experience with rabbit uC ???

Started by Adib Taraben in comp.arch.embedded11 years ago 5 replies

Does someone has experience with rabbit uC ? I am looking for an uC with many communication ports (serials/CAN and ethernet). The rabbit...

Does someone has experience with rabbit uC ? I am looking for an uC with many communication ports (serials/CAN and ethernet). The rabbit looks like a good choice. How does it compares to the ARM7TDMI? Thx, Adib. ---


Rabbit micros - any good ?

Started by Colin MacDougall in comp.arch.embedded14 years ago 7 replies

Hi, I was thinking of buying a Rabbit Semiconductor evaluation kit for either the Rabbit 2000 or 3000 range. Has anyone here had any...

Hi, I was thinking of buying a Rabbit Semiconductor evaluation kit for either the Rabbit 2000 or 3000 range. Has anyone here had any experience using these micros, and any comments good, bad or indifferent. The large amount of serial ports looks quite good and the instruction set doesn't look too far removed from the Z80. This is not an attempt to canvas the usual 'micro x is better than ...


Rabbit 4k and ethernet

Started by Anonymous in comp.arch.embedded10 years ago 7 replies

Hi experts, We have to design a special device....to implement a special protocol on top of ethernet. Rabbit 4k devices look like a good...

Hi experts, We have to design a special device....to implement a special protocol on top of ethernet. Rabbit 4k devices look like a good choice, but it comes with TCP/IP stack built in. How easy it is in Rabbit 4K to get rid of the the TCP/IP stack from OS and take charge of packets arriving over ethernet. I am aware of NE2000 compatibility. Please let me know whether it will be helpf...


Rx Aurel module and Rabbit RCM3700

Started by cirutech in comp.arch.embedded13 years ago 1 reply

Hi everyone! I have the following question: I need to interface an rx module RF from Aurel (RX-4M30RR01SF) with a Microcontroller from...

Hi everyone! I have the following question: I need to interface an rx module RF from Aurel (RX-4M30RR01SF) with a Microcontroller from Rabbit Semiconductor, the RCM3700. More specifically, the AUrel moduel receives a signal from a 4-channel remote, still from aurel (TX3750-AC SAW433), and according to this signal the Rabbit will activate/deactivate the related controls. My REAL problem is u...


Rabbit 3400 CPU module

Started by Anonymous in comp.arch.embedded12 years ago 17 replies

Do you know if it is possible in Rabbit 3400 CPU module to access all its serial com ports simultaneously? Does its C development environment...

Do you know if it is possible in Rabbit 3400 CPU module to access all its serial com ports simultaneously? Does its C development environment support multiple threads?


embedded Linux for Rabbit 3000 ?

Started by Anonymous in comp.arch.embedded14 years ago 3 replies

Hello, everyone , is there a port of linux for Rabbit 3000 microprocessor ? Thanks in advance.

Hello, everyone , is there a port of linux for Rabbit 3000 microprocessor ? Thanks in advance.


Microprocessor recommendations?

Started by Rocky in comp.arch.embedded11 years ago 19 replies

Hi All, I want to move to something bigger than a Z80/8032/PIC which I use at the moment. I would like about 50 MIPS, 1MByte Flash, 256KByte...

Hi All, I want to move to something bigger than a Z80/8032/PIC which I use at the moment. I would like about 50 MIPS, 1MByte Flash, 256KByte RAM - possibly all external, integrated ethernet, 2 serial ports, enought DSP capability to do 2 or so channels VOIP, the ability to self program (bootloader) for remote update. I have looked at ST, Freescale and Rabbit. The rabbit seems to be alm...


web pages in rabbit core 3000

Started by tamilmaran s in comp.arch.embedded13 years ago 2 replies

hi, I want to load a web page on rabbit core 3000 and connect that module on internet.How can i access that page from the net. i am expecting...

hi, I want to load a web page on rabbit core 3000 and connect that module on internet.How can i access that page from the net. i am expecting your valuable idea regarding this. Advance thanks for your response with regards marans


New Rabbit 3000 Open Source Kit

Started by Zan in comp.arch.embedded13 years ago 5 replies

Hi All, Cool new PC controller kit based on the Rabbit 3000. Both the firmware and Windows server software is open source. Here you go:...

Hi All, Cool new PC controller kit based on the Rabbit 3000. Both the firmware and Windows server software is open source. Here you go: www.zanware.com --Zan


Rabbit 3000 + FSER.LIB

Started by chris333 in comp.arch.embedded12 years ago 1 reply

hi has anyone used the fser.lib with a rabbit 3000 uC? if yes could somebody post some code samples how to use it with spi? thanks chris

hi has anyone used the fser.lib with a rabbit 3000 uC? if yes could somebody post some code samples how to use it with spi? thanks chris


Looking for a embedded system with A/D digital I/O and Ethernet

Started by Anonymous in comp.arch.embedded12 years ago 7 replies

I would like a turnkey board with development in C, 4+ A/D inputs with at least 8 digital inputs and 8 outputs. So far I have found the Rabbit...

I would like a turnkey board with development in C, 4+ A/D inputs with at least 8 digital inputs and 8 outputs. So far I have found the Rabbit 3400 for be the closest fit. Are there any others out there? I find the Rabbit a little hokey with is extended memory architecture. It reminds me of EMM on a XT style PC. I have experience with a embedded PCs on 386/486 as well as some Windows progra...


Followup: My Ethernet EVB request

Started by larwe in comp.arch.embedded11 years ago 1 reply

A few weeks ago I posted a request asking for cheap (vs Olimex's MSP430 boards) EVBs with Ethernet to build a proof of concept and then use...

A few weeks ago I posted a request asking for cheap (vs Olimex's MSP430 boards) EVBs with Ethernet to build a proof of concept and then use the design as the basis of a low-volume production run. I can't seem to find that thread, but here's a summary of what I decided: Someone in that thread suggested Rabbit. It is a long time since I looked at Rabbit, but I took a look, talked to their sal...


Please Help!! Single Board Computer and USB

Started by Junior Sanders in comp.arch.embedded13 years ago 8 replies

I know this is probably an easy question for some of you, but here's what I am trying to do: Use a single board computer (ie Zworld's Rabbit...

I know this is probably an easy question for some of you, but here's what I am trying to do: Use a single board computer (ie Zworld's Rabbit Processor) to read a USB device such as Memory Stick or Digital Camera. The Rabbit board has serial ports, but not USB port. Have any of you done anything like this?? Thanks in Advance, JS


PRE-Assembled Rabbit Adapter Boards - 1.27mm --> 0.10 ???

Started by B1ackwater in comp.arch.embedded9 years ago 3 replies

Aaaaugh !!! Teenie-tiny pin schemes may be ok for robots, but not for human assemblers. Rabbits 2mm scheme was bad enough, but now I'm...

Aaaaugh !!! Teenie-tiny pin schemes may be ok for robots, but not for human assemblers. Rabbits 2mm scheme was bad enough, but now I'm working with the RCM-3400 which shrank everything down to a solder-bridge-guarenteed 1.27mm layout. Rabbit does sell what it calls an adaptor board ... but you get a board and some SM sockets YOU have to solder onto the thing. This doesn't fix the ...


Add Cloning Capabilities to RCM3319

Started by arkaneedthese in comp.arch.embedded2 years ago

Hello All, I am new to the forums, previously have been lurking throughout the forums. I have a rabbit core 3319 micro controller that has...

Hello All, I am new to the forums, previously have been lurking throughout the forums. I have a rabbit core 3319 micro controller that has source code that I no longer have access to. I was wondering if there was a way I could clone this device using rabbit core cloning tool. After some reading I found that the enabling of cloning is dependent parameters set on the master 3319 chip. My mai...


Quickie ZigBee Application Kit from Rabbit!

Started by Bill Giovino in comp.arch.embedded11 years ago 36 replies

Admittedly, I'm a fan of ZigBee because it solves a lot of problems. Rabbit has just introduced a solid ZigBee...

Admittedly, I'm a fan of ZigBee because it solves a lot of problems. Rabbit has just introduced a solid ZigBee kit: http://microcontroller.com/news/zigbee_rabbit.asp This is a great starter kit, and by this time next year ZigBee will be a needed skill to list on your resume. Regards, Bill Giovino Executive Editor http://Microcontroller.com


RabbitWeb and BL2600

Started by therabbitboss in comp.arch.embedded2 months ago 1 reply

Hello, I am currently running BL2600 with Web Server (RabbitWeb). I am little confused with RabbitWeb setup. I DEBUGED and RAN the...

Hello, I am currently running BL2600 with Web Server (RabbitWeb). I am little confused with RabbitWeb setup. I DEBUGED and RAN the SAMPLE RabbitWeb program web.c and it ran with no problem. I was able to successfully access the webpage by simply typing in the Rabbit IP address on my web browser (firefox), but when I run my program and do the same, I don't get the rabbit webpage that I created but ...


Embedded Device as Client, Asp.NET as Server, Rabbit

Started by s74b in comp.arch.embedded7 years ago

Hi, We are planning to design a solution for our embedded product (Chargers) using Rabbit core that supports TCP/IP, Ethernet) as a...

Hi, We are planning to design a solution for our embedded product (Chargers) using Rabbit core that supports TCP/IP, Ethernet) as a client, and an application developed using ASP.NET hosted on the web server (IIS) to monitor and control the client. We are planning that all the clients have static(fixed) IPs so that the web application effectively communicates with the said ...


uCOS-II, rabbit semiconductor, ucos2.lib file, other lib files...

Started by M. vA in comp.arch.embedded13 years ago 6 replies

I have the book, uCOS-II: The real-time kernel, bought before I started using dynamic C (Z-World, rabbit semiconductor, RCM-3000 module). The...

I have the book, uCOS-II: The real-time kernel, bought before I started using dynamic C (Z-World, rabbit semiconductor, RCM-3000 module). The version of Dynamic C I'm using (8.30) did not come with the uCOS-II .LIB files. Is there some way I can use or create the .LIB files (ucos2.lib, os_cfg.lib, others?) from the source code from uCOS CD, or must I buy these .LIB files from Z-world? Do I...


Ordering Rabbit 2000s

Started by Fred in comp.arch.embedded12 years ago 13 replies

Has anyone else tried buying these online through the Rabbitsemi website> zworld for the order to be cancelled without any warning?

Has anyone else tried buying these online through the Rabbitsemi website> zworld for the order to be cancelled without any warning?