Hi, I was wondering if there's any microcontroller with built-in 1394 support i.e. with the appropriate hardware connectivity and a firewire...

Hi, I was wondering if there's any microcontroller with built-in 1394 support i.e. with the appropriate hardware connectivity and a firewire stack in firmware? Google just gave me that MindReady solution which appears to be quite expensive. Thanks in advance Roland

Hi, I dont know if this is the right forum to ask but I would like to know what is firmware testing is all about. I have been asked if I...

Hi, I dont know if this is the right forum to ask but I would like to know what is firmware testing is all about. I have been asked if I am interested in this but have not worked in this area before(I am from hardware background) so please let me know of any links or sites which can give me an idea. thanks, Neo

Hello, I have to debug a very old hardware and I'm looking therefore (without success) for documentation about the 82526. Can anybody help me...

Hello, I have to debug a very old hardware and I'm looking therefore (without success) for documentation about the 82526. Can anybody help me out with the datasheet? Thanks damc4

Hi all, Has anyone used a Low power MCU with 3 hardware UARTs. Any help appreciated. Thanks Niladri Bose.

Hi all, Has anyone used a Low power MCU with 3 hardware UARTs. Any help appreciated. Thanks Niladri Bose.

I have a situation where after performing a halt and re-going on the ICE I am using, one of the interrupts effectively becomes disabled, ie.....

I have a situation where after performing a halt and re-going on the ICE I am using, one of the interrupts effectively becomes disabled, ie.. its like it has become masked, however I have checked the interrupt mask afterwards and its still intact.. And its only one interrupt which is being affected. Maybe a hardware issue.. Its an older system so who knows. Any help appreciated. Thanks in ...

hi anyone has a good site where i can find interfacing the serial EEPROM with my microcontroller? the hardware wiring is pretty simple,...

hi anyone has a good site where i can find interfacing the serial EEPROM with my microcontroller? the hardware wiring is pretty simple, but i'm also looking as to how the MC is going to access the 24C04 in terms of software. any suggestions? - A

Greetings all, As some of you know, I have been programming embedded thingies for quite some time now. Unfortunately, to date, I have never...

Greetings all, As some of you know, I have been programming embedded thingies for quite some time now. Unfortunately, to date, I have never had a need for, or used, an RTOS. Now I am working on some heavy duty stuff, with TI's DM642 DSP in the middle of each (modular) hardware component. Well, it seems that TI's philosophy for documentation is to spread the specific information that one...

I have been watching the PSOC for some time now and I have never had an application where it was remotely applicable. But now I think I...

I have been watching the PSOC for some time now and I have never had an application where it was remotely applicable. But now I think I may have a use for it. I am having trouble finding a good low power MCU that has the peripherals that I need. The PSOC, with its configurable hardware, can morph into whatever I need. In the past when I have looked at the tools, I was not impressed. In ...

Iwo and Wolfgang (=previous contributers), thank you for your informative answers The topic's name is not appropriate so i had to start a...

Iwo and Wolfgang (=previous contributers), thank you for your informative answers The topic's name is not appropriate so i had to start a new one, sorry about that. Perhaps going backwards from the desired solution to the hardware that will allow it is better. Basically what I need is 4-8 DSPS that acquire data at the rate of 25Mbps each and apart from running some algorithms (F...

Hello, I wish to setup a research and development facility for embedded systems controls. I would like you advise me on the hardware,...

Hello, I wish to setup a research and development facility for embedded systems controls. I would like you advise me on the hardware, software and other accessories to be procured. The idea is to encourage research and development work among people with engineering background. Thank you.

So, I'm sitting here making very poor progress on some customer hardware. It's using an ATmega128, because it's an upgrade to an existing...

So, I'm sitting here making very poor progress on some customer hardware. It's using an ATmega128, because it's an upgrade to an existing product. I'm having NO END of trouble trying to get this damned thing working. I think that I need some suggestions from someone who's been down this road before. So, in no particular order, because I'm lost, here: * Toolset is Atmel Studio 7, u...

Hi, i know that this question might have been posted umpteen times here but here's me reiterating it... I am a newbie who wants to embark in to...

Hi, i know that this question might have been posted umpteen times here but here's me reiterating it... I am a newbie who wants to embark in to the (for now) dark world of FPGAs. I dont have access to hardware for now. I have considerable experience with PIC, AVRs. Any directions? --------------------------------------- Posted through http://www.EmbeddedRelated.com

Hello, I am using Xilinx Platform Studio SDK ,Release Version: 8.1.0. I have doubt that, Is it possible to debug and simulate...

Hello, I am using Xilinx Platform Studio SDK ,Release Version: 8.1.0. I have doubt that, Is it possible to debug and simulate software application through SDK without connecting hardware board to it. if any body have answer to it please reply to ss2neeraj@gmail.com

Thanks everyone for helping me out with my previous question. Unfortunately, here's another one. I've managed to connect to my SocketModem...

Thanks everyone for helping me out with my previous question. Unfortunately, here's another one. I've managed to connect to my SocketModem from the modem in my PC. Both are V90s but I can't get a connection rate greater than 33.6K. When I'm on the Net on the PC, the connection speed is either 50.6K or 52.0K so the hardware is definitely capable. Is there some extra set-up that should be don...

If you want to develop custom CAN to ethernet or serial bridging applications we are offering a turn key hardware...

If you want to develop custom CAN to ethernet or serial bridging applications we are offering a turn key hardware solution: http://www.netburner.com/products/can_to_ethernet/cb34ex.html Paul

I want to build a datalogger which can send the data to PC using wireless communication (wireless phone? 802.11?...). Any idea on how to do that...

I want to build a datalogger which can send the data to PC using wireless communication (wireless phone? 802.11?...). Any idea on how to do that in hardware / software?

Hi, I'm designing a board that will have to embed the Opentherm interface. The website www.opentherm.org doesn't say much. I'm looking...

Hi, I'm designing a board that will have to embed the Opentherm interface. The website www.opentherm.org doesn't say much. I'm looking for schematics or hardware specifications. thanks for any help, Enrico

I found an ancient piece of hardware. An old notebook with a 10" 800x600 LCD. Is it hard to drive a notebook LCD with some SBC or FPGA? Are...

I found an ancient piece of hardware. An old notebook with a 10" 800x600 LCD. Is it hard to drive a notebook LCD with some SBC or FPGA? Are there standards for this? Atilla

Greetings! Sorry for the delay in writing. It's been busy with "visitors", lately. It was good seeing all of you -- looking forward to...

Greetings! Sorry for the delay in writing. It's been busy with "visitors", lately. It was good seeing all of you -- looking forward to April! I made the Doppler additions to the demo you saw. You should be able to play with it on your existing hardware. There's a ReadMe that explains the controls. I started porting the OS to a small ARM development board. Goal is to mak

Hi, Can anyone give advice on which is the best (or at least good enough) book on USB. The target audience: electronic engineer that has to...

Hi, Can anyone give advice on which is the best (or at least good enough) book on USB. The target audience: electronic engineer that has to gain knowledge and experience in designing hardware and writing software for embedded systems that use device port and host functionality. Thank You in advance.