Time to sit down and play with this PowerPC board. I installed a series resistor so the COP port on the board is supplying IO...

Ah, Saturday. Time to sit down and play with this PowerPC board. I installed a series resistor so the COP port on the board is supplying IO power (3.3V) and fired everything up. But Commander gives me the dreaded 03; cable disconnected error. If I query registers, I get either all 0s or all 1s (randomly, it seems). The only thing I can do is reset - that DOES work, so I know the interface ...


LPC2106 JTAG Programming Confusion!!

Started by amerdsp in comp.arch.embedded17 years ago 1 reply

Greetings, I am reading mixed information about the ability to program the 2106 using a parallel port wiggler. Some say that it is only...

Greetings, I am reading mixed information about the ability to program the 2106 using a parallel port wiggler. Some say that it is only possible to program the device via RS232 but others say that it is possible to do the JTAG programming. What am I missing? What do I need to have to be able to use JTAG for programming the chip if possible? Thank you, -- A


GDB or Insight across ethernet

Started by ChrisQuayle in comp.arch.embedded18 years ago 21 replies

Am trying to get a environment going to allow development on > 1 networked hosts, perhaps unix, win2k, or even linux, with networked target...

Am trying to get a environment going to allow development on > 1 networked hosts, perhaps unix, win2k, or even linux, with networked target hardware. Am late to the arm party, but am considering several arm variants, as well as coldfire. The arm targets all seem to be jtag, with wiggler interface to parallel port and to get this networked, plan to use a cheap s/hand hp printserver (Paral


Quick help with PIC18F4510 - not debuggable in Large memory model?

Started by larwe in comp.arch.embedded14 years ago 1 reply

Anyone have experience working with this part and Hi-Tech C (lite)? I've got a weird problem and I'm not sure my workaround is correct. I have...

Anyone have experience working with this part and Hi-Tech C (lite)? I've got a weird problem and I'm not sure my workaround is correct. I have connected only a debug header per the ICD2 LE instructions, with a reset pullup and no other hardware. Put a scope probe on RA6 and another on RA0, and trivial pin-wiggler. If I try to build it in debug mode and debug it, everything appears like it wor...


JTAG emulators

Started by Andy Chan in comp.arch.embedded20 years ago 2 replies

Hi, I am trying to find a JTAG emulator for a new project which uses a ARM7 processor. I am considering several vendors, such as...

Hi, I am trying to find a JTAG emulator for a new project which uses a ARM7 processor. I am considering several vendors, such as Lauterbach (Trace32 ICD), Macraigor (Wiggler, Raven, usbDemon, mpDemon), Emutec (DebugJet), Hitex (Tantino), Embest, Nohau, EPI, SigNum, ...etc. The emulator has to support multi-core. If anyone has use the JTAG emulator from these vendors, can you pleas...


Programming LPC with Console DOS Commands.

Started by Mahkam in comp.arch.embedded14 years ago 1 reply

HI EmbeddedRelated members I have a subject about LPC2212 ARM7 micro-controller that i want that one could help me on it. I have a board...

HI EmbeddedRelated members I have a subject about LPC2212 ARM7 micro-controller that i want that one could help me on it. I have a board containing an LPC2212+S29AL016D-M02 Spansion Flash. I'm programming it by a LPT port wiggler interface (bought from H-Jtag), I used H-Flasher utility existant in H-Jtag 1.0 freeware obtained from H-JTAG. OS is Windows XP. After well writing the script .hf...