EmbeddedRelated.com

http://www.atmel.com/Images/ PDFs

Started by Ivan Shmakov in comp.arch.embedded11 years ago 1 reply

Curiously, Atmel seem to have changed both their URI minting scheme and the PDF formatting sometime between 19'th and 29'th. (As well as...

Curiously, Atmel seem to have changed both their URI minting scheme and the PDF formatting sometime between 19'th and 29'th. (As well as their logo.) Thus, the document formely known as, say: http://www.atmel.com/Images/doc8159.pdf is now instead: http://www.atmel.com/Images/Atmel-8159-8-bit-AVR-microcontroller-ATmega8A_datasheet.pdf (which seems almost hopeless for me to re...


Atmel Atmega128L and Macgraigor Wiggler

Started by Pat Barlow in comp.arch.embedded19 years ago 8 replies

We are regularly programming an Atmeg128l board with the Atmel JTAGICE + AVRStudio with no problems, but in production it would be useful to use...

We are regularly programming an Atmeg128l board with the Atmel JTAGICE + AVRStudio with no problems, but in production it would be useful to use a MacGraigor Wiggler to program the Atmel, as we already have one in our test/programming jig. MacGraigor don't support the Atmel AVR devices, but I reckon there should be a software solution to this, does anyone know what it might look like? TIA. ...


[ANN] Atmel invest millions of $ to please Jim Granville

Started by Ulf Samuelsson in comp.arch.embedded19 years ago 15 replies

Read All About it, Read all About it. Atmel releases single clock cycle 8051...

Read All About it, Read all About it. Atmel releases single clock cycle 8051 chips... http://www.atmel.com/dyn/corporate/view_detail.asp?FileName=AT89LP_3_8.html -- Best Regards, Ulf Samuelsson ulf@a-t-m-e-l.com This message is intended to be my own personal view and it may or may not be shared by my employer Atmel Nordic AB


Atmel Zigbee?

Started by Anonymous in comp.arch.embedded17 years ago 2 replies

Hi, I'm a student working on an embedded systems undergraduate design project. In our project, we want to use an Atmel chip with some...

Hi, I'm a student working on an embedded systems undergraduate design project. In our project, we want to use an Atmel chip with some other Zigbee module that will allow us to transfer information using Zigbee wireless communication. We have found several choices, such as Maxstream's XBee Zigbee module, but we would prefer to use one that is from Atmel or is compatible with Atmel. We...


What happened to RFID readers IC U2270B from Atmel?

Started by pozz in comp.arch.embedded10 years ago 4 replies

I have an old RFID reader that is based on U2270B chip from Atmel (previously from TEMIC). It seems any kind of info about this IC are...

I have an old RFID reader that is based on U2270B chip from Atmel (previously from TEMIC). It seems any kind of info about this IC are disappeared on Atmel web site. There are only documents and info about RFID transponders, but not the readers. Is Atmel producing this IC yet? Is there a new modern device to use for RFID readers?


Atmel

Started by Peter Keller in comp.arch.embedded15 years ago 19 replies

Hello, I've done some PIC development before, with the PIC16F690, PIC18F4321, etc. and I'm thinking about trying out the Atmel processors...

Hello, I've done some PIC development before, with the PIC16F690, PIC18F4321, etc. and I'm thinking about trying out the Atmel processors since I've heard they have a flat memory space (no banks), a software stack, and other things I am interested in. What would be a good entry level atmel microprocessor to experiment with (maybe having features like USART, SPI, USB, external data/program ...


Atmel AT89C51SND1C and FLIP software problem

Started by Gary Morton in comp.arch.embedded20 years ago 1 reply

I have a PCB with the AT89C51SND1C Atmel MP3 processor. I have loaded the Atmel FLIP software (V2.2.4). I found that the device does not...

I have a PCB with the AT89C51SND1C Atmel MP3 processor. I have loaded the Atmel FLIP software (V2.2.4). I found that the device does not repond to the RS232 communications from the FLIP software. An email to the Atmel support was quickly answered and I was told to use USB instead. I have installed the USB drivers for FLIP, but now when I try to open the USB port I get the error messag...


Atmel Data Flash

Started by Anonymous in comp.arch.embedded19 years ago 3 replies

Hello, Does anybody have info about the average write cycles of Atmel data flash sectors before wear-out occurs? Maybe I overlooked it, but...

Hello, Does anybody have info about the average write cycles of Atmel data flash sectors before wear-out occurs? Maybe I overlooked it, but I could not find anything in the data sheets. A mail to Atmel did not lead to any response. Thanks for any reply. Thomas


arm7 atmel vs others

Started by Rick in comp.arch.embedded20 years ago 59 replies

In my new arm7 design I was biased toward the atmel AT91 seriesbecause I like the AVR chips so much, but after some research and pointers by nice...

In my new arm7 design I was biased toward the atmel AT91 seriesbecause I like the AVR chips so much, but after some research and pointers by nice foks such as rickman and Leon, I decided to look toward other manufacturer's offerings. One thing I discovered is that the flash in the atmel chips (which have it) is slow! Thus using a ball grid type package such as the AT91FR40162 with 2Meg of fla...


Atmel GPS ATR0625

Started by eeh in comp.arch.embedded17 years ago 2 replies

Hi, Could anyone tell me how to find development tools (softwares and hardwares) for the Atmel GPS chip ATR0625? I ask this as I find...

Hi, Could anyone tell me how to find development tools (softwares and hardwares) for the Atmel GPS chip ATR0625? I ask this as I find no information in Atmel offical website. Thanks!


Where to buy Atmel evaluation board

Started by hikari in comp.arch.embedded19 years ago 8 replies

I am a student who wants to learn ARM based embedded system. I have found that Atmel EB40, EB40A, EB55 seem to be good evaluation boards. I want...

I am a student who wants to learn ARM based embedded system. I have found that Atmel EB40, EB40A, EB55 seem to be good evaluation boards. I want to buy one, but from where? Atmel's website caters only to the business world. Where can I buy just one board? Thanks very much. -Hikari


[ANN] Atmel DIOPSiS ARM+DSP Design Contest 2005 for Universities

Started by Ulf Samuelsson in comp.arch.embedded19 years ago 4 replies

Atmel has launched the DIOPSiS DSP Design Contest 2005 http://www.atmelroma.it/contest/index.php First price is 6000Euro. Atmel will...

Atmel has launched the DIOPSiS DSP Design Contest 2005 http://www.atmelroma.it/contest/index.php First price is 6000Euro. Atmel will be happy to have Universities andd Colleges participating in the contest. By combining a floating-point VLIW digital signal processor core with an ARM7 microcontroller on the same chip, Atmel Corp. adds a new wrinkle in an already intensely com...


What is happening to Atmel EEPROMs?

Started by Peter in comp.arch.embedded14 years ago 44 replies

They have doubled their prices and the lead times are 18 weeks. Yet, others are making them OK. Are Atmel trying to get out of the...

They have doubled their prices and the lead times are 18 weeks. Yet, others are making them OK. Are Atmel trying to get out of the business? x----------x


Atmel errata info missing from data sheets!

Started by rickman in comp.arch.embedded18 years ago 1 reply

A posting to the Atmel FAQ dated 12/05/05 says that "The errata (if any) will be included IN all newly revised datasheets." I know there are...

A posting to the Atmel FAQ dated 12/05/05 says that "The errata (if any) will be included IN all newly revised datasheets." I know there are some significant errata on the AT91SAM7S family as I have been discussing it with the vendor. But they no longer make an errata sheet available and the data sheet updated in Feburary this year has no errata information in it. So what's up Atmel? Tr...


Atmel FPSLIC users out there?

Started by Anonymous in comp.arch.embedded17 years ago 2 replies

Hi, In the past I did some work with the Atmel FPSLIC. Eventually the project was changed and the FPSLIC was dropped. I have lots of...

Hi, In the past I did some work with the Atmel FPSLIC. Eventually the project was changed and the FPSLIC was dropped. I have lots of working code still around from that project. It takes advantage of the tight FPGA + MCU symbiosis, so it's difficult to reuse on other platforms. I wonder if there are any Atmel FPSLIC users out there? I could polish up some of the code and publish it...


!!HELP:ATMEL AT89C51ED2'S FLASH FAIL

Started by Anonymous in comp.arch.embedded17 years ago

In our application, when we update our application stored in flash of AT89C51ED2 by the IAP function, sometimes we find that one bit...

In our application, when we update our application stored in flash of AT89C51ED2 by the IAP function, sometimes we find that one bit every 128bytes can't be write right.for example, one bit every 128bytes was '0' for ever and can't be changed to '1'.why? About two years ago, ATMEL's Microcontroller T89C51RD2 was used in our product. After ATMEL didn't produce it and advise us replace it by ...


Atmel atiny11 internal clock range

Started by Hul Tytus in comp.arch.embedded17 years ago 7 replies

comp.arch.embedded Atmel atiny11 internal clock range Has anyone seen a min/max spec. for Atmel's atiny11? The documentation here is dated...

comp.arch.embedded Atmel atiny11 internal clock range Has anyone seen a min/max spec. for Atmel's atiny11? The documentation here is dated 07/06, presumably june, 2006 and states only 1 megcps; no range, no thermal coeficient. Hul


Advice neede: Atmel or Philips ARM

Started by Meindert Sprang in comp.arch.embedded18 years ago 39 replies

Hi Gurus, I am switching from AVR to ARM. Currently, I use an ATmega162 which is running out of code space (16kB) and performance. But I find...

Hi Gurus, I am switching from AVR to ARM. Currently, I use an ATmega162 which is running out of code space (16kB) and performance. But I find it difficult to choose between Atmel's ARM (looking at the SAM7S series) and thePhilips LPC2104/5/6 series. I don't need many peripherals (yet). My current design uses an FTDI chip for USB, I could save that by using Atmel (Philips has no USB), but o...


Atmel ARM AT91SAM7S256 USB Question

Started by Anonymous in comp.arch.embedded18 years ago 6 replies

Hi, On our project, we are considering an ARM with a USB interface (Atmel AT91SAM7S256). From looking at the datasheet, it appears that we...

Hi, On our project, we are considering an ARM with a USB interface (Atmel AT91SAM7S256). From looking at the datasheet, it appears that we need an 18.432 MHz crystal for the USB to operate at full speed. Is this correct? The datasheet seems to be a bit ambiguous in this regard. I looked at the schematic for Atmel's AT91SAM7S-EK evaluation board and noticed that they are using an 18.432 ...


AVR32 Development Tools?

Started by Bob in comp.arch.embedded17 years ago 5 replies

Does anyone know of any third party development tools for the Atmel AVR32 family besides IAR? We just got in some EVK1100 development boards...

Does anyone know of any third party development tools for the Atmel AVR32 family besides IAR? We just got in some EVK1100 development boards bundled with Atmel's AVR32 Studio and a crippled version of IAR Embedded Workbench. The Atmel suite seems pretty hideous and non- intuitive, and the IAR single seat license is 4000 bucks! Is there anything else out there? Thanks, Bob