I read somewhere that eCos is API compatible with Linux so most Linux software can be compiled and run on eCos. To what extent is this...

I read somewhere that eCos is API compatible with Linux so most Linux software can be compiled and run on eCos. To what extent is this valid? Thanks in advance.

I want to do some vision recogition experiments using an ordinary USB webcam (640x480pixels should be more than sufficient) on eCos. Obviously,...

I want to do some vision recogition experiments using an ordinary USB webcam (640x480pixels should be more than sufficient) on eCos. Obviously, there are no drivers for eCos so I'll have to write my own. Does anyone know if there are USB webcams out there for which the transmitted USB packets are documented?

Hello, We are using ECOS for our embedded system. We currently use 250 threads in the system. We would like to use more than 256, but we...

Hello, We are using ECOS for our embedded system. We currently use 250 threads in the system. We would like to use more than 256, but we think 256 is the maximum for ECOS. Is there any way to increase this to at least 1024? Steve

Hello, All! Does anyone have an experince of working with eCos on XScale architecture. We now have a board supplied with IXP425...

Hello, All! Does anyone have an experince of working with eCos on XScale architecture. We now have a board supplied with IXP425 processor and we are choosing for embedded OS. I know that eCos - IS NOT embedded OS, but is designed for embedded environment. So, I wish to communicate with somebody having experience of working on this platform! With best regards, Roman Mashak...

Dear friends, I am very newbie to this list and also ecos... I have a Integrator /AP (ARM920T) Evaluation Board. It has 128MB...

Dear friends, I am very newbie to this list and also ecos... I have a Integrator /AP (ARM920T) Evaluation Board. It has 128MB SDRAM. Actually m trying to run ecos + application program on it. Basically i dont know th exact procedure to follow.. My Evalutation Board has inbuilt ARM BootPROM. Using that have downloaded prebuilt Redboot to Flash. Redboot is working ...

Hi, I am thinking about putting either eCos or ucOS into the just released Philips ARM7 LPC21xx chip. It has something like 16kB of RAM,...

Hi, I am thinking about putting either eCos or ucOS into the just released Philips ARM7 LPC21xx chip. It has something like 16kB of RAM, 128kB (or 256kB depending on the part) of FLASH on-chip, with no external memory bus. Before going ahead, I would like to have a sanity check: can the porting of eCos or ucOS be done with the resources? It aims to be my hobby project. Just want to try...

Hi Everyone... I have a problem in a compilation process of an applicaiton using eCos complaint GNU gcc compiler. Thought when i compile an...

Hi Everyone... I have a problem in a compilation process of an applicaiton using eCos complaint GNU gcc compiler. Thought when i compile an application,the compiler shows an error message. But the correct program produce the following error. /opt/ecos/gnutools/i386-elf/bin/../lib/gcc-lib/i386-elf/ 3.2.1/../../../../i386-elf/bin/ld: unrecognized option '--out-implib' /opt/ecos/gnutool...

Hello, I just went through compiling eCos for Falcom x35-xxl-si on SuSE Linux 10, and I thought to share the experience in the hopes to save...

Hello, I just went through compiling eCos for Falcom x35-xxl-si on SuSE Linux 10, and I thought to share the experience in the hopes to save some time for someone else. SuSE Linux 10 has gcc 4.x as the native compiler, which apparently was a major source of trouble in compiling the toolchain. I used the eCos online documentation as the primary reference for building the toolchain:...

Hi, i am running ecos release 2.0. under windows. I have a Atmel EB55 development board, however i cannot find the template for the board (using...

Hi, i am running ecos release 2.0. under windows. I have a Atmel EB55 development board, however i cannot find the template for the board (using the gui configuration tool). I can only find the EB40 template. Under the supported hardware section on the ecos site it says that the EB55 is supported. Is there anywhere i can get the new template? Thanks in advance, Chris

Hi there, Anybody have experience in implementing an eCos TCP/IP stack on an ARM? Is a footprint of 200k program memory and 120k data...

Hi there, Anybody have experience in implementing an eCos TCP/IP stack on an ARM? Is a footprint of 200k program memory and 120k data memory reasonable? Seems a little high to me. Without too much eCos experience, I might have expected about half the program memory and 1/4 the data memory. -- Alf Katz alfkatz@remove.the.obvious.ieee.org

Hi, I am monica from germany. I have a newbie query. what is the difference between eCos and redboot? The documentation means redboot as...

Hi, I am monica from germany. I have a newbie query. what is the difference between eCos and redboot? The documentation means redboot as a bootstrap environment. But how can ecos run without redboot bootstrap? Can anybody throw some light on the issue and give me some pointers like which documentation i should go through? Thanks a lot, Monica Dsouza, Germany

We have a project that demands IP connectivity and little bit of simple database stuff that will take about a megabyte of memory. For this...

We have a project that demands IP connectivity and little bit of simple database stuff that will take about a megabyte of memory. For this project, something like eCos seems like a logical solution as it seems to have all the functionality without having the footprint and MMU requirements that Linux has. However, I've never used it before so need a little help in evaluating it against other...

does any one port ecos-RTOS to arm board? ---- http://arm.web7days.com

does any one port ecos-RTOS to arm board? ---- http://arm.web7days.com

I about to embark on porting eCos to the ARM-based Phillips LPC2194 controller. Does anyone know if this (or similar) has been done...

I about to embark on porting eCos to the ARM-based Phillips LPC2194 controller. Does anyone know if this (or similar) has been done already? This message was sent using the comp.arch.embedded web interface o www.EmbeddedRelated.com

Hello, I need for a new project a free small OS for the Intel xScale architecture (strong ARM) IOP80331. I consider both eCos and uClinux and...

Hello, I need for a new project a free small OS for the Intel xScale architecture (strong ARM) IOP80331. I consider both eCos and uClinux and the driver requirement is minimal. Can somone point out the highlights and lowlights of each of them with recomandation e.g. learning curve, development tools, ports etc. Thank, Ram

Is anybody familiar with building eCos applications for the linux = synthetic target? --=20 Karsten P. Hoffmann 3M Deutschland...

Is anybody familiar with building eCos applications for the linux = synthetic target? --=20 Karsten P. Hoffmann 3M Deutschland GmbH (no replies to the given email address please, it's just a spam = collector :-) )

Hello, When starting configtool.exe or running ecosconfig new pc, I get the following error, not sure how to fix it, anyone has run into the...

Hello, When starting configtool.exe or running ecosconfig new pc, I get the following error, not sure how to fix it, anyone has run into the same problem? any help would be appreciated. thanks, output ========= ecos.db, package CYGPKG_HAL_FRV_FRV400: warning This package does not have any valid version subdirectories. ecos.db, package CYGPKG_DEVS_ETH_FRV_FRV400: warning ...

Hi there, Currently, i am working on porting the Protocol stack of UTMS to eCos RTOS using x86 processor. I have a problem in with the...

Hi there, Currently, i am working on porting the Protocol stack of UTMS to eCos RTOS using x86 processor. I have a problem in with the message Queues.Our system suppost the Message queues as it is provided in the Xenomai RTOS.I.e. rt_queue_create() . Though i know,how to design my own to work with it; but i need some bult in soultion. Regards, Engr. Jawad Rehman Embedded Software Engi...

Hello, I'm trying to get a GPRS PPP connection going in eCos using the LwIP stack, but no luck so far. It seems that my provider and the...

Hello, I'm trying to get a GPRS PPP connection going in eCos using the LwIP stack, but no luck so far. It seems that my provider and the LwIP PPP code do not understand each other. I', trying to find examples of correct communication but have had no luck so far and RFC1661 is a bit hard to decode. Does anyone know good links to information on this subject? Google has not come up with ma...

Hi there, I have a problem in to add a static library with an application executable for eCos. Actually I have two projects and have made...

Hi there, I have a problem in to add a static library with an application executable for eCos. Actually I have two projects and have made three cmake files for both the project. One is to include the sub folders for the projects and second is for the project to create a static library by using cmake add_library statement and third cmake file is for the other project to build the executabl...