EmbeddedRelated.com

MPLAB 6.6 and CCS C, good?

Started by Dennis Clark in comp.arch.embedded20 years ago 2 replies

I'm adding some new 18F stuff to my list of things I'm doing and want to get MPLAB 6.6 installed. I currently use CCS C 3.18 which says...

I'm adding some new 18F stuff to my list of things I'm doing and want to get MPLAB 6.6 installed. I currently use CCS C 3.18 which says that it is good to go on MPLAB 6.2 and up. It is unclear to me whether my MPLAB 6.6 update will overwrite or coexist with my MPLAB 5.75 installation and what I'll have to do to get CCS working with the whole lot. Has anyone got any experience with this...


problem w using Compiler for MPLAB

Started by mahe in comp.arch.embedded19 years ago 1 reply

Hi I have installed successfully MPLAB 7.11 and Hitech C Compiler v8.53 but the problem is that i able to build through MPLAB but could...

Hi I have installed successfully MPLAB 7.11 and Hitech C Compiler v8.53 but the problem is that i able to build through MPLAB but could not able to run or simulate code in MPLAB simulator can any one please give me suggestion what to do .I am struck up here and struggling a lot. from MK


MPLAB C30 problem

Started by Syd Rumpo in comp.arch.embedded9 years ago 4 replies

Hi I want to use a dsPIC33EP512GM304 but MPLAB tells me... pic30-coff-cc1.exe: error: Invalid -mcpu option. CPU 33EP512GM304 not...

Hi I want to use a dsPIC33EP512GM304 but MPLAB tells me... pic30-coff-cc1.exe: error: Invalid -mcpu option. CPU 33EP512GM304 not recognized. MPLAB allows me to select the device type, but there doesn't seem to be a .h file for it. I really don't want to change to MPLABX as I already have a licence, plus what I have ain't broke and don't need fixing. Anything I can do? Chee...


Program PIC16F84(/A) with microchip MPLAB ICD 2

Started by Anonymous in comp.arch.embedded20 years ago 6 replies

I'd like to program my PIC16F84 with microchip MPLAB ICD 2 (I use this software : microchip MPLAB IDE version 6.30.0.0). It seems that the MPLAB...

I'd like to program my PIC16F84 with microchip MPLAB ICD 2 (I use this software : microchip MPLAB IDE version 6.30.0.0). It seems that the MPLAB ICD 2 doesn't support this PIC, and I can't program it. What's wrong? Are there other possibilities to progam this type of PIC with the same programmer? Thank-you very much for reply. Roby.


Mplab Microchip problem

Started by Dan in comp.arch.embedded20 years ago 2 replies

I use Mplab 6.3 for programming. I also installed piclite.exe for have a C compiler for my code (generic is asm compiler). I use 16f876a....

I use Mplab 6.3 for programming. I also installed piclite.exe for have a C compiler for my code (generic is asm compiler). I use 16f876a. When i compile my design MpLab give me an error: -- Executing: "C:\PICCLITE\BIN\PICL.EXE" -C -E"lab1p1.cce" "lab1p1.c" -O"lab1p1.obj" -I"C:\PICCLITE\lib" -Q -MPLAB -16F876A Error[000] : Unknown flag -16F876A Halting build on first failure as re...


MPLAB v7 Debugger

Started by mcki0127 in comp.arch.embedded18 years ago 6 replies

A few years ago, I successfully created a project in MPLAB v5 to program a 16F77 for an application, which has been working since. I've...

A few years ago, I successfully created a project in MPLAB v5 to program a 16F77 for an application, which has been working since. I've recently installed MPLAB v7 and would like to edit the project. I've used the project wizard to add the two required files: the .asm source file and .inc header file. The problem is that when I try to debug the program by stepping through etc. it skip...


mplab 6.42

Started by karel in comp.arch.embedded19 years ago 2 replies

where can MPLAB 6.42 be downloaded? absolutely need this older version TIA, KA

where can MPLAB 6.42 be downloaded? absolutely need this older version TIA, KA


MPLAB 7.0 on website

Started by Gary Kato in comp.arch.embedded20 years ago 10 replies

Just noticed that Microchip Technologies now has MPLAB 7.0 available for downloading. Don't know how it differs. I'll have to wait until later...

Just noticed that Microchip Technologies now has MPLAB 7.0 available for downloading. Don't know how it differs. I'll have to wait until later tonight to download it.


MPLAB ICD 2 usage

Started by kiran_hk in comp.arch.embedded16 years ago 9 replies

I have downloaded MPLAB IDE v8.30 and installed it. I wanted to communicate PIC18F452 and PC I am using a sensor for my project which gives...

I have downloaded MPLAB IDE v8.30 and installed it. I wanted to communicate PIC18F452 and PC I am using a sensor for my project which gives analog data.I am digitizing using 10 Bit ADC in the PIC. I want save the data from the ADC to a file in the computer. Now how should I proceed in the programming the PIC. Can you help me in this regard? I am trying to use ICD 2 module in the MPLAB softwa...


PIC 16f877 and MPLAB compatibilty

Started by Bhanu Samarth in comp.arch.embedded20 years ago 3 replies

Hi all, I am working on a data acquistion part from a sensor to PC. I am using a PIC 16f877 and I have MPLAB IDE v5.61 and the ICD...

Hi all, I am working on a data acquistion part from a sensor to PC. I am using a PIC 16f877 and I have MPLAB IDE v5.61 and the ICD flash module. I wanted to know if there is anyway I could use the latest version which is MPLAB 6.6 with the ICD flash module. or would i need the ICD2(hockey puck thing) if i need to use the v6.6. Please let me know your experiences. thanks, Bhanu


MPLAB IDE

Started by aamer in comp.arch.embedded16 years ago 7 replies

Hi all, I just started writing small applications in MPLAB IDE for PIC16F micro controllers. I tried to save the .C file (one of source files)...

Hi all, I just started writing small applications in MPLAB IDE for PIC16F micro controllers. I tried to save the .C file (one of source files) into source files section of the project I created. Surprisingly, its getting saved in other files section. I tried with different versions of simulator which gave same result. Any suggestions from experts of MPLAB IDE??? Thanks and regards Aamer ...


mplab & special function registers

Started by Rob Horton in comp.arch.embedded18 years ago 1 reply

When I view the special function registers using mplab, every register appears to be set to zero. I just can't believe this since when I...

When I view the special function registers using mplab, every register appears to be set to zero. I just can't believe this since when I program two different applications, the PIC (16F87) behaves as if the SFR's have different values, yet when I use mplab to view the SFR's everything is still zero. What have I overlooked? All I want to do is connect the lead from my ICD2 to the PIC ...


ICD2 with MPLab 6.3 and PIC C from CCSC

Started by Jason James in comp.arch.embedded21 years ago 1 reply

Hi All, I am developing using CCSC C and MPLab 6.3. I program my devices with the PIC Start Plus and all seems to work fine, albeit a little...

Hi All, I am developing using CCSC C and MPLab 6.3. I program my devices with the PIC Start Plus and all seems to work fine, albeit a little slowly with some of the larger PICs. If I can improve my development cycle time with a different programmer/solution then I would definately look at one. Will to ICD2 work with with both MPLab 6.3 and CCSC C in the same way that the PIC Start...


Setup HI-TECH PICC8.02 compiler and MPLab 6.4

Started by G_swidwin in comp.arch.embedded21 years ago 16 replies

Hi all, I have a problem finding any information on how to set HI-TECH PICC8.02 compiler and MPLab 6.4 (under WinXP). Especially I need...

Hi all, I have a problem finding any information on how to set HI-TECH PICC8.02 compiler and MPLab 6.4 (under WinXP). Especially I need directions how to set project under MPLAB using a Project\Build Options. When I try to compile project which has only one file xxx.c I don't have any problem. But when my project includes more source files (xxxx.c, yyyy.c ) and yyy.h I get an error: Er...


MPLAB 5.70.40 is integrated with HI-TECH PICC compiler v8.02 PL1

Started by Bruce Sam in comp.arch.embedded20 years ago 2 replies

I have integrated MPLAB 5.70.40 with HI-TECH PICC compiler v8.02 PL1 but failed.When I only compiled just a simple .c file,it appear this...

I have integrated MPLAB 5.70.40 with HI-TECH PICC compiler v8.02 PL1 but failed.When I only compiled just a simple .c file,it appear this message:MPLAB is unable to find output file "DELAY.HEX". This may be due to a compile, assemble, or link process failure.Here is all I have done: 1.Click on the Option menu in the mehu bar, and select Environment setup,in this new dialog box,I have setted...


MPLab default chip

Started by Mike Diack in comp.arch.embedded20 years ago 3 replies

Any way of changing the default (18Fsomethingorother) device in MPLab? Cheers M

Any way of changing the default (18Fsomethingorother) device in MPLab? Cheers M


Using MPLab PICc-18 to test PIC18F4580

Started by bkrpic in comp.arch.embedded17 years ago 3 replies

hi all i am using mplab ide7.51 and PICC-18 compiler to compile a program for PIC18F4580. if i compile i am facing the following...

hi all i am using mplab ide7.51 and PICC-18 compiler to compile a program for PIC18F4580. if i compile i am facing the following probem. Executing: "C:\HTSOFT\PIC18\BIN\PICC18.EXE" -C -E"sp3.cce" "sp3.c" -O"sp3.obj" -Zg9 -O -Q -MPLAB -18F4580 Error[000] : Unknown flag -18F4580 Halting build on first failure as requested. BUILD FAILED: Wed Mar 19 14:56:37 2008 so i hop...


Microchip MPLAB IDE Selecting Device

Started by GaryI in comp.arch.embedded17 years ago 1 reply

Hi, Is there a simpler way to choose a device from the MPLAB IDE instead of having to go to the Configure> Select Device menu option? Can...

Hi, Is there a simpler way to choose a device from the MPLAB IDE instead of having to go to the Configure> Select Device menu option? Can this device be selected by a keyword/define in code? Help greatly appreciated, Thanks, GI


Which PIC18 C Compiler?

Started by Talal Itani in comp.arch.embedded17 years ago 87 replies

Hello, I currently have an ICD2 from Microchip. I use it to develop PIC16 code using the MPLAB debugger and assembler. I need to move to the...

Hello, I currently have an ICD2 from Microchip. I use it to develop PIC16 code using the MPLAB debugger and assembler. I need to move to the PIC18 parts and C language, but I am struggling figure out the development tools to get. Do you have any experience with the CCS compiler running with MPLAB and ICD2? ($175 solution) Thanks, Talal


MPLAB and my WPR3 programmer

Started by Sonnich Jensen in comp.arch.embedded13 years ago 18 replies

Hi all I got a programmer named WPR3. It offers to program PIC16 and PIC12, as well as some cards and EEPROMs. I only need the PIC...

Hi all I got a programmer named WPR3. It offers to program PIC16 and PIC12, as well as some cards and EEPROMs. I only need the PIC part. It is an older type, which is directly controlled by the parallel port, a type which should have been common at the time. Though I have not found much on the net. My basic problem is that my MPLAB will not use/accept it, and I dont know where to get...